TiAlN Coated Carbide Stepped Drill, For Bolt Drilling / For Drilling Pilot Holes for Screws, with Chamfering Blade
Cliquez sur cette image pour l'agrandir.
Cliquez sur cette image pour l'agrandir.
- Remise sur volume
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Hole diameter (drill diameter) D (mm) | Groove Length L (mm) | Overall Length L (mm) | Step Length ℓ (mm) | Shank Diameter d | Diameter Tolerance | Tolerance of Shank Diameter | Use | Major Diameter D1 (φ) | Applicable Screw Size | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
90.07 € | 1 | Disponible | 5 jours | 3.4 | 21 | 73 | 8 | 6 | 0 ~ -0.014 | 0 ~ -0.008 | - | 6 | M4 | |
90.07 € | 1 | Disponible | 5 jours | 3.4 | 25 | 77 | 12 | 6 | 0 ~ -0.014 | 0 ~ -0.008 | - | 6 | M4 | |
97.21 € | 1 | Disponible | 5 jours | 4.3 | 26 | 79 | 10 | 7 | 0 ~ -0.014 | 0 ~ -0.009 | - | 7 | M5 | |
97.21 € | 1 | Disponible | 5 jours | 4.3 | 31 | 84 | 15 | 7 | 0 ~ -0.014 | 0 ~ -0.009 | - | 7 | M5 | |
110.88 € | 1 | Disponible | 5 jours | 5.1 | 30 | 84 | 12 | 8 | 0 ~ -0.014 | 0 ~ -0.009 | - | 8 | M6 | |
110.88 € | 1 | Disponible | 5 jours | 5.1 | 36 | 90 | 18 | 8 | 0 ~ -0.014 | 0 ~ -0.009 | - | 8 | M6 | |
130.21 € | 1 | Disponible | 5 jours | 6.8 | 40 | 96 | 16 | 10 | 0 ~ -0.018 | 0 ~ -0.009 | - | 10 | M8 | |
130.21 € | 1 | Disponible | 5 jours | 6.8 | 48 | 104 | 24 | 10 | 0 ~ -0.018 | 0 ~ -0.009 | - | 10 | M8 | |
94.01 € | 1 | Disponible | 5 jours | 8.5 | 50 | 112 | 20 | 12 | 0 ~ -0.018 | 0 ~ -0.011 | - | 12 | M10 | |
109.82 € | 1 | Disponible | 5 jours | 8.5 | 60 | 122 | 30 | 12 | 0 ~ -0.018 | 0 ~ -0.011 | - | 12 | M10 | |
107.98 € | 1 | Disponible | 5 jours | 10.3 | 60 | 124 | 24 | 14 | 0 ~ -0.022 | 0 ~ -0.011 | - | 14 | M12 | |
146.90 € | 1 | Disponible | 5 jours | 10.3 | 72 | 136 | 36 | 14 | 0 ~ -0.022 | 0 ~ -0.011 | - | 14 | M12 | |
85.47 € | 1 | Disponible | 5 jours | 3.4 | 21 | 73 | 8 | 6 | 0 ~ -0.014 | 0 ~ -0.008 | Cutting | 6 | - | |
95.93 € | 1 | Disponible | 5 jours | 3.4 | 21 | 75 | 10 | 6.5 | 0 ~ -0.014 | 0 ~ -0.009 | For Spot Facing | 6.5 | - | |
85.47 € | 1 | Disponible | 5 jours | 3.4 | 25 | 77 | 12 | 6 | 0 ~ -0.014 | 0 ~ -0.009 | Cutting | 6 | - | |
115.80 € | 1 | Disponible | 5 jours | 3.4 | 25 | 80 | 15 | 6.5 | 0 ~ -0.014 | 0 ~ -0.009 | For Spot Facing | 6.5 | - | |
84.87 € | 1 | Disponible | 5 jours | 4.3 | 26 | 79 | 10 | 7 | 0 ~ -0.014 | 0 ~ -0.009 | Cutting | 7 | - | |
111.45 € | 1 | Disponible | 5 jours | 4.5 | 25 | 74 | 12 | 8 | 0 ~ -0.014 | 0 ~ -0.009 | For Spot Facing | 8 | - | |
143.25 € | 1 | Disponible | 5 jours | 4.5 | 35 | 84 | 22 | 8 | 0 ~ -0.014 | 0 ~ -0.009 | For Spot Facing | 8 | - | |
110.88 € | 1 | Disponible | 5 jours | 5.1 | 30 | 84 | 12 | 8 | 0 ~ -0.014 | 0 ~ -0.009 | Cutting | 8 | - | |
110.88 € | 1 | Disponible | 15 jours | 5.1 | 36 | 90 | 18 | 8 | 0 ~ -0.014 | 0 ~ -0.009 | Cutting | 8 | - | |
128.10 € | 1 | Disponible | 5 jours | 5.5 | 29 | 79 | 17 | 9.5 | 0 ~ -0.014 | 0 ~ -0.009 | For Spot Facing | 9.5 | - | |
170.53 € | 1 | Disponible | 5 jours | 5.5 | 40 | 90 | 28 | 9.5 | 0 ~ -0.014 | 0 ~ -0.009 | For Spot Facing | 9.5 | - | |
209.17 € | 1 | Disponible | 5 jours | 6.6 | 32 | 91 | 20 | 11 | 0 ~ -0.018 | 0 ~ -0.011 | For Spot Facing | 11 | - | |
233.72 € | 1 | Disponible | 5 jours | 6.6 | 45 | 104 | 33 | 11 | 0 ~ -0.018 | 0 ~ -0.011 | For Spot Facing | 11 | - | |
130.21 € | 1 | Disponible | 5 jours | 6.8 | 40 | 96 | 16 | 10 | 0 ~ -0.018 | 0 ~ -0.009 | Cutting | 10 | - | |
109.82 € | 1 | Disponible | 5 jours | 8.5 | 60 | 122 | 30 | 12 | 0 ~ -0.018 | 0 ~ -0.011 | Cutting | 12 | - | |
190.12 € | 1 | Disponible | 5 jours | 9 | 47 | 108 | 28 | 14 | 0 ~ -0.018 | 0 ~ -0.011 | For Spot Facing | 14 | - | |
218.55 € | 1 | Disponible | 5 jours | 9 | 65 | 122 | 42 | 14 | 0 ~ -0.018 | 0 ~ -0.011 | For Spot Facing | 14 | - | |
146.90 € | 1 | Disponible | 5 jours | 10.3 | 72 | 136 | 36 | 14 | 0 ~ -0.022 | 0 ~ -0.011 | Cutting | 14 | - |
Loading...
Spécifications
Model Number
TAC-SF-SDR (For bolt hole drilling)
| Step Length ℓ | Large Diameter D1 | Groove Length ℓ1 | Overall Length L | Shank Diameter d | ||
| Tip Diameter D | ||||||
| Counterbore Type | 3.4 | 10 | 6.5 | 21 | 75 | 6.5 |
| 15 | 6.5 | 25 | 80 | 6.5 | ||
| 4.5 | 12 | 8 | 25 | 74 | 8 | |
| 22 | 8 | 35 | 84 | 8 | ||
| 5.5 | 17 | 9.5 | 29 | 79 | 9.5 | |
| 28 | 9.5 | 40 | 90 | 9.5 | ||
| 6.6 | 20 | 11 | 32 | 91 | 11 | |
| 33 | 11 | 45 | 104 | 11 | ||
| 9 | 28 | 14 | 47 | 108 | 14 | |
| 42 | 14 | 65 | 122 | 14 | ||
| Cutting Type | 3.4 | 8 | 6 | 21 | 73 | 6 |
| 12 | 6 | 25 | 77 | 6 | ||
| 4.3 | 10 | 7 | 26 | 79 | 7 | |
| 5.1 | 12 | 8 | 30 | 84 | 8 | |
| 18 | 8 | 36 | 90 | 8 | ||
| 6.8 | 16 | 10 | 40 | 96 | 10 | |
| 8.5 | 20 | 12 | 50 | 112 | 12 | |
| 30 | 12 | 60 | 122 | 12 | ||
| 10.3 | 36 | 14 | 72 | 136 | 14 |
| Tip Diameter D | Tolerance (h8) |
| 3.4 ~ 5.5 | 0 -0.014 |
| 6.6 ~ 9 | 0 -0.018 |
| 10.3 | 0 -0.022 |
| Shank Diameter d | Tolerance (h6) |
| 6 | 0 -0.008 |
| 6.5 ~ 10 | 0 -0.009 |
| 11~ 14 | 0 -0.011 |
Model Number
TAC-SC-SDR (For screw tap hole drilling)
| Tip Diameter D | Step Length ℓ | Large Diameter D1 | Groove Length ℓ1 | Overall Length L | Shank Diameter d | Applicable Screw Size |
| 3.4 | 8 | 6 | 21 | 73 | 6 | M4 |
| 12 | 6 | 25 | 77 | 6 | M4 | |
| 4.3 | 10 | 7 | 26 | 79 | 7 | M5 |
| 15 | 7 | 31 | 84 | 7 | M5 | |
| 5.1 | 12 | 8 | 30 | 84 | 8 | M6 |
| 18 | 8 | 36 | 90 | 8 | M6 | |
| 6.8 | 16 | 10 | 40 | 96 | 10 | M8 |
| 24 | 10 | 48 | 104 | 10 | M8 | |
| 8.5 | 20 | 12 | 50 | 112 | 12 | M10 |
| 30 | 12 | 60 | 122 | 12 | M10 | |
| 10.3 | 24 | 14 | 60 | 124 | 14 | M12 |
| 36 | 14 | 72 | 136 | 14 | M12 |
| Tip Diameter D | Tolerance (h8) |
| 3.4 ~ 5.1 | 0 -0.014 |
| 6.8 / 8.5 | 0 -0.018 |
| 10.3 | 0 -0.022 |
| Shank Diameter d | Tolerance (h6) |
| 6 | 0 -0.008 |
| 7 ~ 10 | 0 -0.009 |
| 12 / 14 | 0 -0.011 |
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
● Boring and counterboring processes when drilling bolt holes can be done in a single step to realize a high-efficiency process. (Counterbore Model)
● When drilling pilot tap holes, a relief hole can be drilled at the same time, which is ideal for drilling pilot holes in thick sheet metal to provide scrap clearance. (Cutting Model)
● Designed for very frequent drilling of pilot holes for M4 – M12 metric coarse thread.
● High-efficiency hole drilling is achieved by reducing the chamfering process.
Informations de base
| work material | General Steel / Heat-Treated Steel / Acier inoxydable / Fonte / Aluminium / Cuivre | Tool Material Type | Carbure | Shank Type | Straight Shank |
|---|---|---|---|---|---|
| Coating Y/N | Included | Coating Type | TiAlN | With/without Oil Hole | None |
| Point Angle(°) | 140 | Thinning | Included |
Configurer
Propriétés de base
-
Hole diameter (drill diameter) D(mm)
-
Groove Length L(mm)
-
Overall Length L(mm)
-
Step Length ℓ(mm)
-
Type
- TAC-SC-SDR
- TAC-SF-SDR
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
- 15 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.