Filtre à gaz propre, filtre à cartouche, série SFA100/200/300
[Features]
· Precision filtration of compressed air, nitrogen.
· Cleaning, assembly, inspection and even antistatic sealed double packaging of all parts can be consistently carried out in a clean environment.
· PTFE membrane element in a cartridge form (filtration: 0.01 μm [filtration efficiency 99.99%]).
· Replaceable elements.
· Cartridge type / disc style.
· Connection port diameter: 1/4.
· Connection method: Rc/NPT/TSJ/UOJ.
(i)Remarque
- ■ SMC Product Line
Webpages for products currently without individual pages on this site will be released on an ad-hoc basis.
Click here for a quotation or to make an order if you have a model number.
■ Products Planned for Online Release
Air cylinder-related product pages will be released on this site on an ad-hoc basis.
CQ2, MG types, etc., are already available. Click here to check.
*Vacuum equipment, FRLs, solenoid valves, etc., will also be released on dedicated pages on this site on an ad-hoc basis.
*The information above is correct as of December 2018. - See catalog for specification details.
- Product images may be representative images. Refer to the catalog for details.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Clean Gas Filter: Cartridge Type / Disc Type, SFA100/SFA200/SFA300 Series Specifications
SFA103 external appearance
SFA200 external appearance
SFA302 external appearance
| Applicable Fluid | Air, nitrogen | |
|---|---|---|
| Operating Pressure*1 | MAX. 0.99 MPa, Vacuum 1.3 ×; 10-6 kPa | |
| Operating Temperature | 5 to 80℃ | |
| Element Proof Differential Pressure | MAX. 0.1 MPa | |
| Element Reverse Differential Pressure | MAX. 0.05 MPa | |
| Filtration*2 | 0.01 μm (filtration efficiency 99.99%) | |
| Main Material | Case | SUS316 (Interior/Exterior: Electrolytic polishing) |
| Filtration Medium | PTFE membrane | |
| Seal | Fluoroelastomer (FKM) | |
| Packaging | Antistatic sealed double package | |
*1: The maximum operating pressure is 0.99 MPa since this product does not conform to the High Pressure Gas Safety Law (Japan). Ensure that, if 0.1 MPa is exceeded, there is no pressure fluctuation during use.
*2: Measured under manufacturer's specified conditions.
Model
| Model | Rated Flow L/min (ANR)*1 | Connection | Filtration Area cm2 | Element Part No.*2 | Weight (kg) |
|---|---|---|---|---|---|
| SFA100-02 | 26 | Rc 1/4 (female thread) | 13.85 | ED001S-X10V | 0.34 |
| SFA101-02 | NPT 1/4 (female thread) | ||||
| SFA200-02 | 70 | Rc 1/4 (female thread) | 33.18 | ED101S-X10V | 0.44 |
| SFA201-02 | NPT 1/4 (female thread) | ||||
| SFA300-02 | 140 | Rc 1/4 (female thread) | 56.75 | ED201S-X10V | 0.66 |
| SFA301-02 | NPT 1/4 (female thread) | ||||
| SFA102-02 | 26 | TSJ 1/4 Tube, Swage Joint | 13.85 | ED001S-X10V | 0.38 |
| SFA202-02 | 70 | 33.18 | ED101S-X10V | 0.49 | |
| SFA302-02 | 140 | 56.75 | ED201S-X10V | 0.70 | |
| SFA103-02 | 26 | UOJ1/4 Union O-Ring, Joint | 13.85 | ED001S-X10V | 0.42 |
| SFA203-02 | 70 | 33.18 | ED101S-X10V | 0.53 | |
| SFA303-02 | 140 | 56.75 | ED201S-X10V | 0.75 |
*1: At inlet pressure of 0.7 MPa and pressure drop of 0.02 MPa.
*2: Contents of diagram numbers (3) to (7) are included in the element part no. (refer to diagrams).
Product Diagram
Cartridge Type / Disc Type, SFA100/SFA200/SFA300 Series diagram
| Number | Part name | Material | Note |
|---|---|---|---|
| 1 | Case | SUS 316 | Electrolytic polishing (interior/exterior) |
| 2 | V Clamp | SUS304 | - |
| 3 | Holder 1 | Polyester | Element |
| 4 | Holder 2 | ||
| 5 | Filtration Medium | PTFE | |
| 6 | Packing | FKM | |
| 7 | V packing |
Product Outline Dimensional Drawing
SFA100-02/SFA101-02/SFA200-02/SFA201-02/SFA300-02/SFA301-02 dimensional drawings
(Unit: mm)
| Model | Connection | (A) | (øB) |
|---|---|---|---|
| SFA100-02 | Rc 1/4 | 46 | 76 |
| SFA101-02 | NPT 1/4 | ||
| SFA200-02 | Rc 1/4 | 51 | 96 |
| SFA201-02 | NPT 1/4 | ||
| SFA300-02 | Rc 1/4 | 59 | 120 |
| SFA301-02 | NPT 1/4 |
(): Reference dimensions
SFA102-02/SFA202-02/SFA302-02 dimensional drawings
(Unit: mm)
| Model | Connection | (A) | (øB) |
|---|---|---|---|
| SFA102-02 | TSJ 1/4 (Tube Swage Joint) | 89 | 76 |
| SFA202-02 | 93 | 96 | |
| SFA302-02 | 101 | 120 |
(): Reference dimensions
(Unit: mm)
SFA103-02/SFA203-02/SFA303-02 dimensional drawing
(Unit: mm)
| Model | Connection | (A) | (øB) |
|---|---|---|---|
| SFA103-02 | UOJ 1/4 (Union O-Ring Joint) | 117 | 76 |
| SFA203-02 | 122 | 96 | |
| SFA303-02 | 130 | 120 |
(): Reference dimensions
Product Flow Rate Characteristics (Fluid: Compressed Air / Inlet Temperature: 20°C)
SFA10□ flow rate characteristics
SFA20□ flow rate characteristics
SFA30□ flow rate characteristics
Precautions
- *Ensure that you read the specific product precautions prior to use.
- *Confirm the specifications. The Clean Gas Filter is designed for use with compressed air and nitrogen gas only. Do not use with fluids (gases) other than those stated in the specifications, and do not exceed the specified ranges for pressure or temperature, as this will cause damage, etc.
- *Select a product according to the maximum consumption flow rate. When using compressed air for air blow applications, etc., calculate the maximum volume of air that will be consumed before selecting the SF□ series product size. (Using a product that exceeds the maximum air flow and running excessive compressed air can cause the cleanliness of the compressed air to deteriorate and/or damage the element.)
- *Set the processing flow rate with an initial pressure drop of 0.02 MPa or less. If the initial pressure drop is set too high, the service life will be shorter due to clogging.
- *See the manufacturer's catalog for product information other than the above.
- *Product pictures are example representations for the product series. Please be aware that actual product specifications may be different.
Référence pièce
|
|---|
| SFA100-02 |
| SFA101-02 |
| SFA102-02 |
| SFA103-02 |
| SFA200-02 |
| SFA201-02 |
| SFA202-02 |
| SFA203-02 |
| SFA300-02 |
| SFA301-02 |
| SFA302-02 |
| SFA303-02 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Type | Qualité de l'air comprimé | Niveau de filtration | Débit d'air servant au traitement (l/min) | Type de connexion | Filetage nominal de tuyauterie | Environnement de fonctionnement | Robinet de purge | Matériau de la cuve | Protection de cuve | Plage de pression de fonctionnement (MPa) | Compatible Models | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
282.69 € | 1 | 4 jours | Standard | General Dry Air | 0.01μm | 26 | [Tuyauterie à simple pression] Tuyau à simple effet | 1/4 | Clean Room Specifications (Prevent dust) | NA | [Métal] Alliage d'aluminium | NA | nul～0.99 | - | ||
282.69 € | 1 | 26 jours | Standard | General Dry Air | 0.01μm | 26 | [NPT] NPT femelle | 1/4 | Clean Room Specifications (Prevent dust) | NA | [Métal] Alliage d'aluminium | NA | nul～0.99 | - | ||
376.90 € | 1 | 26 jours | Standard | General Dry Air | 0.01μm | 26 | TSJ | 1/4 | Clean Room Specifications (Prevent dust) | NA | [Métal] Alliage d'aluminium | NA | nul～0.99 | - | ||
376.60 € | 1 | 26 jours | Standard | General Dry Air | 0.01μm | 26 | UOJ | 1/4 | Clean Room Specifications (Prevent dust) | NA | [Métal] Alliage d'aluminium | NA | nul～0.99 | - | ||
314.10 € | 1 | 4 jours | Standard | General Dry Air | 0.01μm | 70 | [Tuyauterie à simple pression] Tuyau à simple effet | 1/4 | Clean Room Specifications (Prevent dust) | NA | [Métal] Alliage d'aluminium | NA | nul～0.99 | - | ||
330.65 € | 1 | 26 jours | Standard | General Dry Air | 0.01μm | 70 | [NPT] NPT femelle | 1/4 | Clean Room Specifications (Prevent dust) | NA | [Métal] Alliage d'aluminium | NA | nul～0.99 | - | ||
407.97 € | 1 | 26 jours | Standard | General Dry Air | 0.01μm | 70 | TSJ | 1/4 | Clean Room Specifications (Prevent dust) | NA | [Métal] Alliage d'aluminium | NA | nul～0.99 | - | ||
407.97 € | 1 | 26 jours | Standard | General Dry Air | 0.01μm | 70 | UOJ | 1/4 | Clean Room Specifications (Prevent dust) | NA | [Métal] Alliage d'aluminium | NA | nul～0.99 | - | ||
369.06 € | 1 | 26 jours | Standard | General Dry Air | 0.01μm | 140 | [Tuyauterie à simple pression] Tuyau à simple effet | 1/4 | Clean Room Specifications (Prevent dust) | NA | [Métal] Alliage d'aluminium | NA | nul～0.99 | - | ||
369.00 € | 1 | 26 jours | Standard | General Dry Air | 0.01μm | 140 | [NPT] NPT femelle | 1/4 | Clean Room Specifications (Prevent dust) | NA | [Métal] Alliage d'aluminium | NA | nul～0.99 | - | ||
463.34 € | 1 | 26 jours | Standard | General Dry Air | 0.01μm | 140 | TSJ | 1/4 | Clean Room Specifications (Prevent dust) | NA | [Métal] Alliage d'aluminium | NA | nul～0.99 | - | ||
463.32 € | 1 | 26 jours | Standard | General Dry Air | 0.01μm | 140 | UOJ | 1/4 | Clean Room Specifications (Prevent dust) | NA | [Métal] Alliage d'aluminium | NA | nul～0.99 | - |
Loading...
Configurer
Propriétés de base
-
Type
- Standard
- Composants associés (élément de rechange)
-
Qualité de l'air comprimé
- General Dry Air
-
Niveau de filtration
- 0.01μm
-
Débit d'air servant au traitement(l/min)
-
Type de connexion
- NPT
- Tuyauterie à simple pression
- TSJ
- UOJ
- NPT
-
Filetage nominal de tuyauterie
- 1/4
-
Environnement de fonctionnement
- Clean Room Specifications (Prevent dust)
-
Robinet de purge
-
Matériau de la cuve
- Métal
- Métal
-
Protection de cuve
-
Compatible Models
- SFA10□-02
- SF30□-20
-
Type
- ED□S-X10V
- SFA100
- SFA200
- SFA300
-
Filtrer par type de données CAO
- 2D
- 3D
Filtrer par jours d'expédition standard
-
- Tous les articles
- 4 jours ou moins
- 26 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.