Connecteurs entre circuits imprimés（M·N·O：Autre）

?* À propos du délai d'expédition et des prix

• 

  Connecteur à raccordement par le bas avec pas de 2.54mm, série MDF7

  HIROSE ELECTRONIC

  With the 2.54-mm pitch bottom entry connector and circuit board height can be set freely. Also able to be connected with IPM and IGBT.
  
  [Features]
  ▪ Circuit board gap dimensions can be set freely: With the header pin pass-through type construction and a number of header variations, circuit board gap dimensions can be set outside of predetermined levels.
  ▪ Unified part loading surface: 2 circuit board part loading surfaces can be oriented in the same direction while facing each other.
  ▪ Rich variation: single-array, double-array, and tin/gold plating available.
  ▪ In addition, we provide headers that conform to all circuit board gap dimensions for compatibility with items outside the catalog. Feel free to discuss further details with us.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.51 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Embase à montant à connexion verticale, pas de 2.5mm, série MDF14A

  HIROSE ELECTRONIC

  [Features]
  ■ For low-cost vertical board mounting with no reseating necessary
  · Post header specially designed for vertical board mounting with no reseating necessary.
  · Low-cost connection provided by a combination receptacle and plug design.
  ■ Current capacity: 5A
  · ø0.8mm round post pins provide extra strength and enable current capacity of 5A.
  ■ Temporary board fixing mechanism
  · Kinking keeps boards temporarily in place.
  ■ Pin-out specifications
  · Compatible with a variety of pin-out specifications.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.33 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur de carte CF séries MI20 / 21

  HIROSE ELECTRONIC

  This is a CF card connector. Wide variety available to suit different applications, with differing mount orientation, standoff inclusion, ejector button, and supported cards.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	3.81 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur arrière, capot de fiche pour cartes d'E / S

  HIROSE ELECTRONIC

  This is an inner lock plug cover for back connector NX series for I/O cards.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	2.35 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteurs arrière série NX pour cartes d'E / S

  HIROSE ELECTRONIC

  These are back connectors for I/O cards. The low profile design is shielded using a metal shell.
  
  [Features]
  • Ultra-low profile: The mounted height of the receptacle connector is 2.9 mm for an ultra-low profile, allowing mounting on type II I/O cards.
  • Shell is metal: A metal shell was used for better shielding.
  • Structured so that the metal shell always touches before the contacts do.
  • Full ESD shielding: A cover over the mold provides full ESD shielding.
  • Locks securely: An inner lock makes locking more secure.
  • Less wiring work: The plug-side wiring uses AWG #28 pressure contacting (discrete type), so wiring is less work.
  • Sequence structure: The receptacle connector for the I/O card is a 0.8 mm-pitch, SMT-type sequence structure.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	5.12 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

Loading...