GANTER Doigts diviseurs（Matériau du corps：Acier）
Affiner la recherche en précisant Type
-
Bouton standard -
Type de levier -
Avec bague -
Composants associés -
Sans bouton -
Boutons spéciaux
?* À propos du délai d'expédition et des prix
-
- En promotion
Indexing plungers, Steel, with knob, with and without rest position
GANTER
GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 5.12 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Indexing plungers, Steel
GANTER
GN 7017 indexing plungers are activated through a lever and are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 6.42 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Indexing plungers, Steel, with lifting ring / with wire loop, without rest posit
GANTER
GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 4.08 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Mini indexing plungers, covered indexing mechanism
GANTER
Mini indexing plungers GN 822 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
With Type C the knob can be turned by 30° and a notch keeps the knob in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 5.36 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Mini indexing plungers, open indexing mechanism
GANTER
Mini indexing plungers GN 822.1 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
Type C with rest position is used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 5.40 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
- En promotion
Indexing plungers for thin walled equipment
GANTER
Indexing plungers GN 607.2 have been developed for installation in thin walled equipment.
It has to be taken into consideration that, depending on the mounting plate thickness 's', the protruding plunger length 'l1' and the position of the hexagon nut on its centre bush, the plunger nose might not always be fully retractable.
For design reasons the positional accuracy of this indexing plunger is not as precise as plunger GN 607.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 17.36 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Indexing plungers for welding, with rest position
GANTER
Indexing plungers GN 607.5 with rest position are used in cases where the indexing pin is temporarily not allowed to protrude. After pulling out, the knob is turned by 90°.
A notch keeps the plunger in this position.
The GN 607.5 indexing plungers are intended for welded fixing, in particular for use in steel square tubings.
The lug d2 is intended for positioning.
The plastic knob with the in-moulded indexing pin is driven on after the welding process.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 15.66 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
- En promotion
Indexing plungers for welding, without rest position
GANTER
Indexing plungers GN 607.4 are designed for welded fixing, in particular for use in steel square tubings.
The lug d2 is intended for positioning.
The plastic knob with the in-moulded indexing pin is driven on after the welding process.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 14.96 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Indexing plungers with rest position, for thin walled equipment
GANTER
Indexing plungers GN 607.3 have been developed for installation in thin walled equipment.
It has to be taken into consideration that, depending on the mounting plate thickness 's', the protruding plunger length 'l1' and the position of the hexagon nut on its centre bush, the plunger nose might not always be fully retractable.
For design reasons the positional accuracy of this indexing plunger is not as precise as plunger GN 607.
Indexing plungers with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 20.32 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
- En promotion
Indexing plungers, removable
GANTER
Indexing plungers GN 817.8 have been designed such that special versions of the indexing pins can also be made economically in smaller unit quantities.
If reqired, the indexing pins can be machined or made by the user as shown in the drawing above. They are assembled with a countersunk screw and can therefore be assembled several times. All parts are supplied in a non-assembled set.
The indexing plungers type C / CK are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 12.46 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Indexing plungers, Steel / Plastic-knob
GANTER
Indexing plungers GN 607.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
Indexing plungers GN 607.1 are distinguished for their small dimensions. The extremely low Stainless Steel-Lock nuts GN 909 enlarge the mounting options. The locking tab is an integral part of the knob thus giving reliable operation at all times.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 13.62 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Indexing plungers, Steel / Plastic-knob
GANTER
Indexing plungers GN 607 are distinguished for their small dimensions.
The extremely low lock nuts GN 909 enlarge the mounting options.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 10.46 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Mini indexing plungers, covered indexing mechanism, with red knob
GANTER
Mini indexing plungers GN 822 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
With type C the knob can be turned by 30° and a notch keeps the knob in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 5.36 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Mini indexing plungers, open indexing mechanism, with red knob
GANTER
Mini indexing plungers GN 822.1 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
Type C with rest position is used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 5.40 € Prix spécial Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
| Marque |
|---|
| Série du produit |
| CAD |
| à partir de∗ |
| Délai d'expédition minimum ： |
| Type |
| Mécanisme de verrouillage |
| Méthode de montage |
| Longueur totale |
| Matériau du corps |
| Tout inoxydable |
| Matériau de l'embout |
| D.E. du corps / filetage M(mm) |
| Course S(mm) |
| Traitement de surface d'embout |
| Traitement thermique de l'embout |
| D.E. de l'embout d(Ø) |
| Longueur L(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Marque | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER |
| Série du produit | Indexing plungers, Steel, with knob, with and without rest position | Indexing plungers, Steel, with lifting ring / with wire loop, without rest posit | Indexing plungers with rest position, for thin walled equipment | Mini indexing plungers, covered indexing mechanism, with red knob | Mini indexing plungers, open indexing mechanism, with red knob | |||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| à partir de∗ | 5.12 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 6.42 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 4.08 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 5.36 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 5.40 € *Prix unitaire/configuration de base Remise sur volume | 17.36 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 15.66 € *Prix unitaire/configuration de base Remise sur volume | 14.96 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 20.32 € *Prix unitaire/configuration de base Remise sur volume | 12.46 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 13.62 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 10.46 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 5.36 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 5.40 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume |
| Délai d'expédition minimum ： | Jour même | Jour même | Jour même | Jour même | 7 jours | Jour même | 7 jours | Jour même | 7 jours | Jour même | Jour même | Jour même | Jour même | 7 jours |
| Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mécanisme de verrouillage | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Méthode de montage | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Longueur totale | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Matériau du corps | Acier | Acier | Acier | Acier | Acier | Acier | Acier | Acier | Acier | Acier | Acier | Acier | Acier | Acier |
| Tout inoxydable | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Matériau de l'embout | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| D.E. du corps / filetage M(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Course S(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Traitement de surface d'embout | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Traitement thermique de l'embout | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| D.E. de l'embout d(Ø) | 3 ～ 10 | 4 ～ 10 | 3 ～ 10 | 4 ～ 7 | 4 ～ 7 | 6 ～ 8 | 6 ～ 8 | 6 ～ 8 | 6 ～ 8 | 7 ～ 12 | 6 ～ 8 | 6 ～ 8 | 4 ～ 7 | 4 ～ 7 |
| Longueur L(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filtrer par:
Stock
-
- Stock Items Included
Affiner la recherche en précisant les spéc./dim.
-
Mécanisme de verrouillage
-
Non fourni
-
Avec verrouillage
-
Sans verrouillage
-
Non fourni
-
Méthode de montage
- À visser
- Ajustement forcé
- Montage par boulon
- Autres
- Embase
-
Longueur totale
- Standard
- Court
-
Matériau du corps
- Acier
- Acier inoxydable
- Zinc moulé sous pression
- Autres
-
Tout inoxydable
- Applicable
- Non conforme
-
Matériau de l'embout
- Acier
- Acier inoxydable
-
D.E. du corps / filetage M(mm)
-
Course S(mm)
-
Traitement de surface d'embout
-
Traitement thermique de l'embout
-
D.E. de l'embout d(Ø)
-
Longueur L(mm)
Affiner la recherche en spécifiant le fabricant
-
- MISUMI (17)
- NORELEM (81)
- KIPP (81)
- HALDER (23)
- NABEYA BI-TECH (20)
- GANTER (14)
- KONISHI MFG (14)
- NABEYA (1)
- TOSHIN CASTER (1)
- ELESA (0)
Affiner la recherche en précisant le type de données CAO
-
- 2D
- 3D
Affiner la recherche en précisant le délai
-
- Tous les articles
- Jour même
- 2 jours ou moins
- 3 jours ou moins
- 4 jours ou moins
- 5 jours ou moins
- 6 jours ou moins
- 7 jours ou moins
- 8 jours ou moins
- 9 jours ou moins
- 11 jours ou moins
Catégories relatives à « Doigts diviseurs »
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.