Tableaux / armoires / boîtiers（Installation：Non spécifié）

?* À propos du délai d'expédition et des prix

• 

  Boîtier en fonte d'aluminium avec écran étanche à l'eau et aux poussières, série　HQ

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  ・Aluminum die cast box with waterproof and dust proof shield (HQ).

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	44.24 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Boîte plastique étanche à l'eau / aux poussières, type à commutation, série BCAL

  TAKACHI ELECTRONICS ENCLOSURE

  Waterproof/Dust-proof Switching Type Plastic Box (BCAP)
  
  [Features]
  - An IP65-grade open/close box that's easy to maintain.
  - A general-purpose plastic box available for various fields, including FA control/electric facility works.
  - The BCAP series comes in 50 sizes; the top cover is available in whitish gray (ABS) or see-through (polycarbonate).
  - The BCPC series comes in 46 light-gray sizes, made of polycarbonate for heat and flame resistance.
  - Use for communication equipment, solar power connection boxes, etc.
  - Only the G type is available for BCAP507018, 507025, 608018 and 608028.
  - Transparent covers are not available for the BCPC series.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	23.11 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîte plastique avec protecteur en silicone TWS

  TAKACHI ELECTRONICS ENCLOSURE

  An elastic protector that protects critical internal equipment from falling impacts.
  
  [Features]
  - A small general-purpose plastic case with silicon protector
  - The flexible, slip-resistant cover protects equipment from falling impacts.
  - 11 types in total; available in a choice of 18 colors.
  - Internal case material: Cases with the color-codes B (black) and G (light gray) are made from ABS resin (UL94HB). Cases with the color-code W (off-white) are made from flame-retardant ABS resin (UL94V-0).
  - Note that the material varies according to the color code.
  - Screw the silicon protector and plastic case together at the joint.
  - Do not over-tighten the screw; this will cause the screw to bite into the silicon.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	9.26 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Boîte en plastique polycarbonate étanche à l'eau / aux poussières, avec ouverture et fermeture, type BCPC

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Easily to maintain opening and closing box with protection rating of IP65.
  · A general purpose plastic box which is available for various applications such as FA control and electrical facility works.
  · All the products in the BCAP series are of size 50, and the top cover is available in either white-gray (ABS) or transparent (polycarbonate).
  · All the products in the BCPC series are of size 46 in light gray polycarbonate which has excellent heat resistance and is flame retardant.
  · Suitable for communications equipment and solar power connection boxes, etc.
  · Only the G type is available for BCAP507018, 507025, 608018, and 608028.
  · Models which include a transparent cover are not available for the BCPC series.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	18.66 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Boîtier en fonte d'aluminium, série TD

  TAKACHI ELECTRONICS ENCLOSURE

  Aluminum Die Cast Box (TD)
  
  [Features]
  · 39 models with 13 sizes and 3 types of color specifications are available.
  · Box with superior impact resistance.
  · Thin and clean design with corner R.
  · Unprocessed N type can also be used as a conduction box.
  · Small, round design.
  · Available unprocessed and in standard colors, with 2 types of paint finish (light gray and black).

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	11.86 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîte à crémaillère, série MOR

  TAKACHI ELECTRONICS ENCLOSURE

  Rack Case (MOR)
  
  [Features]
  · The MOR Series is a series of assembled rack cases with 7 heights, 4 depths, and 28 sizes available.
  · Lightweight type made completely from aluminum.
  · Both the top cover and the bottom cover lack heat dissipation holes.
  · There is an assortment of three color types; gray and light gray (panel HL silver), all black (panel HL black), and black (panel HL silver).
  · Case has superior design characteristics: rounded corners providing a soft feel and screws not exposed on the surface.
  · Flat structure mated to frame for both front panel and rear panel so machining can be performed easily.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	122.96 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Boîte plastique résistant à la chaleur, série SW-T

  TAKACHI ELECTRONICS ENCLOSURE

  Heat Resistant Plastic Case (SW-T)
  
  [Features]
  - One-touch opening/closing.
  - Large internal space available for use.
  - Small, multi-purpose case.
  - The ABS-resin SW series features 17 models in two different colors: S (light blue) and B (black).
  - The flame-retardant, heat-resistant ABS-resin SW-N series features 13 G (gray) models.
  - The ABS SW-T series features 6 B (black) models.
  - Full line-up of optional parts, including printed circuit boards that fit the case perfectly and parts for board mounting (sold separately).

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	2.18 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Boîte de châssis en aluminium universelle, série UC

  TAKACHI ELECTRONICS ENCLOSURE

  Universal Aluminum Sash Case (UC)
  
  [Features]
  - The UC series uses extruded aluminum on the top/bottom covers; it is useful for a broad range of applications, including corner-R mounted electric, electronic, and control equipment.
  - The front and black panel on the GX type have different colors; light gray and dark gray.
  - The top and bottom covers have 2 and 3 grooves respectively in their fronts and backs; use these for transfer panels, sub panels, printed circuit board mounting, etc.
  - Chassis, chassis mounting brackets, panel antishock fixtures, and hexalobular hole mounting slippage prevention screws are available as optional components.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	19.33 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Boîte plastique portative, série LC

  TAKACHI ELECTRONICS ENCLOSURE

  Handheld Plastic Case (LC)
  
  [Features]
  - This handheld case features a sharp design, including tapered elements.
  · The case material is flame retardant ABS resin (UL94V-0).
  · Allows for 8 battery configurations: 2 AA batteries, 3 AA batteries, 4 AA batteries, 2 AAA batteries, 3 AAA batteries, 4 AAA batteries, one 006P (9 V) battery, or no batteries.
  ▪ Includes battery terminal symbols (⊕ and ⊖).
  - Can be used for a variety of hand-held equipment including measuring instruments, detection instruments, communications devices, and medical devices.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	4.64 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîte à crémaillère avec poignée EIA, série ERH

  TAKACHI ELECTRONICS ENCLOSURE

  Rack Case with EIA Handle
  
  [Features]
  · The ERH series features a total of 35 differently sized cases, with 5 different heights and 7 different depths available.
  · Sectional EIA standard rack case with panel structure that makes machining, silk printing, and carving easy to perform.
  · There are two types of cases available: one is silver (S series) and the other is black (B series).

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	113.80 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Boîte en plastique retardateur de flamme, type TWF, avec pied à bride

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  • With flange foot eases installation.
  • 23 sizes of flame-retardant plastic cases, and available in two colors - off-white and dark gray.
  · Equipped with a boss for mounting on a circuit board.
  · May be used with a variety of devices, such as measuring instruments, communication devices, and controllers, etc.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	2.10 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîte plastique avec capot étanche à l'eau / aux poussières série BCAR

  TAKACHI ELECTRONICS ENCLOSURE

  Plastic Box with Waterproof/Dustproof roof (BCAR)
  
  [Features]
  · A plastic box with a roof for outdoor use.
  · Plastic box that is optimal for devices used outdoors such as outdoor communications equipment, radio equipment, and control devices.
  - All products in the BCAR series are of size 45, and the top cover is available in white-gray (ABS) as well as transparent (polycarbonate).
  - All products in the BCPR series are of size 41 in light gray, and are made of polycarbonate which has excellent heat resistance is flame retardant.
  · Suitable for communications equipment and solar power connection boxes, etc.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	19.95 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Boîte plastique avec couvercle en silicone, série LCS

  TAKACHI ELECTRONICS ENCLOSURE

  Plastic Case with Silicon Cover (LCS)
  
  [Features]
  - Handheld case with silicon cover.
  - The flexible non-slip cover therefore protects devices from falls.
  - Internal case is flame retardant ABS resin (UL94V-0).
  - 8 battery configurations: 2 AA, 3 AA, 4 AA, 2 AAA, 3 AAA, 4 AAA, one 006P (9 V), and no batteries.
  - ⊕ and ⊖ battery terminal symbols included.
  - Use on a variety of hand-held equipment, including measuring instruments, detection instruments, communications devices, and medical devices.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	9.04 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîtier en acier inoxydable étanche à l'eau / aux poussières (fermeture à vis), série SSB

  TAKACHI ELECTRONICS ENCLOSURE

  Waterproof/Dustproof Stainless Steel Box (Screw Closed) (SSB)
  
  [Features]
  · Waterproof/dustproof box secured in four places by set screws.
  · Stainless steel (SUS 304) box featuring superior corrosion, salt and weather resistance.
  · A box that is effective for reducing both internal and external electromagnetic radiation.
  · #400 polishing is used as a surface treatment.
  · Screws are held in place by screw retaining washers.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	151.79 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîte plastique, série SW

  TAKACHI ELECTRONICS ENCLOSURE

  Plastic Case (SW)
  
  [Features]
  · One-touch opening and closing structure.
  · Large, usable internal space.
  · Small, multi-purpose case.
  · ABS plastic SW series is available in two colors: S (light gray) and B (black), and 17 models; the flame retardant ABS plastic SW-N series is available in G (gray) and 13 models; the heat resistant ABS plastic SW-T series is available in B (black) and 6 models.
  · There is also a full line-up of optional parts such as printed circuit boards that fit the case perfectly and parts for board mounting (optional parts sold separately).

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	1.10 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîtier en acier inoxydable étanche à l'eau / aux poussières avec mécanisme d'ouverture et de fermeture, série　SSM

  TAKACHI ELECTRONICS ENCLOSURE

  Opening and closing format waterproof/dustproof stainless box (SSM)
  
  [Features]
  · Latched waterproof/dustproof stainless box.
  · A stainless steel (SUS304) box having superior corrosion, salt, and weather resistance.
  · Effective for reducing both internal and external electromagnetic waves.
  · #400 polishing is used for the surface treatment.
  · Keyed access reduces possibility of tampering.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	168.62 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîtier en aluminium KlipponR série K

  WEIDMUELLER

  [Features]
  • Aluminum die cast, and compatible with IP66, IP67, and IP68.
  • At 19 size, three models are available, including standard, RAL7001 coated, and explosion-proof (ATEX).

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	33.45 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Boîte de commande en fonte d'aluminium type AD

  TAKACHI ELECTRONICS ENCLOSURE

  Comes with IP65 Waterproof/dustproof function.
  
  [Features]
  • A thick and sturdy aluminum die cast box.
  • Ideal material and construction for electronic/electric control device cases for inside tunnels and for oil plants.
  · The cover screw cannot be removed from the top cover because of the falloff prevention screw.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	35.59 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Boîte en fonte d'aluminium étanche à l'eau / aux poussières, type ALC

  TAKACHI ELECTRONICS ENCLOSURE

  Protection grades IP67, 65. Made from sturdy die cast aluminum.
  
  [Features]
  · Well-designed die cast aluminum box.
  · Protection grades IP67, 65. Made from sturdy die cast aluminum.
  · Mount the included hinge to prevent the cover from falling off.
  · *Hinge not included for types with heights of 33 and 50.
  · The box can be attached to walls by screws simply by removing the POM plastic clip-on cover.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	59.55 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîte Omni modèle CU-N

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · The cover is made of iron and the chassis is a standard electronics case made of colored aluminum.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	19.37 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Boîte en polycarbonate étanche à l'eau / aux poussières, modèle SPCM

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · A box made of a polycarbonate with superior impact resistance.
  · Can choose from a rich product assortment including a total of 21 sizes.
  · There are two types of top covers, white-gray and clear, available.
  ▪ Drilling for wiring is possible as the product comes with an M-screw sized knockout.
  · Can be used in various applications such as terminal relay boxes, control boxes, communication boxes, etc.
  · Direct insertion of a screw into the cover screw mount enables mounting on a wall surface etc. without requiring an externally mounted leg.
  - As far as the protection rating is concerned, notes for use are given on Pages 2 - 3.
  - Please refer to the above pages when selecting a box.
  - To open the knock-out, fix the case in place with the cover screws, align a flat-head screwdriver with the groove and hit lightly with a hammer, etc.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	18.13 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Type THA209, boîte de relais étanche à l'eau

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · This is a waterproof relay box which includes a terminal block and features an integrated cable gland and body structure.
  · Triple branching and quadruple branching types are available.
  · Work can be performed easily via screw-based connection of the terminal block.
  · Six different terminal elements are available: 3P, 5P, 8P, 3WP, 4WP and 3LP.
  · Compatible with cables of various wire diameters through use of an optional rubber bushing.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	29.13 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Boîte en plastique polycarbonate étanche à l'eau / aux poussières, avec ouverture et fermeture, type BCPK

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · A plastic box with included key which is available for various areas such as FA control/electric facility work, communication equipment, etc..
  · All the products in the BCPK series are made of polycarbonate which has excellent heat resistance and flame retardation.
  · Suitable for communication equipment and solar power connection boxes.
  · Only the G type is available for BCAK507018, 507025, 608018 and 608028.
  · Models which include a transparent cover are not available for the BCPK series.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	30.94 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîte plastique type CSS avec couvercle en silicone

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Small form plastic case with silicon cover.
  · The cover is flexible and does not slip easily, protecting devices from impact due to falling.
  · A smartphone size CSS115 that takes 2 coin batteries (CR2032) and a type that does not use batteries have been newly added.
  · Replacing batteries is easy for the type that takes coin batteries (CR2032).
  Use the included terminal by soldering it on the circuit board.
  · For use with small devices like remote controllers, wireless devices, and simple measuring instruments, etc.
  · Customers can select from 3 sizes, 6 different models, and 12 different color finishes.
  · Silicon covers with and without a front face opening are available.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	4.95 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîte plastique portative CS

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · A smartphone size CS115 that takes 2 coin batteries (CR2032) and an N type that does not use batteries have been newly added.
  · Replacing batteries is easy for the type with space for inserting coin batteries (CR2032). Use the included terminal by soldering it on the circuit board.
  · For use with small devices like remote controllers, wireless devices, simple measuring instruments, etc.
  · Choose from 3 sizes, 6 types, and 2 colors (white/black).

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	2.21 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîte de châssis en aluminium, forme SL

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  • The SL series is a case series with 351 sizes, including height, 13 types, width, eight types, and depth, five types.
  · Case with panel construction that makes machining, silk printing, and carving easy.
  • This is an assembly-type case that can be used even with an independent case, or with a rack-mounted unit.
  • This is a JIS standard rack case using a mount bracket with height of 49, 99, 149, 199, 249, 299 W dimension 430 (431) mm.
  • This is an EIA standard rack case using a mount bracket with height of 44, 88, 132.5, 177, 221.5 W dimension 430 (431) mm.
  • When a side surface is used as the front surface, it becomes a panel case.
  • The panel, frame, and side panel can be combined with silver and black.
  • Drill holes to fasten the mount bracket and tilt stand mounting.
  • In case width × depth, 120×160, 120×230, 160×160, 160×230, 200×160, 260×160 ceiling panel, there is no heat dissipation hole.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	90.17 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîte métallique type HU-N

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · The cover is made of iron and the chassis is a standard electronics case made of colored aluminum.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	30.17 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

Loading...