Welding Wire (High-Tensile Steel) MG-60 (Numéros de référence)
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Référence pièce
|
|---|
| MG-60-1.2-20 |
| MG-60-1.6-20 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Wire Diameter (mm) | Current range, lower (A) | Current range, vertical position, elevating, upper | |
|---|---|---|---|---|---|---|---|
239.74 € | 1 | 8 jours | 1.2 | 100～350 | 100~180 | ||
239.93 € | 1 | 15 jours | 1.6 | 200～550 | - |
Loading...
Informations de base
| Product Type | Fil de soudage | JIS Standard | Z3312 G 59J A 1 U C 3M1T (Previously YGW21) | AWS Standard | A5.28 ER80S-G Applicable |
|---|---|---|---|---|---|
| Compatible Material Type | Typical MG Wire for 590 MPa Class Steel | Amount Of Content | 1 Box (20 kg) | Mass(g) | 20000 |
| Application and Usage Characteristic | Fillet welding and but welding of steel frames, bridges, construction machinery, general machinery, pressure vessel, etc. Arc is secured with wide current area and workability is good. Suitable for downward, horizontal and lateral welding in high current area. Excellent crack resistance and impact properties. | Main Points of Work | Pear-shaped bead cracks may occur in welded parts on the first layer of a single bevel groove. Be sure to use a low current for welding the first layer on thick plates with narrow openings. To prevent low temperature cracking, be sure to preheat to 50°C-100°C depending on plate thickness and constraints. See Pages 142 and 143. | Chemical Composition of Deposited Metal C(%) | 0.08 |
| Chemical Composition of Deposited Metal Si(%) | 0.51 | Chemical Composition of Deposited Metal Mn(%) | 1.39 | Chemical Composition of Deposited Metal Mo(%) | 0.29 |
| Chemical Composition of Deposited Metal P(%) | 0.012 | Chemical Composition of Deposited Metal S(%) | 0.009 | Mechanical Properties of Weld Metal Proof Stress MPa | 590 |
| Mechanical Properties of Weld Metal Proof Stress, Tensile Strength MPa | 670 | Mechanical Properties of Weld Metal Proof Stress, Elongation(%) | 26 | Mechanical Properties of Weld Metal Proof Stress, Absorption Energy(J) | 120(-5℃) |
| Heat Treatment | Leave Welded | Authorized by the Classification Society of Japan | NK,DNV |
Configurer
Propriétés de base
-
Wire Diameter(mm)
-
Current range, lower(A)
-
Current range, vertical position, elevating, upper
-
Type
- MG-60
Filtrer par jours d'expédition standard
-
- Tous les articles
- 8 jours ou moins
- 15 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.