Pieds de réglage

?* À propos du délai d'expédition et des prix

• • En promotion

  

  Dispositif de réglage pour charges lourdes (modèle à vis longue) D-C-L / D-C-L S

  DAIWARASHI

  A long screw adjuster with a wide adjustment range
  
  [Features]
  · Although the dimensions in the table are in increments of 50 mm, dimensions can be cut as desired upon request.
  A limited quantity of 500 mm total length products are available for M16 and M20.
  · D-C-LS has a luxurious feel since the surface of the receiver is grind-processed with a lathe.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	33.35 €
  	Prix spécial
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Dispositifs de réglage pour charges lourdes avec caoutchouc D-C-R

  DAIWARASHI

  A rubber equipped type adjuster for medium loads
  
  [Features]
  · Receiver features a chloroprene rubber coating.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	31.36 €
  	Prix spécial
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Pied de réglage, charge lourde (fixation de palier) D-H

  DAIWARASHI

  An adjuster for heavy weights with a built-in thrust bearing
  
  [Features]
  · Suitable for the adjustment of heavy machinery.
  · Stability is outstanding since a large diameter bolt is used.
  · Smooth adjustments can be made even for non-heavy machinery.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	107.43 €
  	Prix spécial
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Dispositifs de réglage avec base en caoutchouc pour amortisseur de vibrations léger D-AIII / D-AIII et R / D-AIII et SI / D-BIII / D-BIII et FR / D-BIII et SI

  DAIWARASHI

  An adjuster for light vibration-proofing equipped with rubber on the back side of the adjuster base. Note: Please be advised that the model number in VONA has been changed from "D-A III" to "D-A3."
  
  [Features]
  · Since the rubber part comes in contact with the floor, floor damage is prevented.
  · A light vibration-proof type adjustment bolt.
  · However, since the rubber hardness is 80°, repulsion is higher than low elasticity rubber and does not demonstrate much of a vibration-proofing effect. For this reason, please compare with other vibration-proof types such as the D-G series when using.
  · Can easily be mounted using a screwdriver since a Phillips head slot has been provided on the bottom of the bolt.
  · A nylon washer is used between the receiver and bolt, and rotation is smooth.
  · The FR type uses non-migratory rubber so traces of rubber do not remain when moving the machinery.
  · The SI type is white and is characterized by hardly leaving traces of rubber.
  · Suitable for office equipment, etc.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	10.07 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Réceptacle de dispositif de réglage standard, modèle D-A / D-B

  DAIWARASHI

  The most general standard type adjuster
  
  [Features]
  · The screw shaft rotates and tilts somewhat.
  · A standard type that can be used as the adjustment bolt for any machinery.
  · The affordable standard receiver type is recommended when using in large numbers, such as for the legs of a conveyor.
  · D-A supports screw diameters M16 and M20, and D-B supports screw diameter M12.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	8.54 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Dispositifs de réglage avec blocage de vis pour fixation d'ancrage D-J-EII

  DAIWARASHI

  An adjuster for anchor fixing in which the horizontal shaking of the screw shaft part is completely locked. Note: Please be advised that the model number in VONA has been changed from "D-J-E II" to "D-J-E2."
  
  [Features]
  · The structure is such that some space exists between the receiver and bolt.
  · This is the result of our efforts to enable bolts to move smoothly even if the floor surface is somewhat tilted.
  · It has been pointed out in the past that this may cause bolt looseness to occur when the upper portion of a conveyor vibrates, possibly resulting in significant machinery movement caused by shaking when the conveyor stops.
  · It is for this reason that we came up with the D-J type, which is suitable for use when the top portion of machinery such as a conveyor vibrates and moves slightly.
  · Even when a running machine is stopped, the bolts will not move and falling over will not occur.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	33.18 €
  	Prix spécial
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Réceptacle de pied de réglage standard, petit diamètre D-F / D-F-C

  DAIWARASHI

  An adjuster whose screw and base have small diameters
  
  [Features]
  · Similar to the D-A and D-B types, it is structured so that a nut is pressed into the bolt protrusion inside the receiver, eliminating worries regarding the receiver falling off.
  · Manufactured to enable some play between the screw part and receiver, enabling its use on surfaces with a slight slope.
  · A light load type with a receiver diameter that is also small.
  · Thanks to the plastic coating on the outer circumference of the receiver, floors are not stained or damaged.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	5.60 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Niveleur, modèle FAJK

  NABEYA

  [Features]
  · A semi-order type in which bolt diameter, bolt length, and pad diameter are selected and combined.
  · Can be fixed using an anchor bolt.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	31.10 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Niveleur, modèle FAS

  NABEYA

  A semi-order type in which bolt diameter, bolt length, and pad diameter can be selected and combined.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	18.34 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Niveleur, modèle FAJ

  NABEYA

  A semi-order type in which bolt diameter, bolt length, and pad diameter can be selected and combined.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	29.44 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Niveleur, modèle FAK

  NABEYA

  [Features]
  · A semi-order type in which bolt diameter, bolt length, and pad diameter are selected and combined.
  · Can be fixed using an anchor bolt

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	27.76 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Dispositifs de réglage pour fixations d'ancrage D-EII / D-EII-ST

  DAIWARASHI

  A standard item adjuster bolt for anchor fixing. Note: Please be advised that the model number in VONA has been changed from "D-E II" to "D-E2."
  
  [Features]
  · Similar to D-A, it is structured so that fixing of the receiver and bolt is performed by placing the bolt protrusion into the receiver and pressing a nut into it.
  · Can easily be fixed using an anchor bolt.
  · Please use an anchor bolt.
  · Please use a 12 mm anchor bolt.
  · Bolts shorter than 12 × 70 are not recommended for complete fixing due to safety concerns.
  · Note: The screw rotates and tilts somewhat.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	17.43 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Dispositif de réglage pour charge lourde D-C / D-C, S

  DAIWARASHI

  A standard type adjuster for heavy loads
  
  [Features]
  · The receiver is a forged item.
  · Since it is a mold release surface that has undergone hot forging, unevenness does not stand out, unlike mold casting.
  · D-C-S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.
  · Since the receiver is forged, it features a load resistance of 10 tons or more. However, since the screw is buckled first, load resistance depends on the screw diameter.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	19.14 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Dispositifs de réglage pour charges lourdes (modèle à réceptacle large) D-CIII / D-CIII, S / D-CIII-W

  DAIWARASHI

  A wide base type adjuster for heavy weights that is stable and that can distribute the load to the floor. Note: Please be advised that the model number in VONA has been changed from "D-C III" to "D-C3."
  
  [Features]
  · The receiver of the stainless steel D-C III is a forged item.
  · D-C III S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	56.26 €
  	Prix spécial
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Réceptacle de dispositif de réglage standard avec plastique D-AII / D-BII

  DAIWARASHI

  A standard type adjuster with plastic that does not damage the floor. Note: Please be advised that the model number in VONA has been changed from "D-A II" to "D-A2."
  
  [Features]
  · Does not stain or damage floors since a special plastic is molded into the receiver.
  · The plastic part has elasticity, feels good to touch, and features excellent aging resistance and temperature resistance.
  · Suitable for any machinery or office equipment since the external appearance also features a beautiful finish.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	15.78 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Dispositif de réglage pour surfaces murales D-DI

  DAIWARASHI

  A base cut type adjuster that does not protrude from the upper part and that prevents interference with other parts. Note: Please be advised that the model number in VONA has been changed from "D-D I" to "D-D1."
  
  [Features]
  · A special adjuster for walls.
  · Please use together with D-D II.
  · Please use accessories such as hex nuts, etc.
  · The portion that makes contact with the wall is folded.
  · As a result, the structure features a load resistance that is dramatically higher than products from other manufacturers in which the receiver is cut.
  · In terms of its relation to the wall surface, the bolt hole has undergone special machining different from that of normal catch plates.
  · Please refer to the drawings for use.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	24.51 €
  	Prix spécial
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Pied de réglage de niveau (KA)

  IMAO CORPORATION

  Excellent cost performance
  
  [Features]
  · The SUS-made product features superior corrosion resistance and water resistance.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	8.22 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Pied de réglage de niveau (type ancrage) (KAF)

  IMAO CORPORATION

  Excellent cost performance
  
  [Features]
  · The SUS-made product features superior corrosion resistance and water resistance.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	19.75 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

Loading...