THK Guides linéaires standard（Précision：Haute qualité）
Affiner la recherche en précisant Type de bloc
-
Standard -
Court -
Large -
Large long -
Long -
Extra long -
Large court
?* À propos du délai d'expédition et des prix
-
Guidages linéaires / type de rail au choix / dimensions des chariots au choix / SRS
THK
A miniature type with a compact structure. Can be mounted in areas in space saving areas, and a part of the LM block has been formed using resin to achieve lightweight.
* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.- Fichiers CAD 2D / 3D disponibles
Délai d'expédition minimum ： 14 jours -
Guides linéaires / dimensions des chariots au choix / matériau au choix / HSR
THK
A standard full-ball type. Incurs load from four directions which allows it to be used in any position. A series with the most abundance in variations in size and shape, etc.
* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.- Fichiers CAD 2D / 3D disponibles
Délai d'expédition minimum ： 14 jours -
Guides linéaires / Rail large / Chariot large / matériau au choix / HRW
THK
A structure with a wide rail width and low center of gravity. HSR It is advantageous when there are Mc moment requirements and is thin compared with.
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· Compact heavy load: A high number of effective balls makes it possible to obtain high rigidity in all directions. Has a wide rail width and can adequately withstand moments with a single shaft.
There is a high rigidity in the horizontal direction and there is no need to for reinforcement such as horizontal pressing due to large secondary moments being incurred on the rail cross-section.
· The self-aligning capability achieved from the unique circular arched-groove front face combination (DF set) makes it possible to absorb the mounting error even when there is a preload incurred, and it is also capable of obtaining a smooth linear motion at a high accuracy.- Fichiers CAD 2D / 3D disponibles
Délai d'expédition minimum ： 14 jours -
Guidages linéaires / version de rail au choix / dimensions des chariots au choix / SRS-G
THK
A full-ball type with not ball retainer on the SRS type.
[Features]
· The LM guide with ball retainer SRS type has a structure that includes two rolling sides on a compact body, which allows the load to be incurred from all sides, and can be used with a single shaft at locations that have limited space requirements and locations that use moment.
· The adoption of the ball retainer has eliminated mutual friction between the balls, which provides excellent high speed, low noise, good sound quality, long life, and being maintenance-free for long periods of time.
· The ball retainer eliminates the mutual friction between the balls, which improves the grease holdability and reduces the raised dust amount.
· The LM block and LM rail both use stainless steel that are highly rust-proof.
· The rail cross-section height is kept low, and it has a compact structure with a single left and right ball row, which allows it be mounted in space saving areas.
· This is a lightweight type where a part (around the ball escape hole, etc.) of the LM block has been insert formed using resin materials.- Fichiers CAD 2D / 3D disponibles
Délai d'expédition minimum ： 19 jours -
Guides linéaires / dimensions des chariots au choix / matériau au choix / SHS
THK
A standard type of LM guide with ball retainer. Incurs load from four directions which allows it to be used in any position.
* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.- Fichiers CAD 2D / 3D disponibles
Délai d'expédition minimum ： 14 jours -
Guides linéaires / dimensions de la voiture au choix / matériau au choix / SR
THK
A type with a compact structure that has a low cross-section height and is resilient against loads in the radial direction. More advantageous than HSR when incurring loads in the radial direction (longevity, precision, rigidity, etc.).
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.
· Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
· A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.
· This is a self-aligning type that can easily absorb error in the level precision and the degree of parallelism for the two shafts, which is capable of highly precise and smooth movements.
· The retainer part on each of the ball rows can obtain rolling motions with limited sound because of the balls being designed to smoothly circulate using the guiding part on the end plate.
· It is possible to maintain precision of long periods of time, have excellent abrasion resistance and limited differential slipping even when there is a preload or uneven loads.
· LM block, LM rail, and LM rail are all compatible with stainless steel.- Fichiers CAD 2D / 3D disponibles
Délai d'expédition minimum ： 14 jours -
Guides linéaires / rail large / chariot large / matériau au choix / SHW
THK
A structure with a wide rail width and low center of gravity. SHS It is advantageous when there are Mc moment requirements and is thin compared with.
[Features]
· A highly rigid LM guide that is capable of superior high speeds, maintenance-free over long periods of time, and having low noise due to the adoption of a ball retainer.
· The SHW, which has a structure with a width LM rail width and a low center of gravity, is ideal for use in locations where there are space limitations, and when there are MC moment rigidity requirements.
· Each of the rail rows has been arranged in an array at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and can be used for a wide range of application.
· The self-aligning capability achieved from the unique circular arched-groove front face combination (DF set) makes it possible to absorb the mounting error even when there is a preload incurred, and it is also capable of obtaining a smooth linear motion at a high accuracy.
· The ball retainers eliminate the mutual friction between the balls and holds the lubricant oil (agent) to achieve superior low-dust performance.- Fichiers CAD 2D / 3D disponibles
Délai d'expédition minimum ： 14 jours -
Guides linéaires / dimensions des chariots au choix / Précision / matériau au choix / SSR
THK
Radial type that is strong against loads in the radial direction. More advantageous than SHS when incurring loads in the radial direction (longevity, precision, rigidity, etc.). A stainless steel type not featured with the SHS is also available.
*When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.- Fichiers CAD 2D / 3D disponibles
Délai d'expédition minimum ： 14 jours -
Guide à mouvement linéaire de type entièrement à bille, radial, type SR-M1
THK
High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.- Fichiers CAD 2D disponibles
Délai d'expédition minimum ： 39 jours -
Guide à mouvement linéaire de type entièrement à bille, normes internationales pour hautes températures, type HSR-M1
THK
High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used from any position.
· The LM guide for use in high temperatures can be used in even higher temperatures of up to 150°C as a result of using a unique technology for the materials, heat treatment, and lubricant.
· Can now be used in temperatures of up to 150°C by using stainless steel end rails and end rails that utilize rubber materials for use in high temperatures.
· A dimensional consistency treatment has been applied to achieve excellent dimensional consistency after applying heat or cooling (may thermally expand under high temperatures).
· The LM block, LM rail, and balls all use stainless steel with excellent corrosion resistance, which is ideal for use in clean rooms.
· Uses a grease for use in high temperatures with limited rolling resistance fluctuations resulting from grease even when the temperature fluctuates from a normal temperature to a high temperature.- Fichiers CAD 2D disponibles
Délai d'expédition minimum ： 54 jours -
Guide à mouvement linéaire avec retenue à bille, course limitée, type EPF
THK
A limited stroke type. Smooth movement due to there being no ball circulation. Also has a high rigidity compared with conventional products from a structural standpoint. It is particularly advantageous when there are Mc moment requirements.- Fichiers CAD 2D / 3D disponibles
Délai d'expédition minimum ： 24 jours
| Marque |
|---|
| Série du produit |
| CAD |
| à partir de∗ |
| Délai d'expédition minimum ： |
| Ensemble/élément unique |
| Type de bloc |
| Type de rail |
| Largeur du rail(mm) |
| Hauteur de montage H(mm) |
| Nombre de blocs |
| Matériaux |
| Longueur du rail L(mm) |
| Précharge |
| Précision |
| Numéro de pièce nominal |
| Disposition des billes |
| Retenue |
| Pas du trou de montage de bloc (sens de la largeur)(mm) |
| Pas du trou de montage de bloc (sens de la longueur)(mm) |
| Diamètre du trou de montage de bloc |
| Pas du trou de montage du rail(mm) |
| Diamètre du trou de montage du rail |
|
|
|
|
|
|
|
|
|
|
| |
| Marque | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK |
| Série du produit | Guidages linéaires / type de rail au choix / dimensions des chariots au choix / SRS | Guides linéaires / dimensions des chariots au choix / matériau au choix / HSR | Guides linéaires / Rail large / Chariot large / matériau au choix / HRW | Guidages linéaires / version de rail au choix / dimensions des chariots au choix / SRS-G | Guides linéaires / dimensions des chariots au choix / matériau au choix / SHS | Guides linéaires / dimensions de la voiture au choix / matériau au choix / SR | Guides linéaires / rail large / chariot large / matériau au choix / SHW | Guides linéaires / dimensions des chariots au choix / Précision / matériau au choix / SSR | Guide à mouvement linéaire de type entièrement à bille, radial, type SR-M1 | Guide à mouvement linéaire avec retenue à bille, course limitée, type EPF | |
| CAD |
|
|
|
|
|
|
|
|
|
|
|
| à partir de∗ | - | - | - | - | - | - | - | - | - | - | - |
| Délai d'expédition minimum ： | 14 jours | 14 jours | 14 jours | 19 jours | 14 jours | 14 jours | 14 jours | 14 jours | 39 jours | 54 jours | 24 jours |
| Ensemble/élément unique | Ensemble | Ensemble | Ensemble | Ensemble | Ensemble | Ensemble | Ensemble | Ensemble | Ensemble | Ensemble | Ensemble |
| Type de bloc | Standard / Large / Long | Standard / Large | Large | Standard | Standard / Large | Standard / Large / Large court | Large | Standard / Large | Standard / Large / Large court | Standard / Large | Standard |
| Type de rail | Standard / Large | Standard | Large | Standard | Standard | Standard | Large | Standard | Standard | Standard | Standard |
| Largeur du rail(mm) | 9 ～ 42 | 15 ～ 63 | 18 ～ 120 | 9 | 15 ～ 63 | 15 ～ 70 | 18 ～ 90 | 15 ～ 34 | 15 ～ 34 | 15 ～ 28 | 7 ～ 15 |
| Hauteur de montage H(mm) | 9 ～ 25 | 28 ～ 90 | 12 ～ 60 | 10 | 24 ～ 90 | 24 ～ 85 | 12 ～ 50 | 24 ～ 48 | 24 ～ 48 | 24 ～ 45 | 8 ～ 16 |
| Nombre de blocs | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 |
| Matériaux | Acier inoxydable | Acier au carbone / Acier inoxydable | Acier au carbone / Acier inoxydable | Acier inoxydable | Acier au carbone | Acier au carbone / Acier inoxydable | Acier au carbone / Acier inoxydable | Acier au carbone / Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable |
| Longueur du rail L(mm) | 32 ～ 2000 | 64 ～ 3000 | 38 ～ 3000 | 32 ～ 1240 | 71 ～ 3000 | 47 ～ 3000 | 38 ～ 3000 | 47 ～ 3000 | 47 ～ 1500 | 67 ～ 1500 | 33 ～ 110 |
| Précharge | Standard / Précharge légère | Standard / Précharge légère / Précharge moyenne | Standard / Précharge légère / Précharge moyenne | Standard / Précharge légère | A / Standard / Précharge légère / Précharge moyenne | Standard / Précharge légère / Précharge moyenne | Standard / Précharge légère / Précharge moyenne | Standard / Précharge légère | Standard / Précharge légère / Précharge moyenne | Standard / Précharge légère / Précharge moyenne | - |
| Précision | Haute qualité | Haute qualité | Haute qualité | Haute qualité | Haute qualité | Haute qualité | Haute qualité | Haute qualité | Haute qualité | Haute qualité | Haute qualité |
| Numéro de pièce nominal | 7W ～ 25 | 15 ～ 65 | 12 ～ 60 | 9X | 15 ～ 65 | 15 ～ 70 | 12 ～ 50 | 15 ～ 35 | 15 ～ 35 | 15 ～ 30 | 7 ～ 15 |
| Disposition des billes | Standard | 4 rangs, circulaire | 4 rangs, circulaire | Standard | 4 rangs, circulaire | 4 rangs, circulaire | 4 rangs, circulaire | 4 rangs, circulaire | 4 rangs, circulaire | 4 rangs, circulaire | 4 rangs, circulaire |
| Retenue | Disponible | Sans objet | Sans objet | Sans objet | Disponible | Sans objet | Disponible | Disponible | Sans objet | Sans objet | Disponible |
| Pas du trou de montage de bloc (sens de la largeur)(mm) | 15 ～ 45 | 11.5 ～ 142 | 21 ～ 180 | 15 | 26 ～ 142 | 26 ～ 90 | 21 ～ 144 | 26 ～ 60 | 26 ～ 82 | 11.5 ～ 72 | 12 ～ 25 |
| Pas du trou de montage de bloc (sens de la longueur)(mm) | 10 ～ 35 | 18 ～ 120 | 12 ～ 80 | 10 | 26 ～ 120 | 26 ～ 90 | 15 ～ 80 | 26 ～ 50 | 26 ～ 50 | 18 ～ 60 | 13 ～ 25 |
| Diamètre du trou de montage de bloc | 3 ～ 6 | 4 ～ 16 | 3 ～ 10.5 | 3 | 4 ～ 16 | 4 ～ 16 | 2.5 ～ 10 | 4 ～ 8 | 4 ～ 9 | 4 ～ 10 | 2 ～ 3 |
| Pas du trou de montage du rail(mm) | 20 ～ 60 | 60 ～ 150 | 40 ～ 105 | 20 | 60 ～ 150 | 60 ～ 150 | 40 ～ 80 | 60 ～ 80 | 60 ～ 80 | 60 ～ 80 | 15 ～ 40 |
| Diamètre du trou de montage du rail | 3.5 ～ 7 | 4.5 ～ 18 | 4.5 ～ 11 | 3.5 | 4.5 ～ 18 | 3.5 ～ 18 | 4.5 ～ 9 | 4.5 ～ 9 | 3.5 ～ 9 | 4.5 ～ 9 | 2.4 ～ 3.5 |
Loading...
Filtrer par:
Affiner la recherche en précisant les spéc./dim.
-
Ensemble/élément unique
- Ensemble
- Bloc uniquement
- Rail uniquement
-
Type de rail
-
Standard -
Large
-
-
Largeur du rail(mm)
-
Hauteur de montage H(mm)
-
Nombre de blocs
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
-
Matériaux
- Acier au carbone
- Acier inoxydable
si ce sont des produits en paquet, les matériaux de bloc et de rail seront identiques
-
Longueur du rail L(mm)
- 25
- 35
- 40
- 45
- 50
- 55
- 70
- 75
- 80
- 85
- 95
- 100
- 110
- 115
- 120
- 130
- 135
- 140
- 145
- 150
- 155
- 160
- 165
- 170
- 175
- 190
- 195
- 200
- 215
- 220
- 230
- 235
- 240
- 245
- 255
- 260
- 270
- 275
- 280
- 290
- 295
- 310
- 315
- 320
- 335
- 340
- 345
- 350
- 355
- 360
- 370
- 390
- 395
- 400
- 420
- 430
- 440
- 445
- 460
- 470
- 495
- 510
- 520
- 545
- 550
- 560
- 570
- 580
- 590
- 595
- 600
- 620
- 630
- 640
- 645
- 670
- 680
- 695
- 700
- 720
- 760
- 800
- 820
- 840
- 880
- 920
- 940
- 1000
- 1040
- 1060
- 1080
- 1120
- 1160
- 1180
- 1200
- 1240
- 1300
- 1320
- 1360
- 1400
- 1420
- 1440
- 1480
- 1520
- 1540
- 1560
- 1600
- 1640
- 1660
- 1720
- 1780
- 1800
- 1840
- 1880
- 1900
- 1960
- 2000
[32-3000/1mmunités]
-
Précharge
- Standard
- Précharge légère
- Précharge moyenne
- Dégagement
- Précharge lourde
Veuillez confirmer les normes de précision de chaque fabricant
-
Précision
- Qualité standard
- Haute qualité
- Qualité de précision
- Qualité de haute précision
- Qualité d’ultra haute précision
Veuillez confirmer les normes de précision de chaque fabricant
-
Numéro de pièce nominal
-
Disposition des billes
-
Retenue
-
Pas du trou de montage de bloc (sens de la largeur)(mm)
-
Pas du trou de montage de bloc (sens de la longueur)(mm)
-
Diamètre du trou de montage de bloc
-
Pas du trou de montage du rail(mm)
-
Diamètre du trou de montage du rail
Affiner la recherche en spécifiant le fabricant
-
- MISUMI (20)
- THK (11)
- BOSCH REXROTH (8)
- SBC (1)
- OZAK (0)
- IKO (0)
- INA (0)
- SKF (0)
- GANTER (0)
- SCHNEEBERGER (0)
Affiner la recherche en précisant le type de données CAO
-
- 2D
- 3D
Affiner la recherche en précisant le délai
-
- Tous les articles
- Jour même
- 4 jours ou moins
- 5 jours ou moins
- 6 jours ou moins
- 7 jours ou moins
- 8 jours ou moins
- 9 jours ou moins
- 10 jours ou moins
- 11 jours ou moins
- 12 jours ou moins
Catégories relatives à « Guides linéaires standard »
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.