HIROSE ELECTRONIC Connecteurs carrés（Wire connection method：Type soudé）
| Nombre de jours d'expédition |
|
|---|
?* À propos du délai d'expédition et des prix
-
Connecteur d'interface carré, pas de 1.78mm, série QM
HIROSE ELECTRONIC
Terminal opening and connection portion both possess a 1.78-mm pitch grid array, small size, and high density. Terminals are constructed with a ribbon shape, making them strong against prying and ensured for 1,000 insertions and extractions.
[Features]
· Terminal opening and connection portion both possess a 1.78-mm pitch grid array for use with small electric devices.
· Terminals are constructed with a ribbon shape, making them strong against prying and ensured frequent insertions and extractions.
· Able to be press welded when bunched with 0.89-mm (.35°) pitch cable (No.30 AWG) in an attempt to reduce work effort.
· The dip connector, along with a construction that allows the grounding of electrical interference waves arising from the cable and connector on the circuit board surface, includes a circuit board snap stop.
· The cover case is made of a die cast zinc amalgam effective in blocking electromagnetic waves, and a receptacle side bracket is included for effective noise reduction.
· There are two types of cover case: hood type and lock (bevel opening) type. The lock type allows for single-action operation.- Remise sur volume
à partir de∗ ： 6.12 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Connecteur D-Sub (type de connexion à souder) - série HD
HIROSE ELECTRONIC
A solder connection type D-sub connector. Terminal connection portion has a solder cup for the easy attachment of every cable type.
[Features]
· Small and lightweight connector due to metal shell.
· The solder attachment side has a solder cup construction for easy soldering. It is also optimal for wires up to a maximum size of AWG#20.
· The insulation material is heat/chemical resistant and uses the excellent PBT resin (UL94V-O) containing glass.
· CTF, CTH, and other plug case types can be used. Straight dip (SD type), right angle dip (RD type), and ribbon pressure (FD type) connections can be used.- Remise sur volume
à partir de∗ ： 3.11 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Connecteur circuit imprimé à câble (pas de 1mm) avec prise en charge de LVDS - série FX15
HIROSE ELECTRONIC
A shielded connector supporting LVDS transmission. A common board connector that can be selected with a discrete cable, a thin coaxial cable, or a shielded FCC.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.- Remise sur volume
à partir de∗ ： 2.29 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Connecteur compatible DeviceNet, série HR31
HIROSE ELECTRONIC
These are DeviceNet standard compliant connectors. These connectors simplify connection, reduce plug connector size, and promote differentiation compared to conventional parts.
[Features]
· DeviceNet compliant: The HR31 series is a FA network device standards product. (Terminal contacts: Gold-plated)
· Screw-lock: All screw-lock equipped products can be securely locked, allowing for increased locking strength.
· Snap-lock: The snap-lock feature creates a tactile click when mating.
· Commercially available tools can be used: These connectors are designed to be used with crimp tools conforming to JIS C 9711 standards.
· Designed to allow for removal by ⌀1 mm pin when improperly wired.
· Protected contacts: The crimped contacts are protected by the plug housing, reducing damage to the contacts during connection.- Remise sur volume
à partir de∗ ： 5.31 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Connecteur d'E / S demi-pas (pour servo-amplificateurs Fanuc), série FI
HIROSE ELECTRONIC
This is a Fanuc CNC and servo I/O connector. Selectable between press-weld connections and solder connections.
[Features]
・Terminal device is effectively made smaller with the 1.27 mm connector space pitch.
・Aversion to prying and soft insertion/extraction is achieved with a ribbon-type terminal construction.
・The case is split in the center of the cable guide opening and integrated with 4 fixing hooks for easy work.
・ The lock mechanism utilizes a single-action lock format for easy attachment and detachment.
・In addition to the easy-to-use pressure-type connection, there is also a solder type for making connections with every other type of wire.- Remise sur volume
à partir de∗ ： 5.68 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Connecteur d'interface rectangulaire, petit format, à longue durée de vie, série 3500
HIROSE ELECTRONIC
This small interface connector includes a lock, and has excellent performance, holding up for 20,000 insertion and removal cycles in testing.
[Features]
• This connector has a long service life and can be inserted and removed up to 20,000 times.
• The terminal structure has high reliability, and is a 2-point contact bellows type.
• In response to forceful pulling on the lock, the unit unlocks utilizing the "snap lock method." This makes the connector resistant to damage from outside forces pulling on the cable unexpectedly.
• By pushing the button on the left or right side of the plug, you can easily unlock the cable, and because there's an audible "clicking" sound when the cable locks in place, you can be absolutely sure that it is locked.
• Small and lightweight (the 16-core receptacle is approximately 2 g), effective for size and reduction of terminal equipment.
• The new boxes and metal shell bending structure utilized function as EMI measures, and the connector itself is durable.
• Just push a button and EDS measures are complete through the utilization of an over-molded plug cover.
• The circuit board implementation method uses a 0.8-mm pitch row with the SMT method, so implementation is easy.
• Conforms to circuit board with t values of 0.81 to 1.6 mm, giving users an extensive selection of circuit boards.
• Two types of wire connection methods on the plug side are available. One is a pressure welded type for wire connection labor reduction, and the other is a solder type with arbitrary cable type selection available.- Remise sur volume
à partir de∗ ： 5.57 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Connecteur d'interface rectangulaire, petit format, série 3200
HIROSE ELECTRONIC
This is an interface connector with an implementation height of 2.9 mm, a low profile, small size, and a lock included.
[Features]
• A receptacle connector board implementation surface with a height of the 2.9 mm.
• The contact pitch is an incredibly small 0.8 mm, and only a small area is required for mounting.
• This circuit board implementation method has a pitch of just 0.8 mm using the SMT method, so implementation is easy.
• This receptacle connector can also be prepared in an embossed packaging product format.
• This receptacle connector has a metal shell structure used for the mold cover, providing the ideal protective measures for ESD.
• A latch lock is applied to both sides for mating processes.
• This lock is implemented with the minimum space possible, and helps downsize your product set.
• Choose from 0.5, 1, or 1.5 mm for the circuit board thickness and support fittings length.
• The wire connection of this plug connector use a solder attachment type applicable to all types of wires.
• The number of pins available is either 8 or 10.- Remise sur volume
à partir de∗ ： 2.24 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Connecteur carré multibroche (SUMICON) série 1600
HIROSE ELECTRONIC
The SUMICON 1600 series of rectangular multi-pin connectors are built using an original Hirose Electric design. These connectors can be used for a variety of different applications based on the combination of connector unit and case employed.
[Features]
· The same nine versions that are available in the 1300 series are available here, with the numbers of pins equal to 8, 12, 16, 20, 24, 28, 34, 45, or 60.
· Connector units are available in soldering, wrapping, or crimping types.
· Available accessories include C cases, CA cases, CBA cases, ST stoppers, STA stoppers, STB stoppers, and others. Combining connectors with these accessories opens up a wide range of possible applications.- Remise sur volume
à partir de∗ ： 1.66 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Connecteur d'interface rectangulaire, profil ultra-bas - série LX
HIROSE ELECTRONIC
An ultra-low-profile interface connector with a mounting height of 2.0 mm. While being ultra low-profile, provides toughness and excellent contact reliability, contributing to the slimming of devices.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.- Remise sur volume
à partir de∗ ： 2.23 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
| Marque |
|---|
| Série du produit |
| à partir de∗ |
| Délai d'expédition minimum ： |
| Connector Shape |
| A· B· C |
| D· E· F |
| G·H·I |
| J·K·L |
| M·N·O |
| P· Q· R |
| S· T· U |
| Number |
| Applicable pin/contact |
| Number Of Cores |
| Application |
| Allowable Current(A) |
| Allowable Voltage(V) |
| Wire connection method |
| Connection direction |
| Protection function (environmentally resistant) |
| Representative Standard |
|
|
|
|
|
|
|
|
| |
| Marque | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC |
| Série du produit | Connecteur circuit imprimé à câble (pas de 1mm) avec prise en charge de LVDS - série FX15 | Connecteur d'E / S demi-pas (pour servo-amplificateurs Fanuc), série FI | Connecteur d'interface rectangulaire, petit format, à longue durée de vie, série 3500 | Connecteur d'interface rectangulaire, petit format, série 3200 | Connecteur d'interface rectangulaire, profil ultra-bas - série LX | ||||
| à partir de∗ | 6.12 € *Prix unitaire/configuration de base Remise sur volume | 3.11 € *Prix unitaire/configuration de base Remise sur volume | 2.29 € *Prix unitaire/configuration de base Remise sur volume | 5.31 € *Prix unitaire/configuration de base Remise sur volume | 5.68 € *Prix unitaire/configuration de base Remise sur volume | 5.57 € *Prix unitaire/configuration de base Remise sur volume | 2.24 € *Prix unitaire/configuration de base Remise sur volume | 1.66 € *Prix unitaire/configuration de base Remise sur volume | 2.23 € *Prix unitaire/configuration de base Remise sur volume |
| Délai d'expédition minimum ： | 5 jours | Jour même | 5 jours | 5 jours | 6 jours | 5 jours | 5 jours | Jour même | 5 jours |
| Connector Shape | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée |
| A· B· C | - | - | - | - | - | - | - | - | - |
| D· E· F | - | Dsub | Autre | - | Autre | - | - | - | - |
| G·H·I | - | Autre | - | Autre | - | - | - | - | - |
| J·K·L | - | - | - | - | - | - | - | - | Autre |
| M·N·O | - | - | - | - | - | - | - | - | - |
| P· Q· R | Autre | - | - | - | - | - | - | - | - |
| S· T· U | - | - | - | - | - | - | - | - | - |
| Number | - | - | - | - | - | Autre | Autre | Autre | - |
| Applicable pin/contact | Mâle (fiche) | Mâle (fiche) / Femelle (prise) | Mâle (fiche) | Mâle (fiche) | Femelle (prise) | Femelle (prise) | Mâle (fiche) | Mâle (fiche) / Femelle (prise) | Mâle (fiche) |
| Number Of Cores | 26 | 9 ～ 50 | 41 | 5 | 15 ～ 20 | 10 | 8 ～ 10 | 8 ～ 60 | 12 |
| Application | Connexion de câble | Connexion de câble | Connexion de câble | Pour PCB | Connexion de câble | Connexion de câble | Connexion de câble | Connexion de câble | Connexion de câble |
| Allowable Current(A) | 0.5 | 3 | 0.5 | 12 | 1 | 1 | 0.5 | 3 | 0.5 |
| Allowable Voltage(V) | CA100 | AC400 | CA100 | CA 250 ～ CC 350 | CA250 | CA125 | CA125 | AC300 | AC50 |
| Wire connection method | Type soudé | Type soudé | Type soudé | Type soudé | Type soudé | Type soudé | Type soudé | Type soudé | Type soudé |
| Connection direction | Droit | Droit | Droit | Droit | Droit | Droit | Droit | Droit | Droit |
| Protection function (environmentally resistant) | - | - | - | - | - | - | - | - | - |
| Representative Standard | - | - | - | - | - | - | - | - | - |
Loading...
Filtrer par:
Stock
-
- Stock Items Included
Affiner la recherche en précisant les spéc./dim.
-
Connector Shape
- Forme carrée
- Autre
-
A· B· C
- Autre
-
D· E· F
- Dsub
- FCN
- Autre
-
G·H·I
- Usage intensif
- Autre
-
J·K·L
- Autre
-
M·N·O
- MR
- MIL
- Autre
-
P· Q· R
- Autre
-
S· T· U
- Autre
-
Number
- Autre
-
Applicable pin/contact
- Mâle (fiche)
- Femelle (prise)
- Utilisation combinée mâle / femelle
- Autre
-
Number Of Cores
-
Application
-
Allowable Current(A)
-
Allowable Voltage(V)
- 5
- DC 12
- 12VCC-230VCA
- 17.5
- 24
- CA 30
- 50
- AC50
- 72
- 100
- CA100
- CA120
- 125
- CA125
- CA 125
- 150
- AC150
- 160
- CA200
- 230/400
- 250
- CA250
- CA 250
- 300
- AC300
- CA 300
- 320
- 350CA
- CC 350
- 400
- AC400
- 400/400V (Leistungs-/Steuerungsbereich)
- 400/690
- 400/690V (Leiter-Erde/Leiter-Leiter)
- 400/690V (Leiter-Erde/Leiter/Leiter)
- 500
- CA500
- CA / CC 500
- 550
- 600
- CA 600
- 630
- 690
- 690/160V (Leistungs-/Steuerungsbereich)
- 830
- 830/400V (Leistungs-/Steuerungsbereich)
- 1000
- 1550
- CA / CC 3000
- 3100
-
Wire connection method
- Type soudé
- Serti
- Soudage par pression
- Fixation avec vis
- Autre
-
Connection direction
- Droit
- Angle
- Autre
-
Protection function (environmentally resistant)
-
Representative Standard
Affiner la recherche en spécifiant le fabricant
-
- MISUMI (0)
- HIROSE ELECTRONIC (9)
- HONDA TSUSHIN KOGYO (3)
- BINDER (2)
- FUJIKURA (DDK) (2)
- FUJITSU COMPONENT (1)
- KEL (1)
- MOLEX (1)
- PROVERTHA (1)
- JAPAN AVIATION ELECTRONICS(JAE) (0)
- FINDER (0)
- UNIVER (0)
- FISCHER ELEKTRONIK (0)
- IFM (0)
- LUMBERG (0)
- HELLERMANN TYTON (0)
- CONNFLY (0)
- ILME (0)
- DECA (0)
- SOURIAU (0)
- HARTING (0)
- WEIDMUELLER (0)
- EDAC (0)
- CONEC (0)
- LAPP (0)
- WAGO (0)
- PHOENIX CONTACT (0)
- ECON CONNECT (0)
- TRU COMPONENTS (0)
- HIRSCHMANN (0)
- TE CONNECTIVITY (0)
- ASSMANN WSW (0)
- VOGT VERBINDUNGSTECHNIK (0)
- OMRON (0)
- MH CONNECTORS (0)
- BKL ELECTRONIC (0)
Affiner la recherche en précisant le type de données CAO
-
- 2D
- 3D
Catégories relatives à « Connecteurs carrés »
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.