JUNKOSHA Raccords de serrage

?* À propos du délai d'expédition et des prix

• 

  Coude de raccordement orientable en acier inoxydable JUNRON

  JUNKOSHA

  Usable across a broad temperature range. Free of tubing wear due to over-tightening of cap nuts or the like. Connected parts will not break unless the tube ruptures. Does not require regular cap nut torque tightening.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	36.65 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Embout de raccordement en laiton JUNRON

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings."
  The tube insert allows for secure connection of a sleeve and a cap nut.
  With collar thread seal for each R (PT) thread size.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	1.93 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Raccord coudé en laiton JUNRON

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	3.67 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  T de raccordement en laiton JUNRON

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 for "pneumatic pipe fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. Each R (PT) screw size has a different colored screw seal.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	5.94 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  T d'entretien en laiton JUNRON

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism clamps onto the tube insert with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	6.86 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Raccord-union en T en laiton JUNRON

  JUNKOSHA

  [Features]
  · The union tees of the metric Series conform to Japanese Industrial Standard JIS B8381 ‘Pneumatic Fittings’.
  · A mechanism where the tube insert is held and fastened by a sleeve and cap nut to create a secure connection
  · The connection will remain intact until the tube breaks.
  · Equipped with a threaded collar thread by R (PT) thread size.
  · Supports compressed air lines, water pressure, and hydraulic pressure.
  

  Fichiers CAD 2D disponibles

  à partir de∗ ：	6.78 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Raccord de traversée femelle en laiton JUNRON

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  à partir de∗ ：	6.22 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Raccord coudé en laiton JUNRON

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 for pneumatic fittings. The mechanism clamps on to the tube insert with the sleeve and the cap nut for a reliable connection. With collar thread seal for each R (PT) thread size.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	6.41 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Raccord de traversée en laiton JUNRON

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  à partir de∗ ：	5.00 €
  Délai d'expédition minimum ：	12 jours

  *Prix unitaire/configuration de base

• 

  Raccords Junlon en laiton - écrou borgne avec fil de protection

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  à partir de∗ ：	3.03 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Manchon de raccordement en laiton JUNRON (résine)

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 for pneumatic fittings. The mechanism clamps on to the tube insert with the sleeve and the cap nut for a reliable connection. With collar thread seal for each R (PT) thread size.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	0.31 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Manchon de raccordement en laiton JUNRON (laiton)

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	0.84 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Écrou borgne pour raccord coudé en laiton JUNRON

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism clamps onto the tube insertwith the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	0.68 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Raccord-union en laiton JUNRON

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 for pneumatic fittings. The mechanism clamps on to the tube insert with the sleeve and the cap nut for a reliable connection. With collar thread seal for each R (PT) thread size.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	3.25 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Embout de raccordement en acier inoxydable JUNRON

  JUNKOSHA

  Usable across a broad temperature range. No wear and tear to tubing as a result of the over tightening of cap nut, etc.
  
  [Features]
  · Because the product consists of SUS316, which has high corrosion resistance properties, it can be used in a wide temperature range, at both low and high temperatures.
  · Designed especially for fluorine polymer/nylon resin tubes, so the tube does not rupture due to excessive tightening of cap nuts, etc.
  · No abnormality in the connected part unless the tube is ruptured.
  · The tightening torque of the cap nut does not need to be managed.
  Fitting uses SUS316, so it resists rust.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	17.06 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Coude de raccordement en acier inoxydable JUNRON

  JUNKOSHA

  Usable across a broad temperature range. Prevents wear to tubing cost by over-tightening of cap nuts and the like. No abnormality in the connected part unless the tube ruptures. Does not require management of cap nut tightening torque.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	27.68 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Raccord union en acier inoxydable JUNRON

  JUNKOSHA

  Usable across a broad temperature range. Free of wear to tubing due to over-tightening of cap nut, etc. No abnormality in the connector unless the tube ruptures. Does not require management of cap nut tightening torque.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	27.65 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Raccord union en T en acier inoxydable JUNRON

  JUNKOSHA

  Usable across a broad temperature range. Free of wear to tubing due to over-tightening of cap nuts, etc. No abnormality in the connector unless the tube ruptures. Does not require management of cap nut tightening torque.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	51.84 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Raccord coudé en acier inoxydable JUNRON

  JUNKOSHA

  Usable across a broad temperature range. Free of wear to tubing due to over tightening of cap nut and the like. No abnormality in the connected part unless the tube ruptures. Does not require management of cap nut tightening torque.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	36.03 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  T de raccordement en acier inoxydable JUNRON

  JUNKOSHA

  Usable across a broad temperature range. Free of wear to tubing due to over-tightening of cap nut, etc. No abnormality in the connector unless the tube ruptures. Does not require management of cap nut tightening torque.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	40.18 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  T d'entretien en acier inoxydable JUNRON

  JUNKOSHA

  Usable across a broad temperature range. Wear on tubing due to over tightening of the cap nut, etc. is eliminated.
  
  [Features]
  · As the product consists of SUS316, which has good corrosion resistance properties, it can be used in a wide temperature range from low to high.
  · Designed specially for fluorine polymer/nylon resin tubes to ensure that the tube does not rupture due to excessive tightening of the cap nut, etc.
  · No abnormalities are allowed in the connected part unless the tube ruptures.
  · The tightening torque of the cap nut does not need to be managed.
  Fitting uses SUS316, so it is rust resistant.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	42.28 €
  Délai d'expédition minimum ：	12 jours

  *Prix unitaire/configuration de base

• 

  Embout femelle de raccordement en acier inoxydable JUNRON

  JUNKOSHA

  Usable across a broad temperature range. No wear and tear to tubing as a result of an over tightening of cap nut, etc. No abnormality in the connected part unless the tube is ruptured. Does not require management of cap nut tightening torque.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	25.17 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Raccord de traversée femelle en acier inoxydable JUNRON

  JUNKOSHA

  Usable across a broad temperature range. No wear and tear to tubing as a result of an over tightening of cap nut, etc. No abnormality in the connected part unless the tube is ruptured. Does not require management of cap nut tightening torque.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	33.85 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Raccord de traversée en acier inoxydable JUNRON

  JUNKOSHA

  Usable across a broad temperature range. No wear and tear to tubing as a result of the over tightening of cap nut, etc.
  
  [Features]
  · Because the product consists of SUS316, which has high corrosion resistance properties, it can be used in a wide temperature range, at both low and high temperatures.
  · Designed especially for fluorine polymer/nylon resin tubes, so the tube does not rupture due to excessive tightening of cap nuts, etc.
  · No abnormality in the connected part unless the tube is ruptured.
  · The tightening torque of the cap nut does not need to be managed.
  Fitting uses SUS316, so it resists rust.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	60.69 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Raccord de traversée mâle en acier inoxydable JUNRON

  JUNKOSHA

  Usable across a broad temperature range. No wear and tear to tubing as a result of the over tightening of cap nut, etc.
  
  [Features]
  · Because the product consists of SUS316, which has high corrosion resistance properties, it can be used in a wide temperature range, at both low and high temperatures.
  · Designed especially for fluorine polymer/nylon resin tubes, so the tube does not rupture due to excessive tightening of cap nuts, etc.
  · No abnormality in the connected part unless the tube is ruptured.
  · The tightening torque of the cap nut does not need to be managed.
  Fitting uses SUS316, so it resists rust.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	40.09 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Embout JUNRON, série US2, pour raccords en acier inoxydable et tubes souples

  JUNKOSHA

  [Features]
  ▪ Stainless steel fittings for flexible tubing.
  ▪ To resolve tube twisting during piping, a unique mechanism of cap nuts built into the sleeve can be used.
  · Tightening torque of the cap nut does not need to be managed.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	16.68 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Coude JUNRON, série US2, pour raccords en acier inoxydable et tubes souples

  JUNKOSHA

  Stainless steel fittings for flexible tubing. To resolve snaking during piping, we use cap nuts built into the sleeve that use a mechanism unique to our company. Does not require management of cap nut tightening torque.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	34.36 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Raccord union JUNRON, série US2, pour raccords en acier inoxydable et tubes souples

  JUNKOSHA

  Stainless steel fittings for flexible tubing. To resolve tube twisting during piping, cap nuts built into the sleeve that use the unique Junkosha mechanism are employed. The cap nut tightening torque does not require management.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	42.00 €
  Délai d'expédition minimum ：	12 jours

  *Prix unitaire/configuration de base

• 

  Raccord en T JUNRON, série US2, pour raccords en acier inoxydable et tubes souples

  JUNKOSHA

  Stainless steel fittings for flexible tubing. To resolve tube twisting during piping, we use cap nuts built into the sleeve that use a unique Junkosha mechanism. Does not require management of cap nut tightening torque.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	93.20 €
  Délai d'expédition minimum ：	12 jours

  *Prix unitaire/configuration de base

Loading...