GANTER Poignées de rotation, manivelles à main

?* À propos du délai d'expédition et des prix

• 

  Crank Handles, Stainless Steel

  GANTER

  Stainless Steel-Cranked handles GN 269 have been designed to comply with stringent hygiene requirements.
  The cylindrical handles are made of thermoset material which in general provides good stability when exposed to chemicals.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	79.98 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Crank Handles, Stainless Steel

  GANTER

  Stainless Steel-Cranked handles GN 269 have been designed to comply with stringent hygiene requirements.
  The cylindrical handles are made of thermoset material which in general provides good stability when exposed to chemicals.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	34.08 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Cranked handles, Cast iron

  GANTER

  The hub bores d1 H7 are not provided for in the official standard sheet.

  • Remise sur volume

  à partir de∗ ：	19.70 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Cranked handles, Aluminium

  GANTER

  Cranked handles, Aluminium

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	18.24 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Indexing cranked handles, Cast iron

  GANTER

  Indexing cranked handles GN 558 are for positioning mechanisms.
  Standard machine elements for positioning of spindles:

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	66.12 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Cranked handles with retractable handle, Aluminium

  GANTER

  The handpiece of the cranked handle GN 471.3 is locked in a tapered bore in the operating position.
  For tilting, the handle must first be pulled out of the taper in axial direction.
  A compression spring holds the handle in both end positions. When folded out, it automatically re-engages.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	38.34 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Cranked handles, Zinc die casting

  GANTER

  Cranked handles, Zinc die casting

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	11.08 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Handwheels with retractable handle

  GANTER

  The handle in the handwheels GN 322.3 is locked in a conical bore in the operating position.
  For reversal, it must first be pulled from the cone in axial direction. A pressure spring holds the handle in both positions. When swung out, it automatically engages again.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	53.52 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Handwheels with retractable handle, Safety rectractable

  GANTER

  Handwheels GN 322.7 are suitable for applications where the handle must not remain in the operating position. In order to bring the handle into this position it has to be turned first through 90° to a stop against a torsion spring and then it is pushed against spring pressure into its hold position.
  By maintaining the forward thrust on the handle the handwheel can easily be rotated. When releasing the handle the springs returns it back to the retracted position.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	70.32 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Handwheels, Stainless Steel

  GANTER

  The design of Stainless Steel-Handwheels GN 949 complies with the requirements of hygiene standards.
  The revolving handles are made of Duroplast which, in general, provides good resistance to the impact of chemical agents.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	34.30 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Bull´s eye levels

  GANTER

  Bull´s eye levels GN 2278 are used to check the horizontal position of jigs, machines, devices, appliances and instruments.
  The housing is grooved at its lower diameter d3, making it easier to mount in place, e.g. by gluing.
  The spirit levels are aligned in relation to the reference or contact surface, so that the bubble is located inside the marking ring once the horizontal position of the contact surface is reached.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	11.70 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Control handles, Zinc-die casting

  GANTER

  Control handles GN 112.1 allow fine adjustment.
  They are connected to a shaft by means of a cross pin. To simplify the installation there is a centred drilling on both sides.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	12.56 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Control handwheels with standard scale

  GANTER

  Control handwheels GN 736.1 are used for setting operations with low torque. Coarse setting is made by means of the cylindrical handle (fingertip grip) followed by fine setting using the knurled rim of the handwheel.
  The model fitted with collet offers an absolutely reliable mounting on the shaft and at the same time allows an easy setting of the adjustable scale ring wheel. The scale is wear resistant and easily legible since the engraved alu coloured numbers contrast with the black anodized surface. Besides the standard scale (Coding S) the control handwheels can be supplied with any type of graduation.
  Full details of the available graduations, numbering sequence, number position and type of scale see under "How to order - Graduations".
  Prices for scales on request!

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	29.62 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Control handwheels, Aluminium

  GANTER

  Control handwheels GN 736 are used for setting operations with low torque.
  Coarse setting is made by means of the cylindrical handle (fingertip grip) followed by fine setting using the knurled rim of the handwheel.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	16.88 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Control handwheels, with deposition for scale

  GANTER

  Control handwheels GN 736.1 are used for setting operations with low torque. Coarse setting is made by means of the cylindrical handle (fingertip grip) followed by fine setting using the knurled rim of the knob.
  The model fitted with collet offers an absolutely reliable mounting on the shaft and at the same time allows an easy setting of the adjustable scale ring wheel. The scale is wear resistant and easily legible since the engraved alu coloured numbers contrast with the black anodized surface. Besides the standard scale (Coding S) the control handwheels can be supplied with any type of graduation.
  Full details of the available graduations, numbering sequence, number position and type of scale see under "How to order - Graduations".
  Prices for scales on request!

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	16.46 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Cranked handles with retractable handle, Aluminium

  GANTER

  The handpiece of the cranked handle GN 472.3 is locked in a tapered bore in the operating position.
  For tilting, the handle must first be pulled out of the taper in axial direction.
  A compression spring holds the handle in both end positions. When folded out, it automatically re-engages.
  

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	34.00 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Cranked handles with retractable handle, Aluminium

  GANTER

  The handpiece of the cranked handle GN 472.5 is locked in a tapered bore in the operating position.
  For tilting, the handle must first be pulled out of the taper in axial direction.
  A compression spring holds the handle in both end positions. When folded out, it automatically re-engages.

  • Remise sur volume

  à partir de∗ ：	51.24 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Disc handwheels

  GANTER

  Disc handwheels GN 321 have recessed grips at their back.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	20.24 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Disc handwheels

  GANTER

  Disc handwheels GN 323 have recessed grips at their back.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	17.42 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Disc handwheels, Aluminium

  GANTER

  Disc handwheels DIN 3670 have recessed grips at their back. As a rule they are supplied without handle, but the mounting of a handle is possible.
  The handwheel diameter d1=80 and d1=400 are not provided in the official standard sheet.

  • Remise sur volume

  à partir de∗ ：	19.02 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Disc handwheels, Aluminium, plastic coated

  GANTER

  Disc handwheels GN 923 are distinguished by modern design.
  
  The removable plastic cover shrouds the fixing components such as screws, countersunk washers as well as the shaft end.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	18.24 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Handwheels with retractable handle, Handle locked

  GANTER

  The handle in these handwheels is locked in a conical bore in the operating position. For reversal, it must first be pulled from the cone in axial direction.
  
  A pressure spring holds the handle in both positions. When swung out, it automatically engages again.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	40.02 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Handwheels with retractable handle, Safety rectractable

  GANTER

  Retractable handwheels GN 923.7 are distinguished by modern design.
  
  These andwheels are suitable for applications where the handle must not remain in the operating position.
  
  In order to bring the handle into this position it has to be turned first through 90° to a stop against a torsion spring and then it is pushed against spring pressure into its hold position. By maintaining the forward thrust on the handle the handwheel can easily be rotated.
  
  When releasing the handle the springs returns it back to the retracted position.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	61.22 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Handwheels with retractable handle, Safety rectractable

  GANTER

  Retractable handwheels GN 924.7 are distinguished by modern design.
  
  These handwheels are suitable for applications where the handle must not remain in the operating position.
  
  In order to bring the handle into this position it has to be turned first through 90° to a stop against a torsion spring and then it is pushed against spring pressure into its hold position. By maintaining the forward thrust on the handle the handwheel can easily be rotated.
  
  When releasing the handle the springs returns it back to the retracted position.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	61.58 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Handwheels, matt, black plastic coated

  GANTER

  Handwheels, matt, black plastic coated

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	26.32 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Handwheels, pressed Stainless Steel, AISI 304 (A2)

  GANTER

  The hub lengths of the pressed Stainless Steel-Handwheels GN 227.2 conform to DIN 950.
  Stainless Steel-Handwheels GN 227.2 are renowned for their high mechanical strength. They are not affected by shock and knocks.
  
  

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	74.02 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Handwheels, Stainless Steel

  GANTER

  The dimensions of the Stainless Steel-Handwheels GN 950.6 comply extensively with Handwheels DIN 950.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	61.40 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Handwheels, with large hub, Cast iron

  GANTER

  Handwheels GN 950.1 differ from normal handwheels DIN 950 only by the larger hub.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	34.70 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Pressed steel handwheels

  GANTER

  The hub lengths of the pressed steel handwheels GN 227.1 conform to DIN 950.
  Pressed steel handwheels GN 227.1 are renowned for their high mechanical strength. They are not affected by shock and knocks.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	20.10 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Safety handwheels with friction bearing

  GANTER

  The use of coupling attachments in handwheels other than specified is also possible.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	118.04 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Safety handwheels with needle bearing

  GANTER

  The use of coupling attachments in handwheels other than specified is also possible.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	157.72 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Safety handwheels, Aluminium

  GANTER

  The hub cap protects the bearing from the ingress of dust and at the same time acts as a shroud for the mounting components.
  The wheel hub is fitted with an inside groove to retain the hub cap on its segmented edge.
  The hub cap is pushed into position by hand and it can be removed by levering it away at the relieved point with a screw driver.
  The needle bearings are greased on assembly which should be ample for permanent lubrication.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	150.96 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Safety handwheels, fixed fearing flange

  GANTER

  GN 327 safety handwheels feature the ultimate in health and safety at work standards because the handwheel, if disengaged, is mounted on a fixed component, the bearing flange. The wheel is fully disengaged from the rotating shaft.
  The bearing flange can also accept the bearing of the shaft via the bearing bushing (code No. 1). This bearing bushing is a dry bearing (DU bushing). Normally, the shaft has a separate bearing and the bearing bushing serves to center the bearing flange.
  Centering can also be effected by a centering ring (code No. 2) if the appropriate bore hole has been made at the machine side. In this case there is no need for the bearing bushes and no bearing friction (heating) will occur.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	315.50 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Spoked handwheels, Aluminium, Cast iron

  GANTER

  Handwheels DIN 950 in cast iron are supplied with handles made of zinc plated steel. In aluminum they are supplied with handles made of plastic (Type D) and made of zinc plated steel (Type F).
  The official standard sheet only provides for types A (without handle) and G (without handle, but with thread d4), also without the handwheel diameter d1 = 180.

  • Remise sur volume

  à partir de∗ ：	19.40 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Spoked handwheels, Aluminium, plastic coated

  GANTER

  Spoked handwheels GN 924 are distinguished by modern design.
  
  The removable plastic cover shrouds the fixing components such as screws, countersunk washers as well as the shaft end.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	23.08 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Spoked handwheels, blank, rim polished

  GANTER

  Spoked handwheels, blank, rim polished

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	29.70 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Tri-ball handles, Steel

  GANTER

  Tri-ball handles GN 10 allow fine adjustment.
  An alternative in modern design are cranked handles GN 510 and control handles GN 112.1.
  

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	20.98 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Volants en acier inoxydable, A4

  GANTER

  • Remise sur volume

  à partir de∗ ：	19.72 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Volants en acier embouti, pour vannes

  GANTER

  • Remise sur volume

  à partir de∗ ：	0.94 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Volants en tôle acier

  GANTER

  • Remise sur volume

  à partir de∗ ：	11.04 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

Loading...