Générateurs de vide/éjecteurs à vide（Taille du raccord à simple pression du port de vide：Ø8）

?* À propos du délai d'expédition et des prix

• 

  ZK2, Unité de vide, Système de générateur de vide avec distributeur

  SMC

  A vacuum unit ejector system manufactured by SMC
  [Features]
  · Built-in digital pressure switch for vacuums, with energy-saving function. Cuts the air supply upon reaching vacuum: Leading to 90% reduction in air consumption
  · Has a 2-stage ejector structure that increases suction flow rate by 50% and reduces air consumption by 30% (compared to SMC's single-stage ejectors)
  · Compact and lightweight, with a 28% reduction in volume (88 cm³) and a 59% reduction in weight (81 g) compared to conventional products
  · Reduced wiring for single units as well as manifolding.
  · Once the supply valve is switched ON, the vacuum generation state is maintained even if the power is cut off. This reduces power consumption.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	194.00 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Générateur de vide avec capteur de pression série VQ

  NIHON PISCO

  *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  Combination type vacuum generator, optimal for controlling large flow rates.
  Pressure sensor specification (30‑mm wide, dual-output, NPN open collector output pressure sensor)

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	267.15 €
  Délai d'expédition minimum ：	12 jours

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, convoyage de granulés / poudre, modèle A, droit

  NIHON PISCO

  *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Transports small indefinite shaped working material such as granules, powder and fiber.
  · A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
  · Allows model selection by size and weight of working material.
  · Transports small indefinite shaped working material such as granules, powder and fiber.

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	56.69 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, convoyage de granulés / poudre, droit (modèle C)

  NIHON PISCO

  *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Transports small indefinite shaped working material such as granules, powder and fiber.
  · A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
  · Allows model selection by size and weight of working material.
  · Transports small indefinite shaped working material such as granules, powder and fiber.

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	61.44 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Modèle à élément simple, raccord union de convoyage de granulés / poudre, droit (modèle A)

  NIHON PISCO

  Transports small indefinite shaped working material such as granules, powder and fiber.
  
  [Features]
  · Transports small indefinite shaped working material such as granules, powder and fiber.
  · A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
  · Allows model selection by size and weight of working material.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	57.73 €
  	Prix spécial
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, raccord union de convoyage de granulés / poudre, droit (modèle B)

  NIHON PISCO

  *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Transports small indefinite shaped working material such as granules, powder and fiber.
  · A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
  · Allows model selection by size and weight of working material.
  · Transports small indefinite shaped working material such as granules, powder and fiber.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	62.46 €
  Délai d'expédition minimum ：	12 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Modèle à élément simple, modèle à montage direct, modèle coudé avec électrovanne, mise à l'air libre

  NIHON PISCO

  and provides a rich selection of differing shapes and capabilities. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.

  • Remise sur volume

  • Stock

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	22.27 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, modèle à montage direct, modèle coudé avec électrovanne, échappement central

  NIHON PISCO

  and provides a rich selection of differing shapes and capabilities. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	25.21 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Modèle à élément simple, modèle à montage direct, modèle droit avec électrovanne, mise à l'air libre

  NIHON PISCO

  and provides a rich selection of differing shapes and capabilities. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.
  · Provides a rich selection of types with differing capabilities and shapes.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	22.98 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Modèle à élément simple, modèle à montage direct, modèle droit avec électrovanne, échappement central

  NIHON PISCO

  and provides a rich selection of differing shapes and capabilities. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.
  · Provides a rich selection of types with differing capabilities and shapes.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	25.23 €
  	Prix spécial
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Unité de vide, Système de générateur de vide, Embase, ZZK2

  SMC

  · Ejector System (Manifold).
  · Easy maintenance.
  · Mounting variations.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	87.03 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

Loading...