HIROSE ELECTRONIC Connecteurs carrés（D· E· F：Autre）

?* À propos du délai d'expédition et des prix

• 

  Connecteur circuit imprimé à câble série DF33 pour source d'alimentation interne, pas de 3.3mm【1-100 pièces par conditionnement】

  HIROSE ELECTRONIC

  It is compact and also supports up to 5 A. With its locking mechanism, mis-connection prevention structure, potting compatibility and high reliability, it is optimal for internal power supply connection in equipment.

  • Remise sur volume

  à partir de∗ ：	0.11 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur avec verrou pour source d'alimentation interne, prise en charge d'enrobage avec pas de 5mm - série DF5【1-100 pièces par conditionnement】

  HIROSE ELECTRONIC

  Connector with lock for board-to-cable connection, with 5-mm pitch. Supports 8 maximum amperes. · Supports potting, and is ideal for connecting internal power supplies in equipment.
  
  [Features]
  · Potting is supported: Enables potting up to 9 mm, and is low-profile with a mounting height of 22.5 mm.
  · Prevents incorrect insertion: A complete prevention mechanism guards against reverse entry and insertion into opposite poles during the coupling of pin headers and sockets.
  · Solder cracking protection: Glass-fiber reinforced resin is utilized for the pin header case, as a measure for protecting against solder cracking caused by thermal contraction.
  · Prevents reverse entry into board: Added guide posts on pin headers prevent reverse board entry.
  · Full lock mechanism: Equipped with an outer-lock type full-lock mechanism.
  · 8 A current rating: Can carry a maximum current of 8 Amperes.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Remise sur volume

  à partir de∗ ：	0.09 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur circuit imprimé à câble (pas de 1mm) avec prise en charge de LVDS - série FX15

  HIROSE ELECTRONIC

  A shielded connector supporting LVDS transmission. A common board connector that can be selected with a discrete cable, a thin coaxial cable, or a shielded FCC.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Remise sur volume

  à partir de∗ ：	1.48 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur d'E / S demi-pas (pour servo-amplificateurs Fanuc), série FI

  HIROSE ELECTRONIC

  This is a Fanuc CNC and servo I/O connector. Selectable between press-weld connections and solder connections.
  
  [Features]
  ・Terminal device is effectively made smaller with the 1.27 mm connector space pitch.
  ・Aversion to prying and soft insertion/extraction is achieved with a ribbon-type terminal construction.
  ・The case is split in the center of the cable guide opening and integrated with 4 fixing hooks for easy work.
  ・ The lock mechanism utilizes a single-action lock format for easy attachment and detachment.
  ・In addition to the easy-to-use pressure-type connection, there is also a solder type for making connections with every other type of wire.

  • Remise sur volume

  à partir de∗ ：	5.01 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Connecteur circuit imprimé à câble avec pas de 1.25mm - série DF13【1-10,000 pièces par conditionnement】

  HIROSE ELECTRONIC

  Connector for board-to-cable connection with 1.25-mm pitch. Choose from a number of variations from 2–40 pin, straight-mount, right-angle mount, DIP, and SMT.
  
  [Features]
  · Small.
  · A low-profile design with a mounting height of 5.8 mm. (The SMT mounting is a straight type, the DIP type is a straight 5.3-mm, and the right-angle type is 3.6-mm.)
  · Multipole
  · The dual-row type is a multipole connector with up to 40 pins. It is a high-density connector with a surface area of 30% compared to the single-row type.
  · Supports automatic mounting.
  · The header is available with a suction surface that supports vacuum suction . Therefore, automatic mounting using embossed packing is possible.
  · Complete basic functionality despite compact form factor.
  · The header includes a box structure to prevent twisting and ensure incorrect insertion is completely prevented.
  · Additionally, the Surface Mount (SMT) header is fitted with a reinforcement bracket to prevent solder from peeling.
  
  In-stock made-to-order products cannot be returned or canceled. Thank you for your understanding.

  • Remise sur volume

  à partir de∗ ：	0.14 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteur circuit imprimé à câble (pas de 1.25mm, double rangée, profil bas) - série DF14【1-100 pièces par conditionnement】

  HIROSE ELECTRONIC

  Connector for board-to-cable connection with 1.25-mm pitch. A low-profile type with a lower circuit board mounting height.
  
  [Features]
  · Thin type.
  · A dedicated right-angle connector to achieve a low-profile on top of circuit boards.
  · Circuit board mounting height: 2.5 mm.
  · This makes it possible to draw signals from places where there is no space between the circuit boards.
  · In addition, the profile of the offset type is lower than the board mounting height of 1.6 mm.
  · Supports automatic mounting.
  · The header has a vacuum absorption surface. Therefore, automatic mounting by embossed packing is possible.
  · Additionally, magazine packing is also available for the on-board type.
  · Four-walled type prevents socket from scraping the circuit board.
  · Header includes a box structure to prevent twisting to ensure incorrect insertion is completely prevented. Circuit board also includes walls to prevent damage caused by scraping when performing insertion and removal from the socket.
  · Additionally, a reinforcement bracket is included to prevent solder from peeling.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Remise sur volume

  à partir de∗ ：	0.65 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteur de câble coaxial circuit imprimé à câble / FPC / type fin (pas de 1mm) - série DF19【1-100 pièces par conditionnement】

  HIROSE ELECTRONIC

  A thin, 1-mm pitch, board-to-cable/FPC/thin coaxial cable connector. Available in a wide array of variations for circuit boards and cables.
  In-stock custom products cannot be returned or canceled. Thank you.

  • Remise sur volume

  à partir de∗ ：	0.17 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur / Connecteur carte-à-câble multipolaire à 2 rangées, pas de 1 mm, série DF20【100 pièces par conditionnement】

  HIROSE ELECTRONIC

  [Features]
  · This is a board-to-cable connector with dual-row, 1-mm pitch terminal pins.
  · Contributing to a high-density board mounting.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Remise sur volume

  à partir de∗ ：	13.76 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Connecteur / Fil de raccordement discret, série DF1E (pas de 2,5 mm)【1-100 pièces par conditionnement】

  HIROSE ELECTRONIC

  A board-to-cable, cable-to-cable connector with a lock (2.5-mm pitch). The inner locking type mechanism prevents the connector from disconnecting due to impact.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Remise sur volume

  à partir de∗ ：	0.27 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteur / Connecteur à fil de raccordement discret, série DF1B (pas de 2,5 mm)【1-10,000 pièces par conditionnement】

  HIROSE ELECTRONIC

  Connector for board-to-cable and cable-to-cable connections with 2.5-mm pitch. A wide variety of offerings, including choices in PCB mounting orientation, terminal arrangements, and terminal plating.
  
  [Features]
  · A new approach to contact pressure welding and crimping: A new type of connector where the contact-pressure-welded terminal is inserted into the casing.
  · By combined use of insulation displacement terminals and crimp terminals, wires with different current ratings can coexist within the same case.
  · Terminals can be replaced after wires are connected, allowing ease of maintenance.
  · Since the insulation displacement area is protected by the housing, a high level of reliability is ensured.
  · Insulation displacement can be performed simply by replacing the applicator of a conventional crimp machine, so no expensive insulation displacement machine is required.
  · Headers support potting: A header with increased height to support potting of the board for waterproofing (via resin filling) is available.
  · A wide variety of offerings: Each of the "board-to-board" and "relay" series offers both single-row and double-row terminal arrangements, as well as tin and gold standard plating.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Remise sur volume

  à partir de∗ ：	0.02 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur circuit imprimé à câble intégré avec pas de 2mm, série DF4

  HIROSE ELECTRONIC

  Connector for direct board-to-cable connection with 2-mm pitch. By directly attaching the terminal insertion socket into the circuit board, the header cost can be minimized.
  
  [Features]
  ・Minimizes header cost: using a dual insertion-removal socket and directly attached connector terminal harness, both circuit boards can have their separate functions used as-is, reducing the required number of headers for a dual terminal socket harness from 2 to 1.
  ・Small type/multi-pin: a wide range of small types with a number of pins.
  ・Circuit board mounting height: 4.3 mm (1 crimp attachment array), maximum pin number: 32 (2 crimp attachment arrays).
  ・Temporary circuit board fastening mechanism: Connector can be temporarily affixed to the circuit board in order to make insertion easier.

  • Remise sur volume

  à partir de∗ ：	0.04 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur / Connecteur à fil discret pour le raccordement, série DF3 (pas de 2 mm)【1-100 pièces par conditionnement】

  HIROSE ELECTRONIC

  Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 1 terminal row. Can use for a wide range of equipment.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Remise sur volume

  à partir de∗ ：	0.11 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur circuit imprimé à câble (pas de 2mm, double rangée, type à broche) - série DF11【1-500 pièces par conditionnement】

  HIROSE ELECTRONIC

  Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 2 terminal row. Can use for a wide range of equipment.
  
  [Features]
  · On-board improved space saving: The terminal pinout has been condensed into a 2-mm dual-row within a 5-mm width.
  · Twice the number of signals can be acquired within the same space as a conventional 2-mm single-row connector.
  · A wide array of variations: Crimped and pressure weld wiring connections are available in board-to-cable/relay/board-to-board connector types for expanding the scope of circuit board design.
  · In addition, you can choose from gold/tin plating as well as versions which support SMT depending on the target application.
  · Covers a broad range of compatible wiring: A 2 mm, dual-row compact design covers a range of compatible wiring from #22-30 AWG.
  · Pressure welded labor-saving wire connection: By using fully automated pressure welding equipment, wire connections can be performed easily, including complex multi-harnesses (branched wiring connections), reducing the number of man-hours and eliminating manual processes.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Remise sur volume

  à partir de∗ ：	0.16 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur de borne D, série DX*LM

  HIROSE ELECTRONIC

  The D terminal connector is for digital broadcast devices.
  
  [Features]
  ・Compatible with 3 mm panel thickness: by pushing in the mating portion 1.5 mm, it is compatible with 3 mm housing panel thickness.
  ・All possible measures against static electricity: through independent construction, the order of metallic shell to lock piece circuit board ensures that static is grounded out.
  ・Temporary circuit board fixing mechanism: a hood-shaped boss is installed on the lower connector portion and designed to fall forward when mounted on the circuit board to prevent wobbling.
  ・Enhanced circuit board fixing power: by soldering the enlarged lock piece, lead portion circuit board fixation is widely improved.
  ・A sufficiently wide safety margin is taken to prevent damage in the case that mishandling or unexpected force is applied.
  ・Conforms to EIAJ standard RC-5237: conforms to D terminal connector requirements for digital broadcast video and image signal connections.

  • Remise sur volume

  à partir de∗ ：	1.40 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Connecteur multifonction en deux parties, demi-pas, série FX2

  HIROSE ELECTRONIC

  Combination offers various connections for board-to-board (stacking, horizontal, vertical) and ribbon cable connections.

  • Remise sur volume

  à partir de∗ ：	2.05 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Connecteur d'E / S demi-pas (type original) série DX

  HIROSE ELECTRONIC

  I/O Connector with a 1.27-mm pitch (Hirose Electric Original Type). A selection of two types of lock methods and abundant variations for wire connection and implementation methods are available.
  
  

  • Remise sur volume

  à partir de∗ ：	6.21 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Connecteur d'E / S demi-pas (type à usage général) série DX*M

  HIROSE ELECTRONIC

  This is a 1.27-mm pitch I/O connector (general purpose type). A wide variety is available to suit different applications.

  • Remise sur volume

  à partir de∗ ：	3.14 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteur DN pour interface type profil bas, petit format

  HIROSE ELECTRONIC

  This small, multi-pin rectangular connector was developed to support the miniaturization of electronic devices, and thinner devices in particular
  
  [Features]
  · The terminal's wire connector is arrayed in a 2.54 mm grid that makes it easy to design circuits on a printed circuit board.
  · The structure of the terminal is based on the manufacturer's SM series (D-sub connectors). This gives the terminal dependable quality.
  · The single-action lock mechanism provides excellent operability.
  · The cover case is designed to be thin and compact and features a low profile in order to meet the needs of high-density mounting. Mounting with 17.78 mm (700 mils) between circuit boards is possible.
  · The cover case is made of an aluminum die casting offering good electromagnetic shielding characteristics. Combined with the connector's metal shell, the above configuration ensures that noise is reduced.
  · The dip connector includes a snap (circuit board temporary joint) bracket.
  · Pressure Connecting type supports connection of two wire types, AWG 26 and 28, via pressure welding, for use with standard 1.27-mm pitch cables.
  · Crimping type can be used to perform crimping of AWG 26 to 28 wiring.
  · Depending on the application, cable can be extracted in either the vertical or horizontal direction.

  • Remise sur volume

  à partir de∗ ：	3.98 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

Loading...