Laser S1, fraise 125 (Numéros de référence)
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
LS1-5
Informations de base
| Product Type | Couteau en diamant | Application | Pour béton, mortier | Outer Diameter(mm) | 125 |
|---|---|---|---|---|---|
| Blade thickness(mm) | 1.7 | Hole Diameter(mm) | 22 | Tip Height(mm) | 8 |
| Details Type | For Cutting Rebar Reinforced Concrete | Included ring(mm) | 20 | JAN Code | 4936091041010 |
| Features | Has the highest cutting speed level in the industry. The product is very safe. Quenched board: Treating the board with heat improves its strength. New wave board: Increased rigidity due to the wave shape of the quenched board. Laser welding: Improved the strength of the joint as the joint between the chip and the board has been welded with laser. High strength bond: Even the edge of the blades have strength because the newly developed bond has been used. Turbo edge: Improved sharpness by reducing the cutting resistance between the material to be cut and the contact area. The sharpness of the blade is maintained stably by preventing the diamond layer from overheating and by clearing the cut chips. Diagonal slits: the sharpness of the blade is maintained by preventing the diamond layer from overheating and by clearing the cut chips effectively. Has reinforced mesh. Even if the surface cracks, the edge of the blade is such that the cracks do not spread easily. Mesh is embedded in the blade to prevent it from cracking. It has a thin blade made by optimizing the edge and substrate. Cutting speed is increased by 2.0 times with the effective thin blade and turbo blade edge. | Application | Cuts rebar reinforced (10 mm bars) concrete |
Vous vous trouvez sur la page de Laser S1, fraise 125, le numéro d'article est le suivant: LS1-5.
Veuillez trouver plus de détails concernant les particularités et les dimensions sous le numéro d'article LS1-5.
Configurer
Propriétés de base
-
Type
- LS1
Filtrer par jours d'expédition standard
-
- Tous les articles
- 6 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.