Raccords en résine fluorée（D.E. de tube applicable (pouces) D2：3/8）
| Nombre de jours d'expédition |
|
|---|
?* À propos du délai d'expédition et des prix
-
Raccord PILLAR de type Super 300, connecteur mâle
PILLAR
The SUPER-300 type PILLAR fitting is completely a new joint made of fluororesin, which can fully and securely meet the sophisticated and diversified requests such as "Safety," "Cleanliness," "Application at high temperature," "Compatibility to piping size," etc., the essential items in semiconductor liquid crystal manufacturing process.
◆ Reduction in tightening torque by updated sealing mechanism
Since the sealing force acts in radial direction as well as in thrust direction, this fitting is so constructed as to provide the stabilized sealing performance for a long time within wide temperature range, and to be resistible against heat cycle.
◆ Greatly enhanced workability due to simplified tightening control
The adoption of gauge ring made it possible to execute the union nut tightening control with sound, tactile impression and visual method, which greatly improved the workability. Further it has eliminated the fluctuation in execution such as insufficient tightening, excessive tightening, etc., thus assuring the safe and stabilized performance.
◆ Excellent sealing performance
Exhibits high sealing performance against each chemical liquid. Even the removal liquid having high penetration performance will not be oozed out.
◆ Radical reduction in micro-bubble and liquid accumulation
Since the flow passage sectional area is little decreased due to tightening of union nut, the flow passage will not be interfered. Besides, the micro-bubble/liquid accumulation was radically reduced due to adoption of special shape sleeve.
◆ high working pressure/temperature
The maximum working temperature is 200°C, and the tube holding strength is over the burst pressure of tube.Configurer maintenantà partir de∗ ： 69.93 € Délai d'expédition minimum ： 13 jours *Prix unitaire/configuration de base
-
LVN, Vis de réglage d'amortissement haute pureté en fluoropolymère
SMC
A fluoropolymer fitting with an integrated fitting construction.
[Features]
· Fluid adjustment range: 0 to 12 l/min.
· Integrated fitting construction: Hyper fitting, LQ2 series is used.
· Triple-seal construction.
· Nut locking mechanism.
· High flexural strength.
· Different tubing sizes can be selected.
· Material: New PFA.- Fichiers CAD 2D / 3D disponibles
Configurer maintenantà partir de∗ ： 220.74 € Délai d'expédition minimum ： 84 jours *Prix unitaire/configuration de base
-
Raccord PILLAR de type Super 300, coude mâle
PILLAR
The SUPER-300 type PILLAR fitting is completely a new joint made of fluororesin, which can fully and securely meet the sophisticated and diversified requests such as "Safety," "Cleanliness," "Application at high temperature," "Compatibility to piping size," etc., the essential items in semiconductor liquid crystal manufacturing process.
◆ Reduction in tightening torque by updated sealing mechanism
Since the sealing force acts in radial direction as well as in thrust direction, this fitting is so constructed as to provide the stabilized sealing performance for a long time within wide temperature range, and to be resistible against heat cycle.
◆ Greatly enhanced workability due to simplified tightening control
The adoption of gauge ring made it possible to execute the union nut tightening control with sound, tactile impression and visual method, which greatly improved the workability. Further it has eliminated the fluctuation in execution such as insufficient tightening, excessive tightening, etc., thus assuring the safe and stabilized performance.
◆ Excellent sealing performance
Exhibits high sealing performance against each chemical liquid. Even the removal liquid having high penetration performance will not be oozed out.
◆ Radical reduction in micro-bubble and liquid accumulation
Since the flow passage sectional area is little decreased due to tightening of union nut, the flow passage will not be interfered. Besides, the micro-bubble/liquid accumulation was radically reduced due to adoption of special shape sleeve.
◆ high working pressure/temperature
The maximum working temperature is 200°C, and the tube holding strength is over the burst pressure of tube.Configurer maintenantà partir de∗ ： 97.09 € Délai d'expédition minimum ： 13 jours *Prix unitaire/configuration de base
-
- En promotion
LQ1T, Raccord d'une grande pureté en fluoropolymère, connexions à l'aide d'un tuyau, Té égal
SMC
A fluoropolymer fitting with a tube holding section on the nut that utilizes a 2-stage system for securely holding tubes in place.
[Features]
· Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· Shows strong resistance to tube bending and deformation. The tube support allows it to withstand use with lateral loads.
· Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
· For use at 200°C. The trapezoidal thread prevents the angled insertion of nuts.
· The reducer system allows you to switch tube sizes without having to change the body itself.- Fichiers CAD 2D / 3D disponibles
Configurer maintenantà partir de∗ ： 55.31 € Prix spécial Délai d'expédition minimum ： 26 jours *Prix unitaire/configuration de base
-
- En promotion
LQ1U, Raccord spécialisé, haute pureté, connexion de tube, union
SMC
A union with outstanding flow-through characteristics with minimized liquid pooling.
[Features]
· Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Fichiers CAD 2D / 3D disponibles
Configurer maintenantà partir de∗ ： 36.47 € Prix spécial Délai d'expédition minimum ： 26 jours *Prix unitaire/configuration de base
-
Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ1 / Raccord avec réducteur / Taille en pouces
SMC
A fluoropolymer fitting with a tube holding section on the nut that utilizes a 2-stage system for securely holding tubes in place.
[Features]
· The quadruple-sealing construction provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening. The trapezoidal thread allows for the application of high levels of torque.
· Strong resistance to tube bending and deformation.
· Easy nut fastening
· Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Fichiers CAD 2D / 3D disponibles
Configurer maintenantà partir de∗ ： 294.19 € Délai d'expédition minimum ： 26 jours *Prix unitaire/configuration de base
-
Raccords en fluoroplastique / Raccords en fluoropolymère / Série LQ1 / Té / pouce
SMC
A reducing type fluoropolymer union tee fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.Configurer maintenantà partir de∗ ： 54.87 € Délai d'expédition minimum ： 26 jours *Prix unitaire/configuration de base
-
Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ1 / Raccord réducteur / taille impériale
SMC
A reducing-type fluoropolymer union fitting for use at temperatures of up to 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Fichiers CAD 2D / 3D disponibles
Configurer maintenantà partir de∗ ： 158.44 € Délai d'expédition minimum ： 26 jours *Prix unitaire/configuration de base
-
Raccords en fluoropolymère / Raccords en fluoropolymère / Série LQ1 / Rallonge de tube / Réducteur / Taille en pouces
SMC
A fluoropolymer fitting boasting outstanding flow-through characteristics with minimized liquid pooling.
[Features]
· SMC's unique quadruple sealing construction provides highly reliable performance against the leakage of liquids.
· For use at 200°C.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· The tube support allows it to withstand use with lateral loads.
· Simply screw in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.
· The reducer system allows you to switch tube sizes without having to change the body itself.Configurer maintenantà partir de∗ ： 148.61 € Délai d'expédition minimum ： 26 jours *Prix unitaire/configuration de base
-
- En promotion
Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ3 / Raccord réducteur / Taille en pouces
SMC
Fluoropolymer fittings from SMC Corporation.
[Features]
· Flare-type collet construction.
· Triple-seal construction.
· Ease of installation.
· Excellent flow-through characteristics.
· Excellent heat resistance.
· Can be used at 200°C.
[Applications]
· For joining tubes during piping assembly.- Fichiers CAD 2D / 3D disponibles
Configurer maintenantà partir de∗ ： 50.47 € Prix spécial Délai d'expédition minimum ： 26 jours *Prix unitaire/configuration de base
-
Raccords en fluoropolymère / Raccords en fluoropolymère / Série LQ3 / Raccords avec réducteur / Taille en pouces
SMC
Fluoropolymer fittings from SMC Corporation.
[Features]
· Flare-type collet construction.
· Triple-seal construction.
· Ease of installation.
· Excellent flow-through characteristics.
· Excellent heat resistance.
· Can be used at 200°C.
[Applications]
· For joining tubes during piping assembly.- Fichiers CAD 2D / 3D disponibles
Configurer maintenantà partir de∗ ： 44.84 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Raccords en fluoropolymère / Raccords en fluoropolymère / Série LQ3 / Té / Taille en pouces
SMC
Fluoropolymer fittings from SMC Corporation.
[Features]
· Flare-type collet construction.
· Triple-seal construction.
· Ease of installation.
· Excellent flow-through characteristics.
· Excellent heat resistance.
· Can be used at 200°C.
[Applications]
· For joining tubes during piping assembly.- Fichiers CAD 2D / 3D disponibles
Configurer maintenantà partir de∗ ： 49.98 € Délai d'expédition minimum ： 26 jours *Prix unitaire/configuration de base
| Marque |
|---|
| Série du produit |
| CAD |
| à partir de∗ |
| Délai d'expédition minimum |
| Type |
| Matériau du corps principal |
| Type de connexion |
| Type de connexion filetage à tuyau |
| Type de connexion multipoint filetage à tuyau |
| Type de connexion à diam. identique tuyau à tuyau |
| Type de connexion à diam. différent tuyau à tuyau |
| Type de connexion saillante pour tuyau / tube |
| Type de composant associé |
| Diam. extérieur du tube applicable (mm) D (D1) |
| D.E. de tube applicable (mm) D2 |
| D.E. de tube applicable (mm) D3 |
| D.E. de tube applicable (pouces) D (D1) |
| D.E. de tube applicable (pouces) D2 |
| D.E. de tube applicable (pouces) D3 |
| D.I. du tube applicable(mm) |
| Type de vis d'assemblage M (M1) |
| Vis d'assemblage nominale M (M1) |
| Température maximale de fonctionnement(°C) |
|
|
|
|
|
|
|
|
|
|
|
| |
| Marque | PILLAR | SMC | PILLAR | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC |
| Série du produit | LVN, Vis de réglage d'amortissement haute pureté en fluoropolymère | LQ1T, Raccord d'une grande pureté en fluoropolymère, connexions à l'aide d'un tuyau, Té égal | LQ1U, Raccord spécialisé, haute pureté, connexion de tube, union | Raccords en fluoroplastique / Raccords en fluoropolymère / Série LQ1 / Té / pouce | Raccords en fluoropolymère / Raccords en fluoropolymère / Série LQ3 / Té / Taille en pouces | |||||||
| CAD |
|
|
|
|
|
|
|
| ||||
| à partir de∗ | 69.93 € *Prix unitaire/configuration de base | 220.74 € *Prix unitaire/configuration de base | 97.09 € *Prix unitaire/configuration de base | 55.31 € Prix spécial *Prix unitaire/configuration de base En promotion | 36.47 € Prix spécial *Prix unitaire/configuration de base En promotion | 294.19 € *Prix unitaire/configuration de base | 54.87 € *Prix unitaire/configuration de base | 158.44 € *Prix unitaire/configuration de base | 148.61 € *Prix unitaire/configuration de base | 50.47 € Prix spécial *Prix unitaire/configuration de base En promotion | 44.84 € *Prix unitaire/configuration de base | 49.98 € *Prix unitaire/configuration de base |
| Délai d'expédition minimum | 13 jours | 84 jours | 13 jours | 26 jours | 26 jours | 26 jours | 26 jours | 26 jours | 26 jours | 26 jours | 7 jours | 26 jours |
| Type | Corps principal du raccord | Composants associés | Corps principal du raccord | Corps principal du raccord | Corps principal du raccord | Corps principal du raccord | Corps principal du raccord | Corps principal du raccord | Corps principal du raccord | Corps principal du raccord | Corps principal du raccord | Corps principal du raccord |
| Matériau du corps principal | PFA | PFA | PFA | PFA | PFA | PTFE | PTFE / PFA | PTFE | PTFE | PFA | PFA | PFA |
| Type de connexion | Filetage <-> tube | - | Filetage <-> tube | Connexion tuyau <-> tuyau, diam. différent | Connexion tuyau <-> tuyau, diam. différent | Connexion tuyau <-> tuyau, diam. différent | Connexion tuyau <-> tuyau, diam. différent | Connexion tuyau <-> tuyau, diam. différent | Tuyau <=> partie saillante de tube | Connexion tuyau <-> tuyau, diam. différent | Connexion tuyau <-> tuyau, diam. différent | Connexion tuyau <-> tuyau, diam. différent |
| Type de connexion filetage à tuyau | Fileté droit (cranté) | - | Coude à filetage mâle | - | - | - | - | - | - | - | - | - |
| Type de connexion multipoint filetage à tuyau | - | - | - | - | - | - | - | - | - | - | - | - |
| Type de connexion à diam. identique tuyau à tuyau | - | - | - | - | - | - | - | - | - | - | - | - |
| Type de connexion à diam. différent tuyau à tuyau | - | - | - | Raccords union réducteurs en T | Raccord-union réducteur | Raccord coudé réducteur | Raccords union réducteurs en T | Raccord-union réducteur | - | Raccord-union réducteur | Raccord coudé réducteur | Raccords union réducteurs en T |
| Type de connexion saillante pour tuyau / tube | - | - | - | - | - | - | - | - | En saillie sur le tube, raccords union coudés | - | - | - |
| Type de composant associé | Écrou | Autres | Écrou | - | - | - | - | - | - | - | - | - |
| Diam. extérieur du tube applicable (mm) D (D1) | - | 6 ～ 12 | - | - | 6 ～ 8 | - | - | - | - | - | - | - |
| D.E. de tube applicable (mm) D2 | - | - | - | - | - | - | - | - | - | - | - | - |
| D.E. de tube applicable (mm) D3 | - | - | - | - | - | - | - | - | - | - | - | - |
| D.E. de tube applicable (pouces) D (D1) | 1/2 | 1/2 ～ 1/4 | 1/2 | 1/2 ～ 1/4 | - | 1 ～ 3/4 | 1 ～ 3/8 | 3/4 | 1/2 ～ 1/4 | 1/2 ～ 3/4 | 1/2 ～ 3/4 | 1/2 ～ 3/8 |
| D.E. de tube applicable (pouces) D2 | 3/8 | 3/8 | 3/8 | 3/8 | 3/8 | 3/8 | 3/8 | 3/8 | 3/8 | 3/8 | 3/8 | 3/8 |
| D.E. de tube applicable (pouces) D3 | - | - | - | - | - | - | 1 ～ 3/8 | - | - | - | - | 1/2 ～ 3/8 |
| D.I. du tube applicable(mm) | - | - | - | - | - | - | - | - | - | - | - | - |
| Type de vis d'assemblage M (M1) | NPT (Mâle) | - | NPT (Mâle) | - | - | - | - | - | - | - | - | - |
| Vis d'assemblage nominale M (M1) | 1/2B | - | 1/2B | - | - | - | - | - | - | - | - | - |
| Température maximale de fonctionnement(°C) | 200 | - | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 150 ～ 200 | 150 ～ 200 | 200 |
Loading...
Filtrer par :
-
Type
- Corps principal du raccord
- Composants associés
-
Matériau du corps principal
- PTFE
- PFA
-
Type de connexion
- Filetage <-> tube
- Filetage <-> tube, raccordement
- Tuyau <=> partie saillante de tube
- Connexion tuyau <-> tuyau, diam. identique
- Connexion tuyau <-> tuyau, diam. différent
- Autres
-
Type de connexion filetage à tuyau
- Filetage mâle droit
- Femelle droit
- Coude à filetage mâle
- Raccord coudé femelle
- Fileté droit (cranté)
-
Type de connexion multipoint filetage à tuyau
- Filetage mâle, raccords en T
- Filetage femelle, raccords en T
- Filetage mâle, raccordements en T
- Filetage femelle, raccordements en T
-
Type de connexion à diam. identique tuyau à tuyau
- Raccord-union droit
- Raccords union coudés
- Raccords-unions en T
- Raccord-union pour montage sur panneau
- Croix
-
Type de connexion à diam. différent tuyau à tuyau
- Raccord-union réducteur
- Raccord coudé réducteur
- Raccords union réducteurs en T
-
Type de connexion saillante pour tuyau / tube
- En saillie sur le tube, raccords union coudés
- En saillie sur le tube, raccords union en T
-
Type de composant associé
- Écrou
- Manchon
- Autres
-
Diam. extérieur du tube applicable (mm) D (D1)
-
D.E. de tube applicable (mm) D2
-
D.E. de tube applicable (mm) D3
-
D.E. de tube applicable (pouces) D (D1)
-
D.E. de tube applicable (pouces) D2
-
D.E. de tube applicable (pouces) D3
-
D.I. du tube applicable(mm)
-
Type de vis d'assemblage M (M1)
-
Vis d'assemblage nominale M (M1)
-
Température maximale de fonctionnement(°C)
Fabricant
Type de données CAO
-
- 2D
- 3D
Catégories relatives à « Raccords en résine fluorée »
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.