Résultats de la recherche “make to order”

• • En promotion jusqu’au 30/11/2024

  

  Edge protection seal profiles

  GANTER

  GN 2182 edge protection seal profiles can be used to seal doors, covers and hatches. The profiles are pressed by hand onto the front of metal sheets and plates. The embedded clamp insert prevents detachment. Glue or other adhesives are not required.
  When assembled, the profile should deform slightly according to w2. This ensures an optimal seal. Adherance to the guideline placement radii (r1...r4) is recommended in order to ensure a tight profile seal and to make assembly easier.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Produits de mesure/maintenance>
  • Matériel de protection / de garniture>
  • Garnitures

  Configurer maintenant
  à partir de∗ ：	160.58 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Plaque d'étanchéité, plaque d'étanchéité en résine JCP

  SHOWA CORPORATION

  [Features]
  • A cosmetic plate for use at a pipe pass-through opening.
  • Other dimensions such as small-diameter sizes for suspension bolts are available.
  • Please ask about custom color orders.
  • We can also make the product to your specified dimensions.
  • Standard product includes glue.
  • Please specify color with I, W, G at the end.

  • Remise sur volume

  • Composants mécaniques>
  • Pièces de tuyauterie>
  • Supports de tuyaux>
  • Supports pour tuyauterie traversant le plancher

  Configurer maintenant
  à partir de∗ ：	2.79 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Plaques usinées

  MISUMI

  Configurer maintenant
  Délai d'expédition minimum ：	-

• 

  Tube en spirale fendu

  CHIYODA TSUSHO

  A slitted spiral tube that makes it possible to replace electric wiring.
  
  [Features]
  · Slit machining.
  · Thanks to the slit on the tube, it is possible to perform wire replacement.
  · Wire protection.
  · Best suited for protecting electrical wires from scraping damage within cableveyors, etc., by placing wiring inside air tubes.
  · One-touch fittings can be used for air piping.
  · Special orders accepted

  • Composants mécaniques>
  • Équipement pneumatique>
  • Tuyaux / accessoires pour tuyaux

  Configurer maintenant
  à partir de∗ ：	48.43 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Mini tambour de bande polygonale【5 pièces par conditionnement】

  ICHIGUCHI

  • Remise sur volume

  • Fournitures industrielles>
  • Abrasifs pour meulage et polissage>
  • Roues avec arbres

  Configurer maintenant
  à partir de∗ ：	59.74 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Guides linéaires / chariot grand format / SBI-SL, SBI-SLL

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  Fichiers CAD 2D / 3D disponibles

  • Composants mécaniques>
  • Mouvement linéaire>
  • Guides linéaires>
  • Guides linéaires standard

  Configurer maintenant
  Délai d'expédition minimum ：	10 jours

• 

  Guides linéaires / chariot large, chariot extra large / SBI-FL, SBI-FLL

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  Fichiers CAD 2D / 3D disponibles

  • Composants mécaniques>
  • Mouvement linéaire>
  • Guides linéaires>
  • Guides linéaires standard

  Configurer maintenant
  Délai d'expédition minimum ：	10 jours

• 

  Guides linéaires / chariot long / SBI-CL, SBI-CLL

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  Fichiers CAD 2D / 3D disponibles

  • Composants mécaniques>
  • Mouvement linéaire>
  • Guides linéaires>
  • Guides linéaires standard

  Configurer maintenant
  Délai d'expédition minimum ：	10 jours

• 

  Guides linéaires / chariot long / SBI-HL, SBI-HLL

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  Fichiers CAD 2D / 3D disponibles

  • Composants mécaniques>
  • Mouvement linéaire>
  • Guides linéaires>
  • Guides linéaires standard

  Configurer maintenant
  Délai d'expédition minimum ：	10 jours

• 

  Guides linéaires / Petit chariot / SBI-SV

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  Fichiers CAD 2D / 3D disponibles

  • Composants mécaniques>
  • Mouvement linéaire>
  • Guides linéaires>
  • Guides linéaires standard

  Configurer maintenant
  Délai d'expédition minimum ：	10 jours

• 

  Guides linéaires / chariot large, court / SBI-FV

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  Fichiers CAD 2D / 3D disponibles

  • Composants mécaniques>
  • Mouvement linéaire>
  • Guides linéaires>
  • Guides linéaires standard

  Configurer maintenant
  Délai d'expédition minimum ：	10 jours

• • En promotion jusqu’au 30/11/2024

  

  Edge protection profiles

  GANTER

  GN 2184 edge protection profiles are installed on the front edge of metal sheets and plates. They protect the surfaces from damage by sharp edges. The edge finish additionally achieves an optical decorative effect, while the need for potential further treatment such as burring and chamfering of cut or laser-cut metal sheets is reduced to an absolute minimum.
  Adhering to the guideline placement radii (r1...r3) is recommended in order to guarantee permanent profile placement and to make assembly easier. Assembly can be carried out by hand, or alternatively with a soft-face hammer. The embedded clamp insert prevents it from detaching. Glue or other adhesive is not required.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Produits de mesure/maintenance>
  • Matériel de protection / de garniture>
  • Garnitures

  Configurer maintenant
  à partir de∗ ：	86.52 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Polycarbonate screw【10 pièces par conditionnement】

  MISUMI

  • Remise sur volume

  • Câbles et Connecteurs>
  • Vis/entretoises>
  • Vis/entretoises

  Configurer maintenant
  à partir de∗ ：	1.90 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  ZP2-*H / K / U, Ventouse sans trace

  SMC

  [Features]
  · Avoids leaving any suction marks (rubber components) on the workpiece.
  · Prevents the pad (rubber) and the workpiece from sticking together.
  · Compatible with ZP series bellows pads (ø6 to ø32).

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Composants pour systèmes de vide>
  • Ventouses / composants d'aspiration>
  • Ventouses

  Configurer maintenant
  à partir de∗ ：	6.27 €
  Délai d'expédition minimum ：	22 jours

  *Prix unitaire/configuration de base

• 

  Mini bande polygonale

  ICHIGUCHI

  • Remise sur volume

  • Fournitures industrielles>
  • Abrasifs pour meulage et polissage>
  • Roues avec arbres

  Configurer maintenant
  à partir de∗ ：	5.62 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion jusqu’au 30/11/2024

  

  Tube à spirales en polyuréthane gamme TCU

  SMC

  Flexible tubing that can be used for compact piping.
  [Features]
  · Flexible.
  · Makes compact piping possible.
  · Fluid: air.
  · Maximum operating pressure: 0.8 MPa or less (at 20°C).
  [Applications]
  · For piping in movable parts.

  • Composants mécaniques>
  • Équipement pneumatique>
  • Tuyaux / accessoires pour tuyaux

  Configurer maintenant
  à partir de∗ ：	10.63 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  AC20D-40D-A (FRL), Nouveau modèle modulaire, filtre régulateur + filtre micronique

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle.
  · Weight reduction: reduced by up to 90 g
  · Without corrosion. The use of a resin body ensures there is no rusting.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Équipement pneumatique>
  • Filtres/régulateurs/lubrificateurs>
  • Unités FRL

  Configurer maintenant
  à partir de∗ ：	61.53 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Edge protection seal profiles

  GANTER

  GN 2180 edge protection seal profiles can be used to seal doors, covers and hatches. The profiles are pressed by hand onto the front of metal sheets and plates. The embedded clamp insert prevents detachment. Glue or other adhesives are not required.
  When assembled, the profile should deform slightly according to w2. This ensures an optimal seal. Adherance to the guideline placement radii (r1... r4) is recommended in order to ensure a tight profile seal and to make assembly easier.
  The NBR profiles are recommended for use in cases where contact with fuels, oils or coolants can occur.
  EPDM profiles are certified according to UL 50 and UL 94-HB and are therefore approved for the US-American and the Canadian market.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Produits de mesure/maintenance>
  • Matériel de protection / de garniture>
  • Garnitures

  Configurer maintenant
  à partir de∗ ：	150.92 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Rails de guidage / forme C / dimensions des rails au choix / GN 2422

  GANTER

  Cam roller linear guide rails GN 2422 can be combined with cam roller carriages GN 2424 or cam rollers GN 2426 to construct linear guide rail systems. These space-saving units are used, for example, for carrying sliding doors, or in mechanical engineering or jigmaking for the linear movement of plant equipment.
  These systems feature high stability and quiet running at high traversal speeds. Thanks to the option of combining fixed and floating bearing rails, they cause no great stress to the surrounding construction, and thus allow parallelism errors to be compensated for. Flat head screws with low head are included with the rail types UT and XT.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Mouvement linéaire>
  • Guides linéaires>
  • Guides linéaires standard

  Configurer maintenant
  à partir de∗ ：	53.20 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Connecteur circuit imprimé à câble intégré avec pas de 2mm, série DF4

  HIROSE ELECTRONIC

  Connector for direct board-to-cable connection with 2-mm pitch. By directly attaching the terminal insertion socket into the circuit board, the header cost can be minimized.
  
  [Features]
  ・Minimizes header cost: using a dual insertion-removal socket and directly attached connector terminal harness, both circuit boards can have their separate functions used as-is, reducing the required number of headers for a dual terminal socket harness from 2 to 1.
  ・Small type/multi-pin: a wide range of small types with a number of pins.
  ・Circuit board mounting height: 4.3 mm (1 crimp attachment array), maximum pin number: 32 (2 crimp attachment arrays).
  ・Temporary circuit board fastening mechanism: Connector can be temporarily affixed to the circuit board in order to make insertion easier.

  • Remise sur volume

  • Câbles et Connecteurs>
  • Connecteurs (usage général)>
  • Connecteurs carrés

  Configurer maintenant
  à partir de∗ ：	0.04 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Inserts de déflexion / laiton

  MISUMI

  Fichiers CAD 3D disponibles

  • Composants pour la fabrication de moules>
  • Cooling or Heating Components>
  • Inside of Mold Cooling Components>
  • Baffle Boards

  Configurer maintenant
  Délai d'expédition minimum ：	Devis

• • En promotion jusqu’au 30/11/2024

  

  Visseuse électrique D-331 / D-332

  HOZAN

  An electric screwdriver equipped with a cushioned handle that is highly effective for slip prevention.
  [Features]
  · Elastomer resin is used for slip prevention of the handle component.
  · Tightly fits on to the handle body and exhibits excellent gripping performance.
  · Has a handle shape that makes pressing the screwdriver against screws easy so that force can be transferred well.
  · The tip has been magnetically processed to hold screws and the handle is made of polypropylene resin and is lightweight.
  · A design without plating in order to avoid changes in tip precision.
  [Applications]
  · Ideal for screw tightening work in deep and narrow spaces.
  · Electric type screwdriver that can be easily pushed and turned, recommended for the Licensed Electrician Proficiency Test.

  • Remise sur volume

  • Fournitures industrielles>
  • Outils manuels>
  • Tournevis

  Configurer maintenant
  à partir de∗ ：	10.86 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Inserts de cavité pour l'évacuation des gaz

  MISUMI

  Fichiers CAD 3D disponibles

  • Composants pour la fabrication de moules>
  • Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent>
  • Cavity Inserts for Gas Release

  Configurer maintenant
  Délai d'expédition minimum ：	12 jours

• 

  MY1H-Z, Vérin sans tige à entraînement direct, Type de guide linéaire sans bloc butée

  SMC

  With the MY1H-Z series, piping is possible from the 4 directions of the head cover.
  [Features]
  · Piping on site is adjustable depending on the state of the installation.
  · Adjusting the cushion needle is easy.

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Équipement pneumatique>
  • Vérins / actionneurs rotatifs / pinces pneumatiques>
  • Vérins pneumatiques à glissière

  Configurer maintenant
  à partir de∗ ：	17.21 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  AC10B-40B-A (FRL), Nouveau modèle modulaire, filtre à air + régulateur

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle.
  · Weight reduction: reduced by up to 90 g
  · Without corrosion. The use of a resin body ensures there is no rusting.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Équipement pneumatique>
  • Filtres/régulateurs/lubrificateurs>
  • Unités FRL

  Configurer maintenant
  à partir de∗ ：	36.69 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  VQZ*2*, Série 1000 / 2000 / 3000, Electrodistributeur 5 / 2, 5 / 3, joint élastique, montage en ligne

  SMC

  SMC Solenoid Valve.
  [Features]
  · Can be DIN rail mounted
  · IP65-compliant protective structure (DIN terminal type, common exhaust).
  · Choice of metal or rubber seal available for the main valve construction.
  · Built-in one-touch fitting makes piping work easy

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Équipement pneumatique>
  • Électrovannes pneumatiques>
  • Électrovannes pneumatiques

  Configurer maintenant
  à partir de∗ ：	53.27 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Lifting eye bolts (rotating), Stainless Steel

  GANTER

  Stainless Steel-Lifting eye bolts GN 581.5 are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as potentially possible in Stainless Steel-Lifting eye bolts DIN 580).
  Stainless Steel-Lifting eye bolts GN 581.5 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).
  The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite.
  Stainless Steel-Lifting eye bolts GN 581.5 eye bolts comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.
  The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.
  The hexagon socket bolt cannot be removed from the ring.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  • Vis, boulons, rondelles, écrous>
  • Vis/boulons>
  • Boulons à œil / vis à œil>
  • Boulons à œil

  Configurer maintenant
  à partir de∗ ：	182.42 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• • En promotion jusqu’au 30/11/2024

  

  MK-Z Brides pivotantes, Standard avec rainure de fixation du détecteur

  SMC

  Rotary Clamp Cylinder, Standard Type MK Series with 3 times the allowable moment of inertia.
  [Features]
  · Auto switches can be mounted on any of the 4 surfaces to suit the installation conditions.
  · Designed so that the auto switches do not project out.
  · 2-color indicator solid state auto switch.
  · Expanded standard stroke range.
  · Overall length is shortened.
  · Strong magnetic field resistant auto switch can be used.
  · 2 types of clamping rotary direction available.

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Équipement pneumatique>
  • Vérins / actionneurs rotatifs / pinces pneumatiques>
  • Vérins à bride

  Configurer maintenant
  à partir de∗ ：	99.11 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion jusqu’au 30/11/2024

  

  Indexing plungers for precision locating

  GANTER

  Indexing plungers GN 817.3 realize a reasonable priced precision locating when guide bushes DIN 179 are used.
  For this purpose a guide bush DIN 179 is used as guide, whereby the dimension l3 of the plunger determines the length of the bush.
  The precise location is, therefore, not dependent on the guide pin in the plunger, but on the accuracy of the guide bush (bore tolerance F7) and the plunger (tolerance h7). Both components are hardened and ground. It goes without saying that the bush length also influences the accuracy of the positioning.
  Type C is used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Positionnement, gabarits et fixations>
  • Plongeurs, doigts diviseurs>
  • Doigts diviseurs

  Configurer maintenant
  à partir de∗ ：	27.02 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteur circuit imprimé à câble (pas de 1.25mm, double rangée, profil bas) - série DF14【1-100 pièces par conditionnement】

  HIROSE ELECTRONIC

  Connector for board-to-cable connection with 1.25-mm pitch. A low-profile type with a lower circuit board mounting height.
  
  [Features]
  · Thin type.
  · A dedicated right-angle connector to achieve a low-profile on top of circuit boards.
  · Circuit board mounting height: 2.5 mm.
  · This makes it possible to draw signals from places where there is no space between the circuit boards.
  · In addition, the profile of the offset type is lower than the board mounting height of 1.6 mm.
  · Supports automatic mounting.
  · The header has a vacuum absorption surface. Therefore, automatic mounting by embossed packing is possible.
  · Additionally, magazine packing is also available for the on-board type.
  · Four-walled type prevents socket from scraping the circuit board.
  · Header includes a box structure to prevent twisting to ensure incorrect insertion is completely prevented. Circuit board also includes walls to prevent damage caused by scraping when performing insertion and removal from the socket.
  · Additionally, a reinforcement bracket is included to prevent solder from peeling.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Remise sur volume

  • Câbles et Connecteurs>
  • Connecteurs (usage général)>
  • Connecteurs carrés

  Configurer maintenant
  à partir de∗ ：	0.65 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

Loading...