OMRON Connecteurs entre circuits imprimés（Sens de connexion：Angle）
| Nombre de jours d'expédition |
|
|---|
?* À propos du délai d'expédition et des prix
-
- Recommandation
Connecteur DIN (type 4 rangées, 128 contacts) - XC5 (multi-contact)
OMRON
[Features]
・ A multi-pin connector designed with DIN in mind, expanded to include a large number of contacts (4 rows, 128 contacts).
・ The aim is to move to a larger number of contacts while leveraging the best points of DIN connectors.
・ Two types are available for the plug L-shaped terminal: a standard DIN type and a circuit board mounted DIN style type.
・ In order to realize a low insertion force and maintain high reliability, the contact configuration adopts twin contacts.- Remise sur volume
à partir de∗ ： 20.53 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
- Recommandation
Connecteur DIN (pour courants électriques moyens et élevés) - XC4
OMRON
[Features]
・ This is a DIN connector for medium and high electrical currents, for which standards have been set internationally.
・ It conforms to and is compatible with DIN41612.
・ As there is sufficient insulation distance, it can be used with medium and high electrical currents, and high voltage circuits.
・ It can be mounted within the same rack as the XC5 series.
・ There is a wide selection of the M type of DIN connectors (mixed type) available.
▪ UL standard (File No.E103202) certified products are used as standard (except for some products).- Remise sur volume
à partir de∗ ： 14.18 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Connecteur de câble plat (type à usage général) - XG4
OMRON
The core of this printed circuit board connector is compliant with MIL standards.
[Features]
· The adoption of a new high-productivity design has delivered both high reliability and low costs.
· A box type plug (XG4C type) that helps save space during installation is also available.
· A press-fit type plug (XG4E type) that can be used as a relay is also available.
· A wide range of installation options are available by combining discrete wire press-fitted/crimped connectors (XG5 type), original plugs (XG8 type), and PCB types (XG2 type).
· The use of the simple and unique locking levers developed by the manufacturer makes it possible to lock original plugs (XG8 type) and box type plugs (XG4C type).
· Complies with MIL standards (MIL-C-83503).
· UL standard (File No.E103202) certified products are used as standard (except for the XG4U and XG4H models).- Remise sur volume
à partir de∗ ： 1.52 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Connecteur DIN (type double contact) - XC5 (norme DIN)
OMRON
[Features]
・ The number of international standard DIN connectors has been expanded substantially.
・ The aim is to expand the number of contacts while leveraging the best points of DIN connectors.
・These variations can be used with a number of industrial applications.
・ This fits global needs by moving from one-piece connectors (card edged) to two-piece connectors.
・ A low price has been realized while also being able to maintain high reliability through the use of a twin contact type.
・ Low insertion force has been realized thanks to FEM analysis.
・ Can fit with the manufacturer's XC series.
▪ UL standard (File No.E103202) and CSA standard (File No. LR62678) certified products are used as standard.- Remise sur volume
à partir de∗ ： 4.02 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Connecteur style DIN (type double contact) - XC5 (style DIN)
OMRON
[Features]
・ An expanded DIN style connector series, designed with DIN in mind.
・ Fits with DIN standard connectors.
・ As it is a circuit board mounted type, it is ideal for automatic solder mounting.
・ DIN style 1 uses the same method of attachment as DIN.
・ DIN style 2 broadens the mounting dimensions further, allowing mounting with excess room.
・UL standard (File No.E103202) and CSA standard (File No. LR62678) certified products are used as standard.
(Except XC5).- Remise sur volume
à partir de∗ ： 3.14 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Connecteur séquentiel pour prise DIN - XC7
OMRON
[Features]
· A sequence connector made using DIN standard dimensions.
· Daughterboard hot swapping is made possible by inserting a power line from the front and extracting from the rear.
· Can be used in the same way as with standard DIN connectors. The mounting dimensions are the same as standard B type, and C type DIN connectors. Uses a sequence terminal for all connections and has a fit length of 4 mm, helping vastly save on mounting space.
· Uses a 2-stage sequence for the socket-end 1 mm sequence terminal, and 3-stage sequence for the plug-end sequence terminal.
· The contacts use a dual-sided contact structure. Furthermore, the gold/palladium plating of the contact points increases durability and allows for 5,000 insertions and extractions.
· The sequence terminal position can be chosen.- Remise sur volume
à partir de∗ ： 15.31 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Connecteur HM (connecteurs au pas métrique, pas de 2mm) - XC8 / XC9
OMRON
[Features]
・ PCI bus standard for use with industrial-use computers.
・ Compliant with Compact PCI compatible board-to-board 2.0-mm pitch IEC61076-4-101 connectors.
・ Supports 3U and 6U Euro Card packages.
・ The socket contact is a highly reliable double-sided contact type.
▪ UL standard (File No.E1032020) certified products are used as standard (except for some products).- Remise sur volume
à partir de∗ ： 26.42 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Connecteur USB, XM7
OMRON
A compact interface connector that complies with USB standards
[Features]
· Mini-USB connector.
· 5000 installation/removal cycles.
· L-shaped DIP terminals and SMT terminals available.
· USB connector.
· The A type socket is for PCs and USB hubs, etc. The B type socket is for printers, scanners, mice and other PC peripherals.- Remise sur volume
à partir de∗ ： 1.26 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Fiche d'origine - XG8
OMRON
[Features]
・ This is a general purpose original plug that conforms to a broad range of applications.
・ It can be widely used as a plug for a variety of socket fitting.
・ Examples of conforming socket connectors (manufacturer: …, Connector for XG4M flat cable/XG5 loose wire insulation displacement connector.
· Compatible with through hole diameter ⌀0.8.
・ For the 2-column type of L-shape terminal plug, through the utilization of a block type of base, workability is improved during soldering, a lock lever that has been simplified further is used and simple locking is possible (except for XG8V, XG8W Straight).
・ Separation cut is possible (except XG8WL type).
▪ UL standard (File No.E103202).
・ Certified products are used as standard (only XG8A and XG8B).- Remise sur volume
à partir de∗ ： 1.98 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Connecteur demi-pas (pour connexions entre circuits imprimés) - XH2
OMRON
A 1.27-mm pitch connector for high-density mounting and compacted electronic devices
[Features]
· Available in the same shape as the G5D in both AC/DC or DC-only types.
· Open-state leakage current between outputs is 10 μA or less.
· The voltage resistance between input/output is 2500 VAC.
· Input resistance and non-input resistance types available.
· Overvoltage absorption circuit built in.
▪ Can switch between AC full-wave rectification and half-wave rectification.- Remise sur volume
à partir de∗ ： 4.67 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Connecteur demi-pas (pour connexions entre circuits imprimés) - XH3
OMRON
[Features]
・ A space saving type that saves space in the screw mounting section.
・ Handles stacking heights of 12 mm to 20 mm.
・ A half pitch connector that handles heights between circuit boards of 12 mm to 20 mm at a pitch of 1 mm with stacking connections.
・ High-density mounting is possible thanks to the 2-row configuration with a contact pitch of 1.27 mm.
・ Connections with the circuit board use four row staggered configurations (1.27 mm × 1.905 mm), and stop pins are used as standard for all contains to help prevent floating and falling during soldering.
・ Uses a leaf connection structure that is able to hold up to prying and that enables smooth insertion and extraction.
・ Has a mating length of 3.1 mm, helping improve space during mounting.
・ The design of the press fit section helps maintain a stable contact force.
・ What's more, by utilizing gold and palladium-plated contact points, the reliability of the contacts has been improved even further.
▪ UL standard certified product (File No.E103202).
・Cannot be mated with XH2/XH4 half pitch connectors.- Remise sur volume
à partir de∗ ： 5.29 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
| Marque |
|---|
| Série du produit |
| à partir de∗ |
| Délai d'expédition minimum ： |
| Forme du connecteur |
| A· B· C |
| D· E· F |
| G·H·I |
| M·N·O |
| P· Q· R |
| S· T· U |
| V· W· X |
| Nombre |
| Broche / contact applicable |
| Nombre d'âmes |
| Application |
| Courant admissible(A) |
| Tension admissible(V) |
| Méthode de connexion des fils |
| Sens de connexion |
| Fonction de protection (résistance environnementale) |
| Norme représentative |
|
|
|
|
|
|
|
|
|
|
| |
| Marque | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON |
| Série du produit | Connecteur DIN (type 4 rangées, 128 contacts) - XC5 (multi-contact) | Connecteur DIN (pour courants électriques moyens et élevés) - XC4 | Connecteur style DIN (type double contact) - XC5 (style DIN) | Connecteur HM (connecteurs au pas métrique, pas de 2mm) - XC8 / XC9 | Connecteur demi-pas (pour connexions entre circuits imprimés) - XH2 | Connecteur demi-pas (pour connexions entre circuits imprimés) - XH3 | |||||
| à partir de∗ | 20.53 € *Prix unitaire/configuration de base Remise sur volume | 14.18 € *Prix unitaire/configuration de base Remise sur volume | 1.52 € *Prix unitaire/configuration de base Remise sur volume | 4.02 € *Prix unitaire/configuration de base Remise sur volume | 3.14 € *Prix unitaire/configuration de base Remise sur volume | 15.31 € *Prix unitaire/configuration de base Remise sur volume | 26.42 € *Prix unitaire/configuration de base Remise sur volume | 1.26 € *Prix unitaire/configuration de base Remise sur volume | 1.98 € *Prix unitaire/configuration de base Remise sur volume | 4.67 € *Prix unitaire/configuration de base Remise sur volume | 5.29 € *Prix unitaire/configuration de base Remise sur volume |
| Délai d'expédition minimum ： | 6 jours | 5 jours | 5 jours | 6 jours | 6 jours | 5 jours | 5 jours | 6 jours | 6 jours | 5 jours | 6 jours |
| Forme du connecteur | Forme carrée | Forme carrée | - | Forme carrée | - | - | - | Forme carrée | Forme carrée | - | Forme carrée |
| A· B· C | - | - | - | - | - | - | - | - | - | - | - |
| D· E· F | DIN / mini-DIN | DIN / mini-DIN | - | DIN / mini-DIN | - | - | - | - | - | - | - |
| G·H·I | - | - | - | - | - | - | - | - | - | - | - |
| M·N·O | - | - | - | - | - | - | - | - | - | - | - |
| P· Q· R | - | - | - | - | - | - | - | - | - | - | - |
| S· T· U | - | - | - | - | - | - | - | USB | - | - | - |
| V· W· X | - | - | - | - | - | - | - | - | - | - | XH |
| Nombre | - | - | - | - | - | - | - | - | - | - | - |
| Broche / contact applicable | Mâle (fiche) | Mâle (fiche) | Mâle (fiche) / Femelle (prise) | Mâle (fiche) / Femelle (prise) | Mâle (fiche) / Femelle (prise) | Mâle (fiche) | - | Mâle (fiche) | Mâle (fiche) | Mâle (fiche) / Femelle (prise) | Mâle (fiche) |
| Nombre d'âmes | 128 | 15 ～ 48 | 10 ～ 64 x 2 | 20 ～ 100 | 20 ～ 100 | 96 | 95 ～ 110 | 4 ～ 5 | 3 ～ 100 | 20 ～ 80 | 30 ～ 100 |
| Application | Pour PCB | Pour PCB | Pour PCB | Circuit imprimé à circuit imprimé | Circuit imprimé à circuit imprimé | Pour PCB | Circuit imprimé à circuit imprimé | Pour PCB | Pour PCB | Circuit imprimé à circuit imprimé | Circuit imprimé à circuit imprimé |
| Courant admissible(A) | 2 | 6 ～ 15 | 1 ～ 3 | 2 | 2 | 2 | 1 | 1 | 3 | 0.5 | 0.5 |
| Tension admissible(V) | AC300 | AC380 ～ CA500 | CA250 ～ AC300 | AC300 | AC300 | AC300 | CA500 | AC30 | AC300 | CA125 | CA125 |
| Méthode de connexion des fils | Type soudé | Type soudé | Soudage par pression | Type soudé | - | - | - | Type soudé | - | Soudage par pression | Type soudé |
| Sens de connexion | Angle | Angle | Angle | Angle | Angle | Angle | Angle | Angle | Angle | Angle | Angle |
| Fonction de protection (résistance environnementale) | N/A | N/A | - | N/A | - | - | - | N/A | N/A | - | N/A |
| Norme représentative | - | UL | - | UL / CSA | - | - | - | - | UL | - | UL |
Loading...
Filtrer par:
Affiner la recherche en précisant les spéc./dim.
-
Forme du connecteur
- Forme carrée
-
A· B· C
- Autre
-
D· E· F
- DIN / mini-DIN
- Autre
-
G·H·I
- Autre
-
M·N·O
- Autre
-
P· Q· R
- Autre
-
S· T· U
- USB
-
V· W· X
-
Nombre
- Autre
-
Broche / contact applicable
- Mâle (fiche)
- Femelle (prise)
- Autre
-
Nombre d'âmes
-
Application
-
Courant admissible(A)
-
Tension admissible(V)
-
Méthode de connexion des fils
- Type soudé
- Serti
- Soudage par pression
- Autre
-
Sens de connexion
- Droit
- Angle
-
Fonction de protection (résistance environnementale)
-
Norme représentative
Affiner la recherche en spécifiant le fabricant
-
- HIROSE ELECTRONIC (22)
- OMRON (11)
- MOLEX (2)
- HARTING (1)
- HONDA TSUSHIN KOGYO (1)
- WEIDMUELLER (1)
- FUJIKURA (DDK) (0)
- ERNI (0)
Affiner la recherche en précisant le type de données CAO
-
- 2D
- 3D
Catégories relatives à « Connecteurs entre circuits imprimés »
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.