Sortie supérieure, T-1, à vis
Designed for dissimilar metal joints, so it cannot be used for stainless steel pipes.
[Features]
· Wide selection of products for surface treatments.
· Prevents bolt from dropping out during construction work, allowing safe and quick operation.
· Due to recent environmental degradation affecting water supply, a high concentration of chlorine has been used for sterilization, significantly affecting pipes.
· As a result, we have developed and adopted a gasket with heat resistant and chlorine resistant properties.
· Because we offer a wide range of stainless steel SUS Top Systems, joining of mid to large diameter stainless steel piping is made easy via combinations of top joint epoxy-coated products and Nylon-coated products.
· Pipe treatment and joining are simpler and faster than when threaded fittings or weld joining is used.
· Structurally strong and flexible against pipe sagging and stretching (able to support loop piping, etc.).
· Fitting suppresses elastic flexibility, supporting the R-5 and R-11, by providing unevenness on the mating surface of the housing.
[Features]
· Wide selection of products for surface treatments.
· Prevents bolt from dropping out during construction work, allowing safe and quick operation.
· Due to recent environmental degradation affecting water supply, a high concentration of chlorine has been used for sterilization, significantly affecting pipes.
· As a result, we have developed and adopted a gasket with heat resistant and chlorine resistant properties.
· Because we offer a wide range of stainless steel SUS Top Systems, joining of mid to large diameter stainless steel piping is made easy via combinations of top joint epoxy-coated products and Nylon-coated products.
· Pipe treatment and joining are simpler and faster than when threaded fittings or weld joining is used.
· Structurally strong and flexible against pipe sagging and stretching (able to support loop piping, etc.).
· Fitting suppresses elastic flexibility, supporting the R-5 and R-11, by providing unevenness on the mating surface of the housing.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
- Données produit
- Données CAO non disponibles
Référence pièce
|
|---|
| TOPJ-T-1-5X2B-R |
| TOPJ-T-1-5X2B-W |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Nominal | Valeur nominale, seconde extrémité | Peinture de surface | |
|---|---|---|---|---|---|---|---|
54.09 € | 1 | 8 jours | 5B (125A) | 2B (50A) | Revêtement antirouille primaire (se terminant avec R) | ||
59.49 € | 1 | 12 jours | 5B (125A) | 2B (50A) | Zingage à chaud (se terminant avec W) |
Loading...
Informations de base
| Type | Pièce de raccordement (branchement et à vis) | Tuyau applicable | Tuyau en acier | Fluides utilisables | Eau |
|---|---|---|---|---|---|
| Pression de service minimum(MPa) | 2 | Matériau du joint statique | EPDM | Matériau du corps principal | Fonte |
| Type de boulon de serrage | Écrou de boulon |
Configurer
Propriétés de base
-
Valeur nominale, seconde extrémité
-
Peinture de surface
- Revêtement antirouille primaire (se terminant avec R)
- Zingage à chaud (se terminant avec W)
-
Type
- TOPJ-T-1
-
Nominal
Filtrer par jours d'expédition standard
-
- Tous les articles
- 7 jours ou moins
- 8 jours ou moins
- 12 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.