HIROSE ELECTRONIC Connecteurs entre circuits imprimés（Méthode de connexion des fils：Autre）

?* À propos du délai d'expédition et des prix

• 

  Connecteur EnerBee circuit imprimé à câble avec verrou, série DF33C

  HIROSE ELECTRONIC

  Maximum 5 A. 3.3mm pitch. Satisfies the criteria of the Electrical Appliances and Material Safety Act: Creepage distance: 1.5 mm (resin filling) Widely used as a compact internal power supply connector.

  • Remise sur volume

  à partir de∗ ：	0.16 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur de carte CF séries MI20 / 21

  HIROSE ELECTRONIC

  This is a CF card connector. Wide variety available to suit different applications, with differing mount orientation, standoff inclusion, ejector button, and supported cards.

  • Remise sur volume

  à partir de∗ ：	3.81 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur à raccordement par le bas avec pas de 2.54mm, série MDF7

  HIROSE ELECTRONIC

  With the 2.54-mm pitch bottom entry connector and circuit board height can be set freely. Also able to be connected with IPM and IGBT.
  
  [Features]
  ▪ Circuit board gap dimensions can be set freely: With the header pin pass-through type construction and a number of header variations, circuit board gap dimensions can be set outside of predetermined levels.
  ▪ Unified part loading surface: 2 circuit board part loading surfaces can be oriented in the same direction while facing each other.
  ▪ Rich variation: single-array, double-array, and tin/gold plating available.
  ▪ In addition, we provide headers that conform to all circuit board gap dimensions for compatibility with items outside the catalog. Feel free to discuss further details with us.

  • Remise sur volume

  à partir de∗ ：	0.51 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur Berg avec pas de 2.54mm (borne type à 2 rangée), série A1

  HIROSE ELECTRONIC

  2.54-mm pitch pin header terminal 2 row type. Can be arrayed without creating wasted space on 2.54 mm mesh board.
  
  [Features]
  · High density: Can be arrayed without creating wasted space on a 2.54 mm mesh board when the connectors are arrayed lengthwise.
  · Number of pins variations: A1 series has 16 types from 6 pins to 64 pins and A2 series has 20 types from 1 pin to 20 pins.
  · Compatibility: the A1 series is interchangeable with the HIF3B series cable side and HIF4H (receptacle) for a wide range of use.

  • Remise sur volume

  à partir de∗ ：	0.58 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur Berg avec pas de 2.54mm (borne type à 1 rangée), série A2

  HIROSE ELECTRONIC

  2.54-mm pitch pin header terminal 1 row type. Can be arrayed without creating wasted space on 2.54 mm mesh board.
  
  [Features]
  · High density: Can be arrayed without creating wasted space on a 2.54 mm mesh board when the connectors are arrayed lengthwise.
  · Number of pins variations: A1 series has 16 types from 6 pins to 64 pins and A2 series has 20 types from 1 pin to 20 pins.
  · Compatibility: the A1 series is interchangeable with the HIF3B series cable side and HIF3H (receptacle) for a wide range of use.

  • Remise sur volume

  à partir de∗ ：	0.37 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur Berg, pas de 2mm (borne type à 2 rangées) série A3

  HIROSE ELECTRONIC

  2-mm pitch pin header terminal 2 row type. Allows for even higher precision installation.
  
  [Features]
  · Small, high-density mounting: A small, lightweight design enables high-density mounting.
  · Also, the crimped slip case can be used by aligning connectors in a 2 mm grid.
  · Product variation: In addition to dip types, there are SMT and crimp types, and thus a wide array of variations is provided.
  · Stacking variation: When used board-to-board in combination with the A3B pin header, the distance between the boards can be set to 6 mm, or 5.2 mm when used in combination with the A3C pin header.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Remise sur volume

  à partir de∗ ：	0.25 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur PC Card série IC1, compatible avec la norme PC Card

  HIROSE ELECTRONIC

  This PC card connector is compliant with the PC Card Standard.
  
  [Features]
  · Compliant with the PC Card Standard: the product complies with the PC Card Standard, including a mechanism for preventing incorrect insertion, a sequence structure for protecting circuits, and other features.
  · Features a mechanism for preventing the card from shooting out: the ejection mechanism uses a unique structure to improve card protection.
  · Effective use of space: standoffs that enable the mounting of parts underneath the connector are also available.
  · Support for Type I and Type II cards: All ICI series pin connectors in the catalog support both Type I and Type II cards.
  · Card connectors that support automatic mounting are available.
  · Different types are available, making it possible to change the circuit board position based on the height of the parts contained in the PC card. Lead eccentricities of -0.2 mm, 0.3 mm, 0.55 mm, or 0.9 mm, and a circuit board-centered type are available.

  à partir de∗ ：	3.41 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteurs / Connecteurs FPC/FFC, série FH28 (hauteur 2,55 mm)

  HIROSE ELECTRONIC

  [Features]
  · A solidly built connector for FPC/FFC connections.
  · An FPC positioning mechanism provides highly reliable connections.
  In-stock items are custom products, therefore returns and cancellations are not possible.

  • Remise sur volume

  à partir de∗ ：	6.52 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés, pas de 0.5mm, hauteur 2 à 3mm - série FX11

  HIROSE ELECTRONIC

  [Features]
  · A board-to-board connector with a ground plate.
  · Select with/without the ground plate and also the height of the board spacing (2–3 mm) to match the application.

  • Remise sur volume

  à partir de∗ ：	3.21 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteurs pour branchement sur connecteur FPC / FFC, pas de 0.5 / 1mm - série FH12

  HIROSE ELECTRONIC

  [Features]
  · The industry's first flip-lock ZIF connector.
  · Available in a wide array of variations with a proud track record lasting more than 10 years.
  In-stock items are custom products, therefore returns and cancellations are not possible.

  • Remise sur volume

  à partir de∗ ：	1.37 €
  Délai d'expédition minimum ：	13 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés (pas de 0.5mm, hauteur 4 à 5mm) - série FX10

  HIROSE ELECTRONIC

  [Features]
  · Board-to-board connector with a ground plate, height between boards depends on application (4 to 5 mm) and whether or not to use a ground plate is selectable.
  Some in-stock items are custom products, therefore returns and cancellations are not possible.

  • Remise sur volume

  à partir de∗ ：	3.30 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés avec pas de 0.5mm, hauteur 4 à 8mm - série DF17

  HIROSE ELECTRONIC

  Connector for board to board connection with 0.5-mm pitch. Select the distance 4mm to 8mm between circuit boards by combining header and receptacle.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Remise sur volume

  à partir de∗ ：	7.77 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés avec pas de 0.6mm, hauteur 3 à 4mm, série FX8

  HIROSE ELECTRONIC

  The height between boards can be selected from 3 to 4 mm. Although it is compact, it has a guiding mechanism to improve operability. Can be used for a wide range of equipment.
  
  [Features]
  · Stacking height 3 mm to 16 mm compatible.
  · Stacking height between boards of 3 mm to 16 mm can be applied.
  ▪ SMT co‐planarity.
  ▪ The SMT solder part lead's co-planarity maintains high precision and 0.1 mm max.
  · Fit guiding.
  · Equipped with latching guiding ribs while being extremely small, the self-alignment tolerance of ±0.6 mm has been given much attention.
  · Prevents mis-insertion with circuit boards.
  · By placing circuit board positioning screws, mis-insertion to the circuit board is prevented based on the screw location and diameter.
  ・2-Piece Unit.
  ・With 2 fine-pitch connector units used for increased connection reliability, we offer a unique 2-connection method for each terminal as a new way to ensure highly accurate mounting (standard 11 mm connection pitch between the 2 arrays in the 2-piece unit).

  • Remise sur volume

  à partir de∗ ：	1.91 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés (pas de 0.6mm, hauteur 5 à 16mm) - série FX8C

  HIROSE ELECTRONIC

  The height between boards can be selected from 5 to 16 mm. Although it is compact, it has a guiding mechanism to improve operability. Can use for a wide range of equipment.
  
  [Features]
  · Stacking height 3 mm to 16 mm compatible.
  · Stacking height between boards of 3 mm to 16 mm is applicable.
  ▪ SMT co‐planarity.
  ▪ The SMT solder part lead's co-planarity maintains high precision and 0.1 mm or less.
  · Fit guiding.
  · Although very small in size, importance is placed on fit operability by providing a guiding rib with a self-alignment of ± 0.6 mm.
  · Protects against incorrect insertion into the circuit board.
  · Equipped with a circuit board positioning boss, which prevents incorrect insertion into the circuit board by leveraging the position and diameter of the boss.
  · Two-part integrated product.
  · This novel, two-piece integrated product is available for all terminal pin number configurations and makes it possible to maintain mounting position accuracy. This is achieved by consolidating two connectors using a unique method, which improves fitting reliability when using two fine-pitch connectors. (The standard fitting pitch between the two rows for the two-piece integrated version is 11 mm.)
  
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Remise sur volume

  à partir de∗ ：	2.85 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés avec pas de 0.8mm, hauteur 5 à 9mm, série FX6

  HIROSE ELECTRONIC

  The height between boards can be selected from 5 to 9 mm. With a long mating length and large self-alignment volume while maintaining a small size, this product offers high connection reliability.
  
  [Features]
  · Compatible with 5 mm to 9 mm stacking height.
  · The stacking height between circuit boards is set at between 5 and 9 mm. in 1 mm increments.
  · Long effective mating length of 1.7 mm.
  · A long and spacious effective mating length of 1.7 mm even with RoPro connectors.
  · Fit guiding.
  · A ±1 mm self alignment and large guiding volume makes for easy mating.
  · Supports automatic mounting.
  ·In consideration of automatic mounting, and using stick packaging for standard packaging specifications, units with less than 80 pins are available for emboss packaging (however the product has an 80-pin limit).
  ▪ The SMT solder portion's lead co-planarity maintains a high precision of 0.1 mm max.

  • Remise sur volume

  à partir de∗ ：	1.50 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés avec pas de 1.27mm, hauteur 5 à 11mm, série FX4

  HIROSE ELECTRONIC

  Board-to-board connector with half pitch. DIP circuit board mounting method; choose from a 5 to 11 mm mating height.
  
  [Features]
  ·The FX4 series is a small-type board-to-board connector able to be set at a stacking height of 1 mm.
  ●Dip Timer.
  1. Small and Lightweight.
  ・Mounting space and weight are the same as the prior products (FX2 series).
  ・Approx. 30% in comparison, mounting area is approx. 70% of prior product.
  2. · Compatible with 5 mm to 11 mm stacking height.
  · The stacking height between circuit boards is set at between 5 and 11 mm. in 1 mm increments.
  3. Prevention of flux oozing.
  · Prevents flux oozing during circuit board dip soldering.
  4. Construction that prevents mis-insertion and reduces the required insertion/extraction force.
  · The mating portion is constructed to completely prevent mis-insertion. It also utilizes a construction that reduces the amount of force required to insert and extract the connector.

  • Remise sur volume

  à partir de∗ ：	2.12 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés pour connexions perpendiculaires avec pas de 1mm, série FX5

  HIROSE ELECTRONIC

  A board-to-board connector for perpendicular connection. Equipped with 2 header heights to choose from, 2-stage sequence construction, and a large, inviting form.
  
  [Features]
  · Number of pins, header-side height: 2 types.
  · 2 header types: low-back and high-back, are provided for variation in pin number when connecting to HDD, FDD, CD-ROM, and other units, as well as for variation in mating height.
  · 2-stage sequence construction: the mating sequence has been constructed in 2 stages to protect the end unit.
  ·Fit guiding: With a ±1 mm self alignment, large guiding volume for easy mating, and guide ribs, mating is easily achieved.
  ▪ The SMT solder portion's lead co-planarity maintains a high precision of 0.1 mm max.
  ▪Miniaturization: Mounting area has been reduced by approx. 30% compared to prior half pitch connectors (1.27-mm pitch).

  • Remise sur volume

  à partir de∗ ：	2.14 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés avec pas de 2.54mm : Série HIF3H

  HIROSE ELECTRONIC

  This is a board-to-board interconnecting (stacking, vertical) connector with a 2.54mm pitch. This can be combined with other HIF3 series connectors.
  
  [Features]
  ・Product variations: It is possible to connect board-to-board either horizontally or at a right angle.
  ・Compatibility: It can be combined with other HIF3 series connectors.

  • Remise sur volume

  à partir de∗ ：	1.94 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Embase à montant à connexion verticale, pas de 2.5mm, série MDF14A

  HIROSE ELECTRONIC

  [Features]
  ■ For low-cost vertical board mounting with no reseating necessary
  · Post header specially designed for vertical board mounting with no reseating necessary.
  · Low-cost connection provided by a combination receptacle and plug design.
  ■ Current capacity: 5A
  · ø0.8mm round post pins provide extra strength and enable current capacity of 5A.
  ■ Temporary board fixing mechanism
  · Kinking keeps boards temporarily in place.
  ■ Pin-out specifications
  · Compatible with a variety of pin-out specifications.

  • Remise sur volume

  à partir de∗ ：	0.33 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur Berg avec pas de 2mm (borne type à 1 rangée), série A4

  HIROSE ELECTRONIC

  2-mm pitch pin header terminal 1 row type. Allows for even higher precision installation.
  
  [Features]
  · Small, high-density mounting: A small, lightweight design enables high-density mounting.
  · Also, the crimped slip case can be used by aligning connectors in a 2 mm grid.
  · Product variation: In addition to DIP types, there are SMT and crimp types, and thus a wide array of variations is provided.
  · Stacking variation: Can be set when used with board-to-board, in combination with A3B pin header and a 6 mm distance between boards, or in combination with A3C pin header and a space of 5.1 mm between boards.

  • Remise sur volume

  à partir de∗ ：	0.25 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur circuit imprimé à câble avec verrou, pas de 7.92mm, avec prise en charge des intensités élevées - série DF22【1-100 pièces par conditionnement】

  HIROSE ELECTRONIC

  [Features]
  · Cable connector for board-to-cable and cable-to-cable connections. Supports 30 maximum amperes.
  · Equipped with a lock mechanism and mechanism for preventing incorrect insertion to ensure safety.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Remise sur volume

  à partir de∗ ：	0.61 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur PC Card compatible CardBus, série IC11S

  HIROSE ELECTRONIC

  A PC card connector compatible with CardBus based on PC Card Standards. Select from mount direction, eject button, and stand-off variations.
  
  [Features]
  · PC Card Standard: Ground plate equipped with 8 connection ground points.
  ·Signals can be accelerated by using a PC card compatible with CardBus through this configuration.
  · Compatible with Type I, Type II, and Type III cards.
  · Includes terminal for ground clip.
  · Space efficient: designed to also have a shallower depth, thereby reducing the required circuit board area.
  · Further, POP-UP version 2 has a reduced pattern restriction area compared to version 1.
  · Lowered height: Usable with thin-type sets due to a lowered height of 5.6 mm.
  · High-performance eject mechanism: The eject mechanism uses a 2 point terminal push ejection mechanism to allow smooth card removal.
  · Independent ejection mechanism used for easy removal of multiple high-output cards.
  · Many variations: with many variations, a type that matches to a particular set can be selected.
  · Choose from a standard type that mounts to the front of a circuit board, or a reverse type that mounts to the back.
  · The types of eject button are arranged from left to right: rigid, turnable, and POP-UP.
  · Standoff attachment is provided to allow parts to be mounted to the bottom portion of the connector.
  · Lighter weight: Sets can be lightened, as this connector is 12.7 g lighter than normal types.
  · Also, POP-UP version 2 is approx. 12% lighter than version 1.

  • Remise sur volume

  à partir de∗ ：	6.36 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés conforme à la norme DIN, série PCN10

  HIROSE ELECTRONIC

  This is a DIN standard compliant board-to-board connector. Available in a wide variety and supports various connections.

  • Remise sur volume

  à partir de∗ ：	1.80 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés conforme à la norme DIN, série PCN12

  HIROSE ELECTRONIC

  This is a DIN standard compliant board-to-board connector. Available in a wide variety and supports various connections.

  • Remise sur volume

  à partir de∗ ：	1.79 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés conforme à la norme DIN, série PCN13

  HIROSE ELECTRONIC

  This is a DIN standard compliant board-to-board connector. Reduces cost by using a single-sided, two-point connection for the terminal.

  à partir de∗ ：	2.60 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteurs arrière série NX pour cartes d'E / S

  HIROSE ELECTRONIC

  These are back connectors for I/O cards. The low profile design is shielded using a metal shell.
  
  [Features]
  • Ultra-low profile: The mounted height of the receptacle connector is 2.9 mm for an ultra-low profile, allowing mounting on type II I/O cards.
  • Shell is metal: A metal shell was used for better shielding.
  • Structured so that the metal shell always touches before the contacts do.
  • Full ESD shielding: A cover over the mold provides full ESD shielding.
  • Locks securely: An inner lock makes locking more secure.
  • Less wiring work: The plug-side wiring uses AWG #28 pressure contacting (discrete type), so wiring is less work.
  • Sequence structure: The receptacle connector for the I/O card is a 0.8 mm-pitch, SMT-type sequence structure.

  • Remise sur volume

  à partir de∗ ：	5.12 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur pour carte microSD - série DM3

  HIROSE ELECTRONIC

  A socket connector for use with the microSD Card TM. Available in a wide array of variations.
  Some in-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Remise sur volume

  à partir de∗ ：	1.60 €
  Délai d'expédition minimum ：	13 jours

  *Prix unitaire/configuration de base

• 

  Prise compatible CardBus conforme aux normes PC Card, série IC9

  HIROSE ELECTRONIC

  This socket connector conforms to PC card bus standards. Choose from 2 lead degree of eccentricity.
  
  [Features]
  ・PC Card Standards: Equipped with a ground plate containing 8 ground dimples.
  ・This allows for every type of card signal to be accelerated.
  ・Repairability: Separate card connector and ground plate mounting construction allows for soldering repairs.
  ・ Lead degree of eccentricity: 0.3 mm and 0.9 mm degrees of eccentricity are provided in order to alter circuit board position in line with PC card height.

  • Remise sur volume

  à partir de∗ ：	5.65 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur pour carte SIM, série ID1

  HIROSE ELECTRONIC

  This is a SIM card connector. With the slide-lock method, card holder opening and closing is easy.

  • Remise sur volume

  à partir de∗ ：	1.96 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés FunctionMAX, série FX18

  HIROSE ELECTRONIC

  0.8mm pitch. This is the basic series that is central to the FunctionMAX range. Selection is easy from the wide range of options, and the product is very user-friendly.

  • Remise sur volume

  à partir de∗ ：	8.91 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés FunctionMAX, série FX20

  HIROSE ELECTRONIC

  0.5mm pitch. The structure features two independent contacts for high contact reliability. It is suitable for harsh conditions such as automotive equipment applications.

  • Remise sur volume

  à partir de∗ ：	5.07 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

Loading...