Flexibles
?* À propos du délai d'expédition et des prix
-
Tuyaux flexibles résistants à la chaleur - Pour générateurs d'air chaud
MISUMI
- Fichiers CAD 2D / 3D disponibles
Configurer maintenantDélai d'expédition minimum ： 7 jours -
Configurer maintenant
Délai d'expédition minimum ： 7 jours -
Configurer maintenant
Délai d'expédition minimum ： 7 jours -
Modèle compact de flexible à plaque d'acier galvanisé (fer flexible)
KURIMOTO
Thin zinc plating steel plate flexible duct. It has been compressed to 1 m: Extend it before use. [Please study the safety precautions in the catalog.] Sold individually, starting from one unit.Configurer maintenantà partir de∗ ： 31.45 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Configurer maintenant
Délai d'expédition minimum ： 7 jours -
Flexible ignifuge, modèle P
TIGERS POLYMER
Because this product has flame retardant qualities equivalent to UL-HB as well as the same structure as the P type, it provides superior elasticity.
[Features]
· Produced by adding flame retardance to the Tie Flex Hose P Type.
· Flame retardance is UL94-HB-equivalent.
· Features superior elasticity due to shared structure with the P type (shrinkage ratio 1/3 to 1/4).
· Lightweight and freely bendable.
· Accordingly, piping construction is also made easy, which improves construction workability and saves labor.
· A dedicated flame retardant end is also providedConfigurer maintenantà partir de∗ ： 120.17 € Délai d'expédition minimum ： 9 jours *Prix unitaire/configuration de base
-
Configurer maintenant
à partir de∗ ： 26.19 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Conduit TAC, AS
TOTAKU INDUSTRIES
TAC SD-AS duct type. Maintains an anti-static effect via the use of a special blended soft resin.
[Features]
TAC SD-AS duct type.
Maintains an anti-static effect via the use of a special blended soft resin.Configurer maintenantDélai d'expédition minimum ： 11 jours -
Conduit Ti-duct, modèle N
TIGERS POLYMER
Metal wire is used for reinforcement, and since thermal deformation is reduced, the hose has good flexibility.
[Features]
· Lightweight and portable.
・It has high flexibility.
· It has superior chemical resistance properties for acids and alkaline etc.
・Metal wires in the core wires reduce heat deformationConfigurer maintenantDélai d'expédition minimum ： 10 jours -
Configurer maintenant
Délai d'expédition minimum ： 7 jours -
Configurer maintenant
Délai d'expédition minimum ： 7 jours -
Conduit flexible Conduit N.S.D.
KANAFLEX CORPORATION
The weight of the duct has been successfully reduced by 40% compared to conventional PVC ducts. A smooth inner surface design with increased ventilation and exhaust efficiency. This product has excellent antistatic effectiveness with a heat-resistance performance to prevent deformation at high temperatures.
[Features]
· The NSD duct provides a 40% weight reduction compared to conventional PVC ducts.
· Easy to carry to increase work efficiency.
· The inner surface of the NSD duct has been smoothed to a smoothness that is equivalent to PVC duct with increased ventilation and exhaust efficiency.
· In a heat-test experiment, the NSD and PVC ducts were secured into a U-shape inside a constant-temperature room. The temperature inside the room was gradually increased. The PVC duct deformed at 60℃, whereas the NSD duct did not.
· The NSD duct is a hose that has an antistatic effect due to antistatic agents that have been incorporated into the hose material.Configurer maintenantDélai d'expédition minimum ： 10 jours -
Conduit, conduit dur N.S.
KANAFLEX CORPORATION
[Features]
· PVC Product.
· Excellent heat resistance.
· Structure has less bends due to temperature change.
· Flexible bendable hose.
· At least 10% lighter than existing hard ducts.
· Up to 50% elastic so as not to damage the airtightness.
· Aperture will change just by twisting the opening of the duct.
· Can be easily cut with a knife, and can be connected by just inserting the opening of the duct and wreathing with tape.
· Cutting and mounting are easy and piping work can be performed easily.Configurer maintenantDélai d'expédition minimum ： 56 jours -
Conduit modèle D
KANAFLEX CORPORATION
[Features]
· A general-purpose duct hose with abundant applications and excellent quality and reliability.
· Easy cutting and mounting facilitates easy piping.Configurer maintenantDélai d'expédition minimum ： 16 jours -
Conduit modèle EE
KANAFLEX CORPORATION
[Features]
▪ Low internal resistance and high transportability.
· Easy to bend, lightweight, and work-efficient.
· Easy cutting and mounting facilitates easy piping.Configurer maintenantDélai d'expédition minimum ： 9 jours -
Conduit aluminium New Kana
KANAFLEX CORPORATION
[Features]
· Superior heat resistance with a reinforced cord.
▪ Light in weight, flexible, and labor-saving.
· Cutting and mounting are easy and piping work can be performed easily.Configurer maintenantDélai d'expédition minimum ： 11 jours -
Conduit flexible modèle T
KANAFLEX CORPORATION
Lightweight and expands/contracts freely. Goes down to 1/3-1/4 of its length, minimizing storage space before mounting. Easy Cutting/mounting for simple pipe work.Configurer maintenantà partir de∗ ： 127.12 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Conduit résistant à l'huile
KANAFLEX CORPORATION
Has little internal resistance, therefore allowing for substantial transport capacity. Made from special oil-resistant vinyl chloride for excellent resistance to lubricating oil, cutting oil, and other oils. Cutting and mounting are easy and piping work can be performed easily.Configurer maintenantDélai d'expédition minimum ： 16 jours -
Conduit métallique (MD18)
KANAFLEX CORPORATION
Uses a reinforced core of aluminum foil, glass cross, and SPTE. A lightweight and flexible duct for easy stowing, storage, and transportation.Configurer maintenantà partir de∗ ： 137.79 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Conduit métallique (MD25)
KANAFLEX CORPORATION
[Features]
· Employs a reinforcing core containing a stainless steel plate (SUS304) and specially coated glass cloth.
· Lightweight and flexible ducting which makes storing and transportation easy.
· Specially coated glass cloth which is used is highly elastic and flame resistant.
· Cutting and mounting are easy and piping work can be performed easilyConfigurer maintenantà partir de∗ ： 329.71 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Conduit aluminium Kana
KANAFLEX CORPORATION
[Features]
▪ Flexible, bendable, and easy piping in narrow spaces.
▪ Shrinkage to 1/10 and can be stowed compactly (II type).
▪ Lightweight and portable.
▪ Hose saves inventory and transportation space.
· Cutting and mounting are easy and piping work can be performed easily.Configurer maintenantà partir de∗ ： 81.31 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Conduit aluminium Kana modèle II
KANAFLEX CORPORATION
Flexible and bendable, for easy deployment in tight spaces. Can be stowed at 1/10 its full extended length. Lightweight and portable. Lets you save inventory and transportation space.Configurer maintenantà partir de∗ ： 81.79 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Conduit isolant S
KANAFLEX CORPORATION
[Features]
· This duct hose is for ventilation of highly insulated, airtight houses.
· High thermal insulation effect prevents condensation.
· Lightweight and flexible. Smaller outer case, compared to glass wool ducts. Easy to cut. Great workability.
· Single and double types available.Configurer maintenantDélai d'expédition minimum ： 14 jours -
Configurer maintenant
Délai d'expédition minimum ： 11 jours -
Configurer maintenant
Délai d'expédition minimum ： 11 jours -
Conduit TAC, D
TOTAKU INDUSTRIES
Used for transmission and exhaust in facilities and equipment. Bends easily, is lightweight, and was developed to be labor-saving.
[Features]
Achieves labor savings due to bendability and low weight.
· Cutting and mounting are easy and piping work can be performed easily.Configurer maintenantDélai d'expédition minimum ： 11 jours -
Conduit TAC, EE
TOTAKU INDUSTRIES
A popular type of TAC DUCT-D. Less internal resistance compared with DUCT-D, and good transportability is obtained.- Remise sur volume
Configurer maintenantDélai d'expédition minimum ： 11 jours -
Conduit TAC, aluminium
TOTAKU INDUSTRIES
For ventilator ducts and air conditioning in housing, apartments, stores, etc. Flexible, bendable piping for easy use in narrow spaces. Can be shortened to around 1/5 of its original length for compact storage.
[Features]
· Superior in terms of flexibility and bending properties, so it can be laid in narrow spaces.
· TAC Duct Aluminum can be compressed to 1/5 of its original length, while TAC Duct Aluminum 2 can be compressed to 1/10 of its original length, allowing compact, space-saving storage.
· Repeatedly bendable. Excellent heat resistance (up to 80°C)Configurer maintenantDélai d'expédition minimum ： 11 jours -
Conduit fibres TAC
TOTAKU INDUSTRIES
[Features]
▪ It can be stretched due to reinforced cord, and has excellent bending durability.
▪ Ivory white colored ring that changes the image of vinyl duct, matches the new equipment.Configurer maintenantDélai d'expédition minimum ： 10 jours -
Conduit TAC transparent
TOTAKU INDUSTRIES
Transparent TAC duct EE allows the user to verify what is being transported.Configurer maintenantDélai d'expédition minimum ： 11 jours -
Conduit TAC Helan
TOTAKU INDUSTRIES
Duct hose with 2 times the wear resistance of TAC ducting (according to internally conducted testing). Superior cold and heat resistance and anti-static properties. Duct hose not easily subject to ozone cracking.
[Features]
Is wear resistant and has superior cold and heat resistance (operating temperature range is -30°C to 80°C).
· Duct hose with superior anti-static properties (material volume resistivity/105 Ω-cm or less).
· Duct hose resistant to ozone cracking that can occurs in conventional rubber hosesConfigurer maintenantDélai d'expédition minimum ： 10 jours -
Conduit rigide TAC PP
TOTAKU INDUSTRIES
Duct hose for spot coolers. Can be bent freely, and is able to sustain bent states. Furthermore, the opening diameter can be changed by twisting.
[Features]
· 10 to 20% lighter than conventional (PVC) products .
· Can be bent freely, and is furthermore able to sustain bent states (please use indoors and note that as use temperatures increase, the product’s ability to keep its shape declines).
· The opening diameter can be changed by twisting the opening.
· Can be cut with knives etc.
· Ducts can be connected easily by screwing their openings together (please wrap joints with vinyl tape after connecting ducts).
· Ducts may be incinerated after use.Configurer maintenantDélai d'expédition minimum ： 11 jours -
Conduit de détente TAC
TOTAKU INDUSTRIES
Duct hose capable of telescoping that can be secured flexibly at any angle in any direction (however, holding force is reduced according to the aperture diameter). Can be shortened to 1/3 - 1/4 of its original length.
[Features]
· Excellent oil resistance.
· Ivory color matches typical equipment.
· Lightweight with superior bend resistance.
· High efficiency due to low interior resistance, which contributes to energy savings.Configurer maintenantDélai d'expédition minimum ： 11 jours -
Conduit TAC résistant à l'huile
TOTAKU INDUSTRIES
A duct hose with superior oil resistance that can be used for suction and discharge of oil mist.Configurer maintenantDélai d'expédition minimum ： 11 jours -
Conduit TAC résistant à la chaleur IT-13 (tuyauterie libre)
TOTAKU INDUSTRIES
[Features]
- Duct formed with aluminum polyester cloth and zinc-plated steel. Supports temperatures of 130°C or below.
- Uses special laminated film to reduce particles created by surface friction.
- Flexible and easy to store/transport.Configurer maintenantà partir de∗ ： 219.58 € Délai d'expédition minimum ： 11 jours *Prix unitaire/configuration de base
-
Conduit TAC résistant à la chaleur MD-18 (tuyauterie montée)
TOTAKU INDUSTRIES
[Features]
· A reinforcing core of galvanized steel sheeting, glass cloth and aluminum foil is used, making possible use at temperatures of 180°C or lower.
· Flexible and easy to store and transport (avoid repeated expansion and contraction)
· The aluminum glass cloth sheeting used is highly flame-resistant (Flameproof Grade 1).Configurer maintenantDélai d'expédition minimum ： 11 jours -
Conduit TAC résistant à la chaleur MD-25 (tuyauterie libre)
TOTAKU INDUSTRIES
[Features]
· Uses specially coated glass cloth and a stainless steel plate (SUS304) reinforcing core, and can be used at 250°C or below.
· Flexible and easy to store and transport.
· The specially coated glass cloth used for the product has excellent flame retardant properties (product passed level 1 fireproofing testing)Configurer maintenantDélai d'expédition minimum ： 11 jours -
Flexible TAC résistant à la chaleur MD-45 (tuyauterie fixe)
TOTAKU INDUSTRIES
[Features]
· All of components used are made of stainless steel (SUS304), have superior heat resistance performance, and can be used at 450°C or below.
· The materials are not prone to corrosion even from gases containing acids, alkaline substances, solvents, etc.
· This product is designed for fixed piping, but it is also possible to create bends (repeated bending is not supported).Configurer maintenantDélai d'expédition minimum ： 11 jours -
Conduit de soufflets
TOTAKU INDUSTRIES
Features large diameter opening yet is lightweight and can be freely shortened or elongated and can be stored compactly at approximately 1/3 of its full size. Can be used for ventilation, exhaust and dust collection applications in various areas such as construction areas inside manholes or tunnels.
[Features]
Can be freely shortened or elongated and can be stored compactly at approximately 1/3 of its full size.
Features large diameter opening yet is lightweight and is easy to transportConfigurer maintenantDélai d'expédition minimum ： 11 jours -
Conduit Ti-duct, modèle GL
TIGERS POLYMER
Features a smooth inner surface and little ventilation loss. Exhaust feed hose for woodworking machinery, dusters, and general dust collectors.
[Features]
· Lightweight and portable.
· Highly flexible.
· Features superior chemical resistance against acids, alkali materials, etc.
· High transport capacity is achieved due to low airflow resistanceConfigurer maintenantDélai d'expédition minimum ： 9 jours -
Conduit Ti-duct résistant à l'abrasion, modèle GL
TIGERS POLYMER
A tie duct hose GL type hose with superior wear resistance that can be used at a wide range of temperatures from -30°C to 80°C. Also has an anti-static effect.
[Features]
· Has superior wear resistance and can be used in a wide variety of temperatures (approximately -30°C to 80°C).
Has superior conductivity and a static band prevention effect.
· Has superior weather resistance.
· Suited to the transport of powders and granular material, dust collection, and feeding high temperature exhaust.Configurer maintenantDélai d'expédition minimum ： 10 jours -
Conduit Ti-duct résistant à l'huile, modèle GL
TIGERS POLYMER
Uses a special oil-resistant material (soft part of the hose) that is not hardened by lubricating oil, cutting oil, etc. Used for oil mist recovery on manufacturing machinery such as lathes and milling cutters.Configurer maintenantDélai d'expédition minimum ： 10 jours -
Conduit Ti-duct, modèle GL-E
TIGERS POLYMER
GL type tie duct antistatic hose that includes a grounding wire. Transparent, allowing transported materials to be confirmed. Indoor piping duct for clean rooms, etc.Configurer maintenantDélai d'expédition minimum ： 10 jours -
Conduit Ti-duct, modèle GL-ST
TIGERS POLYMER
A transparent antistatic type of tie duct hose. For indoor aerial transportation of soot, piping in clean rooms, etc.Configurer maintenantDélai d'expédition minimum ： 10 jours -
Flexible Tiflex, modèle P
TIGERS POLYMER
Flexible, lightweight, and freely bendable. Shrinks to a third or fourth of its size, improving transport efficiency and saving storage space.Configurer maintenantà partir de∗ ： 76.41 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
| Marque |
|---|
| Série du produit |
| CAD |
| à partir de∗ |
| Délai d'expédition minimum |
| Matériau |
| Utilisation du service de découpe |
| Propriétés |
| D.I. d(mm) |
| D.E. D(mm) |
| Couleur |
| Fluide applicable |
| Pression admissible max. (inférieure à la température ambiante)(MPa) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Marque | MISUMI | MISUMI | MISUMI | KURIMOTO | MISUMI | TIGERS POLYMER | MISUMI | TOTAKU INDUSTRIES | TIGERS POLYMER | MISUMI | MISUMI | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER |
| Série du produit | Tuyaux flexibles résistants à la chaleur - Pour générateurs d'air chaud | Modèle compact de flexible à plaque d'acier galvanisé (fer flexible) | Conduit TAC résistant à la chaleur MD-18 (tuyauterie montée) | ||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
| à partir de∗ | - | - | - | 31.45 € *Prix unitaire/configuration de base | - | 120.17 € *Prix unitaire/configuration de base | 26.19 € *Prix unitaire/configuration de base Remise sur volume | - | - | - | - | - | - | - | - | - | 127.12 € *Prix unitaire/configuration de base | - | 137.79 € *Prix unitaire/configuration de base | 329.71 € *Prix unitaire/configuration de base | 81.31 € *Prix unitaire/configuration de base | 81.79 € *Prix unitaire/configuration de base | - | - | - | - | - Remise sur volume | - | - | - | - | - | - | - | 219.58 € *Prix unitaire/configuration de base | - | - | - | - | - | - | - | - | - | 76.41 € *Prix unitaire/configuration de base |
| Délai d'expédition minimum | 7 jours | 7 jours | 7 jours | 5 jours | 7 jours | 9 jours | 5 jours | 11 jours | 10 jours | 7 jours | 7 jours | 10 jours | 56 jours | 16 jours | 9 jours | 11 jours | 6 jours | 16 jours | 6 jours | 6 jours | 6 jours | 6 jours | 14 jours | 11 jours | 11 jours | 11 jours | 11 jours | 11 jours | 10 jours | 11 jours | 10 jours | 11 jours | 11 jours | 11 jours | 11 jours | 11 jours | 11 jours | 11 jours | 11 jours | 9 jours | 10 jours | 10 jours | 10 jours | 10 jours | 6 jours |
| Matériau | Aluminium / Verre à revêtement spécial / Acier inoxydable | Polypropylène | PVC | Acier | Polypropylène / PVC | Résine oléfine | Aluminium | PVC | PVC | Polypropylène | Polypropylène | Élastomère | Résine oléfine | PVC | PVC | PVC | Résine oléfine | PVC | Aluminium | Verre à revêtement spécial | Aluminium | Aluminium | PVC | Élastomère | Élastomère | PVC | PVC | Aluminium | PVC | PVC | Polypropylène | Polypropylène | Polypropylène | PVC | Aluminium | Aluminium | Verre à revêtement spécial | Acier inoxydable | PVC | PVC | EPDM | PVC | PVC | PVC | Résine oléfine |
| Utilisation du service de découpe | - | - | - | Numéro | - | Numéro | - | Oui | Oui | - | - | Oui | Oui | Oui | Oui | Oui | Numéro | Oui | Numéro | Numéro | Numéro | Numéro | Oui | Oui | Oui | Oui | Oui | Numéro | Oui | Oui | Oui | Oui | Numéro | Oui | Numéro | Numéro | Numéro | Numéro | Oui | Oui | Oui | Oui | Oui | Oui | Numéro |
| Propriétés | Résistance aux flammes / Résistance à la chaleur / Faible production de particules | Résistance à l'abrasion / Basse temp. Résistance | Résistance à l'huile | Résistance aux flammes / Flexibilité | Standard | Standard / Résistance aux flammes / Autres | Standard | Performance antistatique | Standard / Flexibilité | Standard / Performance antistatique | Standard | Standard / Performance antistatique / Résistance à la chaleur | Standard / Résistance à la chaleur | Standard | Standard | Standard | Standard | Standard / Résistance à l'huile | Standard / Résistance aux flammes | Standard / Résistance aux flammes | Standard | Standard | Standard | Standard / Résistance à l'abrasion / Flexibilité | Standard / Performance antistatique / Résistance à l'abrasion | Standard | Standard | Standard / Résistance à la chaleur | Standard | Standard | Standard / Performance antistatique / Résistance à l'abrasion / Basse temp. Résistance / Résistance à la chaleur | Standard | Standard | Standard / Résistance à l'huile | Standard / Résistance à la chaleur / Faible production de particules | Standard / Résistance aux flammes / Résistance à la chaleur | Standard / Résistance aux flammes / Résistance à la chaleur | Standard / Résistance à la chaleur | Standard | Standard / Flexibilité | Résistance à l'abrasion / Résistance à la chaleur | Résistance à l'huile / Flexibilité | Performance antistatique | Performance antistatique / Flexibilité | Standard / Flexibilité / Autres |
| D.I. d(mm) | 50 ～ 152 | 38 ～ 152.4 | 76.4 ～ 152.4 | - | 35 ～ 152.4 | 37.5 ～ 302 | 39 ～ 150 | 32.4 ～ 152.4 | 16.7 ～ 204.1 | 38 ～ 152.4 | 75 ～ 100 | 38.1 ～ 125.9 | 65 ～ 90 | 32.4 ～ 64 | 32.4 ～ 114.3 | 32 ～ 303 | 70 ～ 79 | 76.4 ～ 203.7 | 51 ～ 101.5 | 51 ～ 126.5 | 42.7 ～ 128 | 109 ～ 131.4 | 100.3 | 32 ～ 303 | 38 ～ 152.4 | 32.4 ～ 303 | 32.4 ～ 303 | 39 ～ 300 | 32 ～ 203.7 | 37.3 ～ 203.7 | 38 ～ 303 | 90 ～ 300 | 35 ～ 145 | 50.6 ～ 203.2 | 102.5 | 51 ～ 303 | 51 ～ 253 | 52.5 ～ 303.5 | 400 ～ 500 | 25 ～ 303 | 38.1 ～ 208 | 38.1 ～ 202 | 50.8 ～ 152.4 | 25 ～ 152.4 | 37.5 ～ 302 |
| D.E. D(mm) | 54.5 ～ 157 | 46.8 ～ 166.2 | 86.4 ～ 164.8 | - | 42 ～ 164.8 | 41.5 ～ 308 | 45 ～ 155.7 | 38.6 ～ 164.8 | 21.2 ～ 211.5 | 45 ～ 164 | 82.4 ～ 107.4 | 44.5 ～ 137 | 71.8 ～ 96.8 | 38.6 ～ 73.2 | 38.6 ～ 125.3 | 39.2 ～ 320 | 73 ～ 82 | 86.4 ～ 217.1 | 55 ～ 105.5 | 55 ～ 130.5 | 45 ～ 130.3 | 111.4 ～ 133.7 | 118 | 38 ～ 322 | 45 ～ 164 | 38.6 ～ 316 | 38.6 ～ 318 | 45 ～ 305.9 | 40 ～ 217.5 | 44.5 ～ 217.1 | 46.8 ～ 328.2 | 97.4 ～ 309.6 | 42 ～ 158 | 60.2 ～ 216.5 | 106 | 54.5 ～ 306.5 | 54.5 ～ 256 | 56 ～ 306.5 | 418 ～ 520 | 32.4 ～ 316.4 | 46 ～ 223 | 45.9 ～ 215 | 59.9 ～ 168.8 | 32.4 ～ 163.8 | 41.5 ～ 308 |
| Couleur | - | Noir | Ivoire | Gris | - | Noir | - | Transparent | Gris | Transparent | - | Gris | Gris | Gris | Gris | Blanc | Blanc | Gris | Gris | Gris | - | - | Blanc | Transparent | Transparent | Gris | Gris | Couleur du métal | Ivoire | Transparent | Noir | Gris | Blanc | Ivoire | Couleur du métal | Blanc | Gris | Couleur du métal | Gris | Gris | Noir | Ivoire | Transparent | Transparent | Marron foncé |
| Fluide applicable | Produit chimique / Air / Étincelles | Poudre / Graines / Air / Morceaux de papier | Air / Brouillard d'huile | - | Air | Air | Air | Graines / Air | Produit chimique / Poudre / Air | Air | Air | Air | Air | Air | Air | Air | Air | Huile d'usinage / Lubrifiant / Air / Brouillard d'huile | Air | Air / Étincelles | Air | Air | Air | Air | Poudre / Air | Air | Air | Air | Air | Poudre / Graines / Air | Poudre / Graines / Morceaux de papier | Air | Air | Air / Brouillard d'huile | Air | Air | Air / Étincelles | Produit chimique / Air | Air | Produit chimique / Poudre / Air | Poudre / Graines / Air / Morceaux de papier | Huile d'usinage / Lubrifiant / Brouillard d'huile | Poudre | Poudre | Air |
| Pression admissible max. (inférieure à la température ambiante)(MPa) | 0.006 ～ 0.027 | 0.03 | 0.04 | - | 0.002 ～ 0.06 | 0.002 ～ 0.018 | 0.02 | 0.02 ～ 0.06 | 0.01 ～ 0.06 | 0.04 | 0.001 | 0.02 ～ 0.06 | - | 0.04 ～ 0.06 | 0.03 ～ 0.06 | 0.02 ～ 0.1 | - | 0.01 ～ 0.04 | 0.007 | 0.007 | 0.01 ～ 0.02 | 0.01 | 0.004 | 0.01 ～ 0.04 | 0.02 ～ 0.04 | 0.01 ～ 0.06 | 0.01 ～ 0.06 | 0.007 ～ 0.02 | 0.02 ～ 0.1 | 0.01 ～ 0.06 | 0.005 ～ 0.03 | - | - | 0.01 ～ 0.05 | 0.007 | 0.007 | 0.007 | 0.007 | 0.003 ～ 0.004 | 0.01 ～ 0.06 | 0.01 ～ 0.05 | 0.01 ～ 0.06 | 0.02 ～ 0.05 | 0.02 ～ 0.06 | 0.002 ～ 0.018 |
Loading...
Filtrer par :
Stock
-
- Afficher les articles en stock uniquement
-
Matériau
-
Utilisation du service de découpe
-
Propriétés
-
D.I. d(mm)
- 10
- 16.7
- 19.5
- 25
- 25.4
- 25.5
- 31.8
- 32
- 32.4
- 32.5
- 35
- 37.3
- 37.5
- 38
- 38.1
- 38.5±0.5
- 39
- 41
- 42.7
- 50
- 50.5±1.0
- 50.6
- 50.8
- 50.9
- 51
- 52.5
- 53.0
- 53.5
- 62.4
- 63
- 63.5
- 64
- 64.5±1.0
- 65
- 65.5
- 66
- 66.2
- 67
- 67.5
- 68.0
- 70
- 71.0
- 75
- 75.5
- 75.9
- 76
- 76.2
- 76.4
- 76.5
- 78.0
- 79
- 83
- 88.9
- 89
- 89.8
- 90
- 91
- 91.5
- 92
- 97.0
- 98
- 100
- 100.3
- 101.0
- 101.3
- 101.4
- 101.5
- 101.6
- 101.7
- 102
- 102.2
- 102.5
- 103
- 104
- 105
- 109.0
- 113
- 114.3
- 117.0
- 123.0
- 125
- 125.9
- 126
- 126.5
- 127
- 127.3
- 127.5
- 128
- 130
- 131.4
- 145.0
- 150
- 151.4
- 151.7
- 152
- 152.4
- 152.5
- 152.6
- 155
- 165
- 175
- 176.5
- 176.6
- 177.8
- 180
- 200
- 202
- 203.2
- 203.6
- 203.7
- 204.1
- 205
- 208
- 227.0
- 228.6
- 230
- 250
- 252
- 252.1
- 253
- 253.0±2.0
- 253.5
- 254
- 257
- 278
- 282
- 300
- 302
- 303
- 303.5
- 307
- 357
- 359.0
- 400
- 408
- 410.0
- 500
- 512.0
-
D.E. D(mm)
- 21.2
- 24
- 28
- 30
- 31.4
- 32.0
- 32.4
- 37
- 38
- 38.6
- 39.2
- 39.5
- 39.8
- 40.0
- 41.5
- 42.0
- 42.6
- 42.9
- 44.5
- 44.5±1.0
- 45.0
- 45.4
- 45.8
- 45.9
- 46
- 46.2
- 46.8
- 53.8
- 54.3
- 54.5
- 55.0
- 55.3
- 56
- 56.4
- 56.6
- 57.5
- 57.6
- 57.9
- 58.0
- 58.5
- 59.0
- 59.8
- 59.8±1.5
- 59.9
- 60.2
- 61.0
- 61.2
- 61.8
- 69
- 69.5
- 70
- 70.3
- 70.5
- 71
- 71.2
- 71.5
- 71.6
- 71.8
- 72
- 72.6
- 73.0
- 73.2
- 73.2±1.5
- 74.7
- 79
- 79.5
- 80
- 80.3
- 80.5
- 81
- 81.5
- 81.8
- 82
- 82.4
- 82.5
- 83.8
- 84.5
- 84.6
- 85
- 85.2
- 85.8
- 85.9
- 86.4
- 86.8
- 87
- 87.2
- 87.6
- 94
- 94.5
- 95
- 95.5
- 96
- 96.8
- 97.4
- 97.7
- 98.2
- 98.6
- 99.0
- 99.3
- 99.5
- 100
- 100.3
- 101.4
- 105
- 105.3
- 105.5
- 106
- 107
- 107.3
- 107.4
- 108
- 109
- 110
- 110.5
- 110.8
- 111.4
- 111.5
- 112
- 112.2
- 113.0
- 114.6
- 118.0
- 119.3
- 125.3
- 125.9
- 129.5
- 130
- 130.3
- 130.5
- 131
- 131.5
- 132
- 133.7
- 134.5
- 135.0
- 137
- 137.2
- 137.3
- 137.5
- 137.6
- 137.7
- 138
- 138.2
- 138.5
- 138.7
- 139.3
- 139.7
- 140.2
- 155
- 155.5
- 155.7
- 157
- 158
- 159
- 160
- 162
- 163.8
- 164
- 164.8
- 165.5
- 166.0
- 166.2
- 167
- 168.8
- 177.8
- 180
- 180.7
- 182.8
- 187.8
- 190.6
- 191.0
- 192.4
- 205
- 205.7
- 208
- 211.0
- 211.5
- 215
- 216.0
- 216.5
- 216.8
- 217.1
- 217.2
- 217.5
- 220
- 223
- 230
- 240.4
- 243.1
- 255
- 255.9
- 256
- 259.5
- 261.0
- 263.9
- 263.9±2.5
- 265.7
- 266.2
- 268.5
- 271
- 274.2
- 280
- 292.6
- 305.9
- 306.5
- 307
- 308
- 309.6
- 311
- 316.0
- 316.4
- 318
- 320.0
- 322
- 328.2
- 332
- 357
- 378.5
- 407
- 418.0
- 431.0
- 458
- 520.0
- 532.0
-
Couleur
-
Fluide applicable
-
Pression admissible max. (inférieure à la température ambiante)(MPa)
Fabricant
Type de données CAO
-
- 2D
- 3D
Catégories relatives à « Flexibles »
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.