HIROSE ELECTRONIC Connecteurs coaxiaux（Application：Pour PCB）

?* À propos du délai d'expédition et des prix

• 

  Connecteurs MMCX

  HIROSE ELECTRONIC

  The MMCX connector is a small push-on lock coaxial connector.
  
  [Features]
  · Simple push-on format used for easy insertion and extraction.
  · Able to load PCMCIA type II cards: MMCX-LR-SMT (40) have a thickness of 3.51 mm and can be loaded to the back side of type II cards.
  · Moreover, if a 0.36 mm degree of eccentricity from the central card line is used when mounting a card on the circuit board mounting surface, the central card axis and central connector axis will be aligned.
  · Ultra-thin cable compatibility: RG type high frequency coaxial cable... RG-178B/U (⌀1.8), ... RG-316/U (⌀2.59MAX), ⌀1.48 (single layer shield) fluorine resin coaxial cable, ⌀1.32 (double layer shield) ultra-thin fluoride resin coaxial cable, ⌀1.13 (single layer shield) ultra-thin fluoride resin coaxial cable, ⌀1.37 (single layer shield) ultra-thin fluoride resin coaxial cable.
  · Dual terminal connection with other series: Capable of dual terminal connection with U.FL, N, BNC, HRM, and TNC series.
  · Highly coordinated: high frequency traits are realized with a voltage standing wave ratio (V.S.W.R.) of less than 1.2 at a frequency of up to DC 6 GHz (possessing representative value and not compatible with all products).
  ・Compatibility: the opening is standard, allowing for mating with MMCX connectors.

  • Remise sur volume

  à partir de∗ ：	7.05 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur coaxial SMT petit format, série H.FL【100 pièces par conditionnement】

  HIROSE ELECTRONIC

  This is a small coaxial connector for circuit board mounting. It is low-profile with a height of 3 mm on mating.

  • Remise sur volume

  à partir de∗ ：	96.89 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur coaxial petit format, à verrouillage encliquetable, série MSS

  HIROSE ELECTRONIC

  Utilizing a slide snap lock method, both the internal and external conductors are in almost perfect contact, providing excellent durability. There are two types of wiring methods used: crimp wire connection and screw clamps. Compliant with Japan Defense Agency DSPC-6206.
  
  [Features]
  • The Japan Defense Agency has enacted a specifications document: DSPC-6206.
  • Every aspect of performance for mid-size connectors is specifically demonstrated, and although the size is exceedingly miniaturized, performance is comparable to mid-sized high frequency connectors.
  • A slide snap locking system is utilized within the external conductor, and this conductor has near complete contact and also demonstrates excellent vibration resistance.
  • Wire connection work can be conducted in a thoroughly simplified and assured manner using one of these two methods: the crimp wire connection method or the screw clamp method.

  • Remise sur volume

  à partir de∗ ：	8.34 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteurs BNC

  HIROSE ELECTRONIC

  Coaxial connector and BNC connector can be used with a wide variety of devices. · There is a rich selection of product types.
  
  [Features]
  ・The most common 50Ø-type cable: BNC series is the most widely used 50Ø cable (there is also the 75Ø type).
  ・Bayonet lock for quick attachment and detachment: bayonet lock mechanism for easy attachment and detachment.
  ・Applicable cables: complete coaxial cables with an outer diameter of Ø3 - Ø8 (RG-55・58/U, etc.)
  ・Applicable regulations: Japan Defense Agency (DSPC6202).
  ▪ Japanese Industrial Regulations (JISC5412): based on MIL regulations.

  • Remise sur volume

  à partir de∗ ：	8.76 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur coaxial type C05, série UM

  HIROSE ELECTRONIC

  This is a quick-lock type coaxial connector. · There is a rich selection of product types.
  
  [Features]
  · Optimized for ultra-thin coaxial cables: ultra-small coaxial connector optimized for ultra-thin coaxial cables with high reliability.
  · Lock system: The lock system is the quick lock type system.
  · The quick lock type is regulated by Japan Defense Agency Standard DSPC6205.
  · Connection system: The connection system is the extremely easy-to-use and reliable crimp attachment system.

  • Remise sur volume

  à partir de∗ ：	3.73 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur SMA série HRM

  HIROSE ELECTRONIC

  This is a MIL standard coaxial connector, SMA connector. We were the first company to successfully develop this . With high reliability and different variations, it is used with a wide range of equipment.

  • Remise sur volume

  à partir de∗ ：	9.91 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur coaxial SMT petit format, série E.FL

  HIROSE ELECTRONIC

  This small coaxial cable occupies a circuit board area of 9.4 mm².
  
  [Features]
  ・Occupied circuit board area: Compared to the manufacturer of the H.FL series, the occupied circuit board area is reduced by approximately 49% - 56% with an occupied area of 9.2 mm².
  ・Ultra-thin fluorine resin cable: bendable Ø0.81 and Ø1.32 ultra-thin fluorine resin cables are used in an effort to make laying cable easier.
  ・High coordination: the ability to handle high-frequency waves up to DC 2 GHz and a V.S.W.R. of 1.3 or less.
  ・Automatic mount compatibility: the receptacle's embossed packaging allows for automatic mounting.
  ・Easy connector removal: connectors can be easily removed using a removal tool.
  ・Easy mate confirmation: a definite lock feel can be used to confirm mating, even with ultra small models.

  • Remise sur volume

  à partir de∗ ：	0.73 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Interrupteur coaxial (CC - 6GHz) pour interface type petit format, hauteur 3.9mm

  HIROSE ELECTRONIC

  An ultra-small coaxial switch with a mount height of 3.9 mm. Can also be used as an external antenna connector in addition to circuit checking.
  
  [Features]
  · Low insertion losses: 1 GHz TYP when not mated. 0.08 dB 2GHz TYP. Low insertion losses of 0.10 dB.
  · Space saving: The outer dimensions are 5.8 mm x 5.4 mm to save space.
  · Low profile: Working towards profile with height of 3.9mm.
  · Lightweight: Lightweight, weighing 0.11g.
  · Long life: a life span of 12,000 insertions and extractions.
  · Supports automatic mounting: embossed tape allows for automatic mounting.
  · Wide range of use, corresponds to up to DC 6 GHz: Usable with frequencies up to DC 6 GHz.
  ・Lead free: both the receptacle and plug are lead free out of consideration for environmental issues.
  ・Furthermore, the construction takes flux oozing into consideration.
  · Self alignment: ±0.5 mm guide amount when mating with plug.

  à partir de∗ ：	78.62 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

Loading...