Type Code Seach | *NOT READY*: #CODE

Suggestion de mots-clés

Suggestions de numéros d'articles

Produits discontinués

GANTER Doigts diviseurs（Page 2）

Affiner la recherche en précisant Type

Bouton standard
Type de levier
Avec bague
Composants associés
Sans bouton
Boutons spéciaux

Données à afficher: 30; 45; 60

Trier par :

?* À propos du délai d'expédition et des prix

Indexing plungers with rest position, Stainless Steel / Plastic knob

GANTER

Stainless Steel-Indexing plungers GN 617.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted.
A notch keeps the plunger in this position.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	14.60 €
Délai d'expédition minimum ：	Jour même

*Prix unitaire/configuration de base

Indexing plungers with rest position, Steel / Plastic knob

GANTER

Indexing plungers GN 617.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted.
A notch keeps the plunger in this position.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	9.98 €
Délai d'expédition minimum ：	Jour même

*Prix unitaire/configuration de base

Indexing plungers without thread, Steel / Plastic knob

GANTER

Indexing plungers GN 618 without thread are for applications where welding, resin bonding (Loctite) or clamping is favoured.
Type G has been designed for applications where the indexing plunger is not operated with the standard knob.
The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), additional information can be submitted on request.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	7.94 €
Délai d'expédition minimum ：	Jour même

*Prix unitaire/configuration de base

Indexing plungers, Plunger Stainless Steel

GANTER

Stainless Steel-Indexing plungers GN 608.5 are distinguished for their small dimensions.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	11.06 €
Délai d'expédition minimum ：	Jour même

*Prix unitaire/configuration de base

Indexing plungers, removable

GANTER

Indexing plungers GN 817.9 have been designed such that special versions of the indexing pins can also be made economically in smaller unit quantities.
If reqired, the indexing pins can be machined or made by the user as shown in the drawing above. They are assembled with a countersunk screw and can therefore be assembled several times. All parts are supplied in a non-assembled set.
The indexing plungers type C are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	14.36 €
Délai d'expédition minimum ：	4 jours

*Prix unitaire/configuration de base

Indexing plungers, Stainless Steel / plastic knob

GANTER

Type G or GK of the indexing plungers GN 613 have been designed for applications where the indexing plunger is not operated with the standard knob.
The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.
A special screw driver GN 613.1 is available. Two slots are provided in the upper end of the body which are accessible with the knob in its retracted position.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	10.86 €
Délai d'expédition minimum ：	Jour même

*Prix unitaire/configuration de base

Indexing plungers, Stainless Steel / Plastic-knob

GANTER

Stainless Steel-Indexing plungers GN 607.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
Stainless Steel-Indexing plungers GN 607.1 are distinguished for their small dimensions. The extremely low Stainless Steel-Lock nuts GN 909.5 enlarge the mounting options. The locking tab is an integral part of the knob thus giving reliable operation at all times.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	22.44 €
Délai d'expédition minimum ：	Jour même

*Prix unitaire/configuration de base

Indexing plungers, Stainless Steel / Plastic-knob

GANTER

Stainless Steel-Indexing plungers GN 607 are distinguished for their small dimensions.
The extremely low Stainless Steel-Lock nuts GN 909.5 enlarge the mounting options.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	14.80 €
Délai d'expédition minimum ：	Jour même

*Prix unitaire/configuration de base

Indexing plungers, Stainless Steel, with knob, with and without rest position

GANTER

GN 717 Stainless Steel-Indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	5.40 €
Délai d'expédition minimum ：	Jour même

*Prix unitaire/configuration de base

Indexing plungers, Steel

GANTER

GN 7017 indexing plungers are activated through a lever and are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	6.34 €
Délai d'expédition minimum ：	Jour même

*Prix unitaire/configuration de base

Indexing plungers, Steel / long Plastic-knob

GANTER

Indexing plungers GN 817.2 correspond to GN 817, they only differ by a longer knob.
Type C / CK are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	9.16 €
Délai d'expédition minimum ：	Jour même

*Prix unitaire/configuration de base

Indexing plungers, Steel / Plastic-knob

GANTER

Indexing plungers GN 607.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
Indexing plungers GN 607.1 are distinguished for their small dimensions. The extremely low Stainless Steel-Lock nuts GN 909 enlarge the mounting options. The locking tab is an integral part of the knob thus giving reliable operation at all times.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	12.64 €
Délai d'expédition minimum ：	Jour même

*Prix unitaire/configuration de base

Indexing plungers, Steel / Plastic-knob

GANTER

Indexing plungers GN 607 are distinguished for their small dimensions.
The extremely low lock nuts GN 909 enlarge the mounting options.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	9.86 €
Délai d'expédition minimum ：	Jour même

*Prix unitaire/configuration de base

Indexing plungers, Steel / Plastic-knob

GANTER

Indexing plungers GN 817.1 (Type C) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	9.86 €
Délai d'expédition minimum ：	5 jours

*Prix unitaire/configuration de base

Indexing plungers, Steel, with knob, with and without rest position

GANTER

GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	4.76 €
Délai d'expédition minimum ：	Jour même

*Prix unitaire/configuration de base

Indexing plungers, Steel, with lifting ring / with wire loop, without rest posit

GANTER

GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	4.04 €
Délai d'expédition minimum ：	Jour même

*Prix unitaire/configuration de base

Indexing plungers, Steel, with red knob

GANTER

Indexing plungers GN 817 with rest position (Type C / CK) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	7.34 €
Délai d'expédition minimum ：	Jour même

*Prix unitaire/configuration de base

Indexing plungers, with rest position, Plunger Stainless Steel

GANTER

Indexing plungers GN 608.6 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
Indexing plungers GN 608.6 are distinguished for their small dimensions. The locking tab is integrated into the knob thus giving reliable operation at all times.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	11.46 €
Délai d'expédition minimum ：	5 jours

*Prix unitaire/configuration de base

Key for locking plungers

GANTER

For locking plungers GN 816.1 with operation with key (Type B / BK) this key is required to move the plunger. Locking plungers Ø 6 and 8 have the same key GN 816.1-10.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	1.58 €
Délai d'expédition minimum ：	4 jours

*Prix unitaire/configuration de base

Key for locking plungers

GANTER

For locking plungers GN 816 with operation with key (Type B / BK) this key is required to move the plunger. Locking plungers Ø 6 and 8 have the same key GN 816-10.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	7.50 €
Délai d'expédition minimum ：	5 jours

*Prix unitaire/configuration de base

Locking plungers, PUSH-PUSH locking mechanism

GANTER

The indexing pin in the locking plungers GN 514 is moved via a so-called cardioid mechanism.

This mechanism means that the indexing pin is both extended and retracted alone by pressing the operating button (PUSH-PUSH locking mechanism).

Please note that the indexing pin cannot absorb any axial forces and that it retracts virtually by spring action; the indexing pin must therefore remain free and easy to move.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	14.84 €
Délai d'expédition minimum ：	Jour même

*Prix unitaire/configuration de base

Mini indexing plungers Zinc die casting / Plastic-knob

GANTER

Mini indexing plungers GN 822.8 are distinguished for their small dimensions. They are mounted by countersunk screws.
The mini indexing plungers present an affordable alternative to the GN 608 and GN 608.1 indexing plungers.
In type C, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	5.74 €
Délai d'expédition minimum ：	Jour même

*Prix unitaire/configuration de base

Mini indexing plungers, covered indexing mechanism

GANTER

Mini indexing plungers GN 822.6 are distinguished for their small dimensions.
Based on the principle of the GN 822 mini indexing plungers, this model combines their clever type of construction with a complete series of all current sizes of bolts and threads. They provide a reasonably priced alternative to the GN 607 / GN 607.1 indexing plungers of the appropriate sizes. To mount, first turn the mini indexing plunger in with the knurled button. Pulling the indexing pin will release the hexagon nut which can then be tightened with an open-end spanner.
They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
In type C, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	5.64 €
Délai d'expédition minimum ：	Jour même

*Prix unitaire/configuration de base

Mini indexing plungers, covered indexing mechanism

GANTER

Mini indexing plungers GN 822 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
With Type C the knob can be turned by 30° and a notch keeps the knob in this position.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	5.24 €
Délai d'expédition minimum ：	Jour même

*Prix unitaire/configuration de base

Mini indexing plungers, covered indexing mechanism, with red knob

GANTER

Mini indexing plungers GN 822 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
With type C the knob can be turned by 30° and a notch keeps the knob in this position.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	5.24 €
Délai d'expédition minimum ：	Jour même

*Prix unitaire/configuration de base

Mini indexing plungers, open indexing mechanism, with red knob

GANTER

Mini indexing plungers GN 822.1 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
Type C with rest position is used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	5.26 €
Délai d'expédition minimum ：	Jour même

*Prix unitaire/configuration de base

Mini indexing plungers, Stainless Steel / Plastic knob

GANTER

Mini indexing plungers GN 822.7 are distinguished for their small dimensions.
Based on the principle of the mini indexing plungers GN 822, this model combines their clever type of construction with a complete series of all current sizes of bolts and threads. They provide a reasonably priced alternative to the GN 607 / GN 607.1 indexing plungers of the appropriate sizes. To mount, first turn the mini indexing plunger in with the knurled button. Pulling the indexing pin will release the hexagon nut which can then be tightened with an open-end spanner.
They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
In type C, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	6.06 €
Délai d'expédition minimum ：	Jour même

*Prix unitaire/configuration de base

Screw drivers for GN 613

GANTER

Screw drivers for GN 613

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	7.70 €
Délai d'expédition minimum ：	5 jours

*Prix unitaire/configuration de base

Spring latches with flange for surface mounting

GANTER

Spring latches GN 722.2 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.
Spring latches GN 722.2 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	13.40 €
Délai d'expédition minimum ：	Jour même

*Prix unitaire/configuration de base

Stainless Steel-Cam action indexing plungers for welding

GANTER

Stainless Steel-Cam action indexing plungers GN 612.3 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A notch keeps the plunger in this position.
The square body can therefore be welded in any required position. In order to prevent a change in the spring load by the transferred heat we recommend spot welding the plunger body.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	23.98 €
Délai d'expédition minimum ：	5 jours

*Prix unitaire/configuration de base

Stainless Steel-Cam action indexing plungers, without locking function

GANTER

For GN 721.5 Stainless Steel-Cam action indexing plungers the indexing plunger pin is withdrawn by turning the lock by 180°.
When the cam action indexing plungers are positioned symmetrically, the left or right handed types allow for a practical, i.e. equal, direction setting of the lock.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	21.66 €
Délai d'expédition minimum ：	Jour même

*Prix unitaire/configuration de base

Stainless Steel-Indexing plungers / Plastic knob

GANTER

Stainless Steel-Indexing plungers GN 817 with rest position (Type C / CK) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	11.84 €
Délai d'expédition minimum ：	Jour même

*Prix unitaire/configuration de base

Stainless Steel-Indexing plungers with red knob

GANTER

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	11.84 €
Délai d'expédition minimum ：	Jour même

*Prix unitaire/configuration de base

Stainless Steel-Indexing plungers, with lifting ring / with wire loop, without r

GANTER

GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	4.24 €
Délai d'expédition minimum ：	Jour même

*Prix unitaire/configuration de base

Stainless Steel-Mini indexing plungers, with and without rest position

GANTER

Stainless Steel-Mini indexing plungers GN 822.9 are distinguished for their small dimensions. They are mounted by countersunk screws.
The Stainless Steel-Mini indexing plungers present an affordable alternative to the GN 608.5 and GN 608.6 Stainless Steel-Indexing plungers.
In types C and CN, the button can be turned by 30° after retracting the indexing pin, holding it in the "retraced" position using the indexing lock.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	13.78 €
Délai d'expédition minimum ：	Jour même

*Prix unitaire/configuration de base

Stainless Steel-Spring latches for welding

GANTER

Stainless Steel-Spring latches GN 722.1 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.
The square bar allows the latch to be welded in any desired position. To prevent excessive heating up and the resulting change in the spring properties, fixing with welding spots is recommended.
Stainless Steel-Spring latches GN 722.1 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.

Remise sur volume

Fichiers CAD 2D / 3D disponibles

à partir de^∗ ：	26.54 €
Délai d'expédition minimum ：	5 jours

*Prix unitaire/configuration de base

Doigts d’indexage, montage sur bride, 90°

GANTER

Remise sur volume

à partir de^∗ ：	20.00 €
Délai d'expédition minimum ：	9 jours

*Prix unitaire/configuration de base

Doigts d’indexage en acier inoxydable avec bouton rouge

GANTER

Remise sur volume

à partir de^∗ ：	79.10 €
Délai d'expédition minimum ：	7 jours

*Prix unitaire/configuration de base

Doigts d’indexage en acier inoxydable, version hygiénique côté broche (hygiène complète)

GANTER

Remise sur volume

à partir de^∗ ：	101.94 €
Délai d'expédition minimum ：	7 jours

*Prix unitaire/configuration de base

Doigts d’indexage, acier

GANTER

Remise sur volume

à partir de^∗ ：	16.48 €
Délai d'expédition minimum ：	9 jours

*Prix unitaire/configuration de base

Loquets à ressort à souder

GANTER

Remise sur volume

à partir de^∗ ：	11.96 €
Délai d'expédition minimum ：	9 jours

*Prix unitaire/configuration de base

Loquets à ressort en acier inoxydable à souder

GANTER

Remise sur volume

à partir de^∗ ：	24.26 €
Délai d'expédition minimum ：	9 jours

*Prix unitaire/configuration de base

Doigts d’indexage en acier inoxydable, amovibles

GANTER

Remise sur volume

à partir de^∗ ：	26.08 €
Délai d'expédition minimum ：	9 jours

*Prix unitaire/configuration de base


Marque
Série du produit
CAD
à partir de^∗
Délai d'expédition minimum ：
Type
Mécanisme de verrouillage
Méthode de montage
Longueur totale
Matériau du corps
Tout inoxydable
Matériau de l'embout
D.E. du corps / filetage M(mm)
Course S(mm)
Traitement de surface d'embout
Traitement thermique de l'embout
D.E. de l'embout d(Ø)
Longueur L(mm)


Marque	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER
Série du produit	Indexing plungers with rest position, Stainless Steel / Plastic knob	Indexing plungers with rest position, Steel / Plastic knob	Indexing plungers without thread, Steel / Plastic knob	Indexing plungers, Plunger Stainless Steel	Indexing plungers, removable	Indexing plungers, Stainless Steel / plastic knob	Indexing plungers, Stainless Steel / Plastic-knob	Indexing plungers, Stainless Steel / Plastic-knob	Indexing plungers, Stainless Steel, with knob, with and without rest position	Indexing plungers, Steel	Indexing plungers, Steel / long Plastic-knob	Indexing plungers, Steel / Plastic-knob	Indexing plungers, Steel / Plastic-knob	Indexing plungers, Steel / Plastic-knob	Indexing plungers, Steel, with knob, with and without rest position	Indexing plungers, Steel, with lifting ring / with wire loop, without rest posit	Indexing plungers, Steel, with red knob	Indexing plungers, with rest position, Plunger Stainless Steel	Key for locking plungers	Key for locking plungers	Locking plungers, PUSH-PUSH locking mechanism	Mini indexing plungers Zinc die casting / Plastic-knob	Mini indexing plungers, covered indexing mechanism	Mini indexing plungers, covered indexing mechanism	Mini indexing plungers, covered indexing mechanism, with red knob	Mini indexing plungers, open indexing mechanism, with red knob	Mini indexing plungers, Stainless Steel / Plastic knob	Screw drivers for GN 613	Spring latches with flange for surface mounting	Stainless Steel-Cam action indexing plungers for welding	Stainless Steel-Cam action indexing plungers, without locking function	Stainless Steel-Indexing plungers / Plastic knob	Stainless Steel-Indexing plungers with red knob	Stainless Steel-Indexing plungers, with lifting ring / with wire loop, without r	Stainless Steel-Mini indexing plungers, with and without rest position	Stainless Steel-Spring latches for welding	Doigts d’indexage, montage sur bride, 90°	Doigts d’indexage en acier inoxydable avec bouton rouge	Doigts d’indexage en acier inoxydable, version hygiénique côté broche (hygiène complète)	Doigts d’indexage, acier	Loquets à ressort à souder	Loquets à ressort en acier inoxydable à souder	Doigts d’indexage en acier inoxydable, amovibles
CAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
à partir de^∗	14.60 € *Prix unitaire/configuration de base Remise sur volume	9.98 € *Prix unitaire/configuration de base Remise sur volume	7.94 € *Prix unitaire/configuration de base Remise sur volume	11.06 € *Prix unitaire/configuration de base Remise sur volume	14.36 € *Prix unitaire/configuration de base Remise sur volume	10.86 € *Prix unitaire/configuration de base Remise sur volume	22.44 € *Prix unitaire/configuration de base Remise sur volume	14.80 € *Prix unitaire/configuration de base Remise sur volume	5.40 € *Prix unitaire/configuration de base Remise sur volume	6.34 € *Prix unitaire/configuration de base Remise sur volume	9.16 € *Prix unitaire/configuration de base Remise sur volume	12.64 € *Prix unitaire/configuration de base Remise sur volume	9.86 € *Prix unitaire/configuration de base Remise sur volume	9.86 € *Prix unitaire/configuration de base Remise sur volume	4.76 € *Prix unitaire/configuration de base Remise sur volume	4.04 € *Prix unitaire/configuration de base Remise sur volume	7.34 € *Prix unitaire/configuration de base Remise sur volume	11.46 € *Prix unitaire/configuration de base Remise sur volume	1.58 € *Prix unitaire/configuration de base Remise sur volume	7.50 € *Prix unitaire/configuration de base Remise sur volume	14.84 € *Prix unitaire/configuration de base Remise sur volume	5.74 € *Prix unitaire/configuration de base Remise sur volume	5.64 € *Prix unitaire/configuration de base Remise sur volume	5.24 € *Prix unitaire/configuration de base Remise sur volume	5.24 € *Prix unitaire/configuration de base Remise sur volume	5.26 € *Prix unitaire/configuration de base Remise sur volume	6.06 € *Prix unitaire/configuration de base Remise sur volume	7.70 € *Prix unitaire/configuration de base Remise sur volume	13.40 € *Prix unitaire/configuration de base Remise sur volume	23.98 € *Prix unitaire/configuration de base Remise sur volume	21.66 € *Prix unitaire/configuration de base Remise sur volume	11.84 € *Prix unitaire/configuration de base Remise sur volume	11.84 € *Prix unitaire/configuration de base Remise sur volume	4.24 € *Prix unitaire/configuration de base Remise sur volume	13.78 € *Prix unitaire/configuration de base Remise sur volume	26.54 € *Prix unitaire/configuration de base Remise sur volume	20.00 € *Prix unitaire/configuration de base Remise sur volume	79.10 € *Prix unitaire/configuration de base Remise sur volume	101.94 € *Prix unitaire/configuration de base Remise sur volume	16.48 € *Prix unitaire/configuration de base Remise sur volume	11.96 € *Prix unitaire/configuration de base Remise sur volume	24.26 € *Prix unitaire/configuration de base Remise sur volume	26.08 € *Prix unitaire/configuration de base Remise sur volume
Délai d'expédition minimum ：	Jour même	Jour même	Jour même	Jour même	4 jours	Jour même	Jour même	Jour même	Jour même	Jour même	Jour même	Jour même	Jour même	5 jours	Jour même	Jour même	Jour même	5 jours	4 jours	5 jours	Jour même	Jour même	Jour même	Jour même	Jour même	Jour même	Jour même	5 jours	Jour même	5 jours	Jour même	Jour même	Jour même	Jour même	Jour même	5 jours	9 jours	7 jours	7 jours	9 jours	9 jours	9 jours	9 jours
Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Mécanisme de verrouillage	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Méthode de montage	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Longueur totale	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Matériau du corps	Acier inoxydable	-	-	-	-	Acier inoxydable	Acier inoxydable	Acier inoxydable	Acier inoxydable	Acier	-	Acier	Acier	-	Acier	Acier	-	-	-	-	-	-	-	Acier / Acier inoxydable	Acier / Acier inoxydable	Acier / Acier inoxydable	-	-	Acier inoxydable	Acier inoxydable	-	Acier inoxydable	Acier inoxydable	Acier inoxydable	-	Acier inoxydable	-	-	-	-	-	-	-
Tout inoxydable	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Matériau de l'embout	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
D.E. du corps / filetage M(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Course S(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Traitement de surface d'embout	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Traitement thermique de l'embout	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
D.E. de l'embout d(Ø)	5 ～ 10	5 ～ 10	5 ～ 8	6 ～ 8	7 ～ 10	5 ～ 10	6 ～ 8	6 ～ 8	3 ～ 10	4 ～ 10	4 ～ 12	6 ～ 8	6 ～ 8	6 ～ 10	3 ～ 10	3 ～ 10	4 ～ 16	6 ～ 8	-	-	6 ～ 8	4 ～ 10	4 ～ 10	4 ～ 7	4 ～ 7	4 ～ 7	4 ～ 10	-	8 ～ 14	-	5 ～ 10	4 ～ 16	4 ～ 16	3 ～ 10	4 ～ 10	-	-	-	-	-	-	-	-
Longueur L(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Filtrer par:

Stock

- Stock Items Included
Réinitialiser

Affiner la recherche en précisant les spéc./dim.

Mécanisme de verrouillage
- Non fourni
- Avec verrouillage
- Sans verrouillage
Images

Réinitialiser

Méthode de montage
- À visser
- Ajustement forcé
- Montage par boulon
- Autres
- Embase
Réinitialiser

Longueur totale
- Standard
- Court
Réinitialiser

Matériau du corps
- Acier
- Acier inoxydable
- Zinc moulé sous pression
- Autres
Réinitialiser

Tout inoxydable
- Applicable
- Non conforme
Réinitialiser

Matériau de l'embout
- Acier
- Acier inoxydable
Réinitialiser

D.E. du corps / filetage M(mm)
3

5

6

8

10

12

14

16

18

20
Dessin

Réinitialiser

Course S(mm)
3.5

4

5

5-9

6

6-10

7

7.5

8

9

9.5

10

12

14

15

16

18

19

24

25
Dessin

Réinitialiser

Traitement de surface d'embout
- Non fourni
- Revêtement oxydé noir
- Chrome trivalent
- Placage autocatalytique au nickel
- Placage nickel
Réinitialiser

Traitement thermique de l'embout
- Non fourni
- Trempé
- Carburé
Réinitialiser

D.E. de l'embout d(Ø)
2

2.5

3

4

5

6

7

7.1

8

M8 x 1

8.28

10

M10 x 1

11.52

12

M12 x 1,5

14

15.49

16

M16 x 1,5

18

19.7

20

M20 x 1,5

22

25

30

60

80
Dessin

Réinitialiser

Longueur L(mm)
25

26.5

30

30.5

31

32

33

34

34.5

35

36

37

37.5

38

39

40

40.5

41

42

42.5

43

43.5

44

44.5

45

46

47

47.5

48

49

50

51

52

53

54

54.5

56

56.5

57

57.25

57.5

58

58.5

59

59.5

60.5

61

62

63

63.5

64.5

65

66

68

68.5

69

70

70.5

71

73

74

75

75.5

77

79

80

80.5

82

83

84

85

91

92

99.9

123
Dessin

Réinitialiser

Affiner la recherche en spécifiant le fabricant

- MISUMI (19)
- Produits compétitifs ()
- KIPP (98)
- GANTER (88)
- HALDER (37)
- NABEYA BI-TECH (25)
- KONISHI MFG (19)
- ELESA (4)
- NABEYA (1)
- TOSHIN CASTER (1)
Réinitialiser

Affiner la recherche en précisant le type de données CAO

- 2D
- 3D
Réinitialiser

Affiner la recherche en précisant le délai

Tous les articles

Jour même

2 jours ou moins

3 jours ou moins

4 jours ou moins

5 jours ou moins

6 jours ou moins

7 jours ou moins

8 jours ou moins

9 jours ou moins

10 jours ou moins
Réinitialiser