Résultats de la recherche “GANTER_Discounts”

• • En promotion

  

  Stainless Steel-Levelling feet with mounting lug, with and without rubber underl

  GANTER

  Stainless Steel-Levelling feet GN 43 will be delivered mounted and are not removable.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Encadrement / support / piètement>
  • Profilés extrudés en aluminium, accessoires>
  • Pieds de réglage / ancrages

  Configurer maintenant
  à partir de∗ ：	7.70 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Levelling feet with mounting lug, steel sheet, zinc plated, with and without rub

  GANTER

  Levelling feet GN 42 will be delivered mounted and are not removable.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Encadrement / support / piètement>
  • Profilés extrudés en aluminium, accessoires>
  • Pieds de réglage / ancrages

  Configurer maintenant
  à partir de∗ ：	5.82 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Stainless Steel-Levelling feet, with and without rubber underlay

  GANTER

  Stainless Steel-Levelling feet GN 41 will be delivered mounted and are not removable.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Encadrement / support / piètement>
  • Profilés extrudés en aluminium, accessoires>
  • Pieds de réglage / ancrages

  Configurer maintenant
  à partir de∗ ：	6.30 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Levelling feet with threaded stud, Steel

  GANTER

  The static load of the levelling feet GN 343.2 is limited by the load capacity of the ball joint with threaded stud (tensile strength class 5.8 (500 N/mm2)).
  The static load values (only valid for Type OS / KS) in the above table refer to a net vertical load in relation to the levelling foot. Under normal operating conditions side loading or angular loading is not uncommon and the load capacity would be considerably reduced which must be taken into consideration.
  Levelling feet GN 343.2 cannot be disassembled.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Encadrement / support / piètement>
  • Profilés extrudés en aluminium, accessoires>
  • Pieds de réglage / ancrages

  Configurer maintenant
  à partir de∗ ：	6.42 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Leveling feet, foot / threaded stud Stainless Steel

  GANTER

  The static load of the levelling feet GN 343.6 is limited by the laod capacity of the Stainless Steel ball joint with threaded stud (AISI 303).
  The static load values in the above table refer to a net vertical load in relation to the ball socket. Under normal operating conditions side loadting or angular loading is not uncommon and the load capacity would be considerable reduced which must be taken into consideration.
  Levelling feet GN 343.6 cannot be disassembled.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Encadrement / support / piètement>
  • Profilés extrudés en aluminium, accessoires>
  • Pieds de réglage / ancrages

  Configurer maintenant
  à partir de∗ ：	13.54 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Spoked handwheels, Aluminium, Cast iron

  GANTER

  Handwheels DIN 950 in cast iron are supplied with handles made of zinc plated steel. In aluminum they are supplied with handles made of plastic (Type D) and made of zinc plated steel (Type F).
  The official standard sheet only provides for types A (without handle) and G (without handle, but with thread d4), also without the handwheel diameter d1 = 180.

  • Remise sur volume

  • Composants mécaniques>
  • Matériel pour portes, armoires>
  • Poignées de rotation, manivelles à main

  Configurer maintenant
  à partir de∗ ：	20.82 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Adjustable hand levers, Zinc die casting, with threaded stud steel

  GANTER

  Adjustable hand levers GN 300 are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
  Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Matériel pour portes, armoires>
  • Levier de serrage

  Configurer maintenant
  à partir de∗ ：	4.72 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Levelling feet, Steel

  GANTER

  Levelling feet GN 30 will be delivered mounted and are not removable.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Encadrement / support / piètement>
  • Profilés extrudés en aluminium, accessoires>
  • Pieds de réglage / ancrages

  Configurer maintenant
  à partir de∗ ：	10.50 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Adjustable hand levers, Zinc die casting, threaded stud Stainless Steel

  GANTER

  Adjustable hand levers GN 300.1 are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
  Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Matériel pour portes, armoires>
  • Levier de serrage

  Configurer maintenant
  à partir de∗ ：	7.46 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Adjustable Stainless Steel-Hand levers, threaded stud

  GANTER

  Adjustable hand levers GN 300.5 with full Stainless Steel-Handle, correspond to applications where "agressive" surrounding conditions are given, or where stainless steel materials are prescribed such as in food processing or chemical industry.
  Retaining screws with hexagon head (Type AS) comply with the requirement "prevents water from accumulating".
  Adjustable hand levers have proved to be ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
  Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Matériel pour portes, armoires>
  • Levier de serrage

  Configurer maintenant
  à partir de∗ ：	15.48 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Clamping levers with eccentrical cam, Lever zinc die casting

  GANTER

  Clamping levers with eccentrical cam GN 927.4 with Stainless Steel-threaded stud are used for rapid clamping and releasing. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
  The lever has been designed to ensure that its movement cannot exceed the max. clamping force.
  There are no loose components since they are all assembled and mounted in their correct order.
  Type A has the following benefits:
  The distance between the lever cam and the clamping surface is adjustable via a fine pitch thread, allowing the clamping position to be set easily with maximum clamping force. Also, the position of the lever relative to the clamping axis can be determined.
  With these clamping levers with eccentrical cam GN 927.4 , clamping forces of up to 8 kN can be reached.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Matériel pour portes, armoires>
  • Levier de serrage

  Configurer maintenant
  à partir de∗ ：	12.42 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Levelling feet with mounting lug

  GANTER

  Levelling feet GN 32 will be delivered mounted and are not removable.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Encadrement / support / piètement>
  • Profilés extrudés en aluminium, accessoires>
  • Pieds de réglage / ancrages

  Configurer maintenant
  à partir de∗ ：	10.76 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Levelling feet, steel sheet, zinc plated with and without rubber underlay

  GANTER

  Levelling feet GN 40 are easy and very reasonably priced foot design variants.
  Theywill be delivered mounted and are not removable.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Encadrement / support / piètement>
  • Profilés extrudés en aluminium, accessoires>
  • Pieds de réglage / ancrages

  Configurer maintenant
  à partir de∗ ：	4.68 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Safety handwheels, fixed fearing flange

  GANTER

  GN 327 safety handwheels feature the ultimate in health and safety at work standards because the handwheel, if disengaged, is mounted on a fixed component, the bearing flange. The wheel is fully disengaged from the rotating shaft.
  The bearing flange can also accept the bearing of the shaft via the bearing bushing (code No. 1). This bearing bushing is a dry bearing (DU bushing). Normally, the shaft has a separate bearing and the bearing bushing serves to center the bearing flange.
  Centering can also be effected by a centering ring (code No. 2) if the appropriate bore hole has been made at the machine side. In this case there is no need for the bearing bushes and no bearing friction (heating) will occur.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Matériel pour portes, armoires>
  • Poignées de rotation, manivelles à main

  Configurer maintenant
  à partir de∗ ：	335.76 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Stainless Steel-Levelling feet

  GANTER

  GN 31 Stainless Steel-Levelling feet with vulcanised rubber (Type B3, B4, C3 and C4) and screw version W feature fewer dead spots owing to their construction method and are also easier to clean.
  Stainless Steel-Levelling feet GN 31 will be delivered mounted and are not removable.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Encadrement / support / piètement>
  • Profilés extrudés en aluminium, accessoires>
  • Pieds de réglage / ancrages

  Configurer maintenant
  à partir de∗ ：	12.82 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Stainless Steel-Levelling feet with mounting lug

  GANTER

  Stainless Steel-Levelling feet GN 33 will be delivered mounted and are not removable.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Encadrement / support / piètement>
  • Profilés extrudés en aluminium, accessoires>
  • Pieds de réglage / ancrages

  Configurer maintenant
  à partir de∗ ：	14.38 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Torque limiting knob screws

  GANTER

  Torque limiting knob screws GN 3663 are used when the manually applied torque is to be limited.
  When turned clockwise, the torque mechanical system of the knurled knob triggers an „over-engagement“ as soon as the specified torque is reached. When turning anti-clockwise, the mechanical system locks such that the torque is not limited. When tightening, this will ensure that the maximum permissible torque is not exceeded. On the other hand, the torque necessary for releasing will always be transferred reliably.
  After removing the cover and loosening the countersunk screw, the thread or bore insert can be dismantled.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Matériel pour portes, armoires>
  • Boutons de serrage

  Configurer maintenant
  à partir de∗ ：	58.58 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Torque limiting knobs

  GANTER

  Torque limiting knobs GN 3663 are used when the manually applied torque is to be limited.
  When turned clockwise, the torque mechanical system of the knurled knob triggers an „over-engagement“ as soon as the specified torque is reached. When turning anti-clockwise, the mechanical system locks such that the torque is not limited. When tightening, this will ensure that the maximum permissible torque is not exceeded. On the other hand, the torque necessary for releasing will always be transferred reliably.
  After removing the cover and loosening the countersunk screw, the thread or bore insert can be dismantled.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Matériel pour portes, armoires>
  • Boutons de serrage

  Configurer maintenant
  à partir de∗ ：	58.48 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

Loading...