Clapets anti-retour pour fluides

?* À propos du délai d'expédition et des prix

• 

  Clapet anti-retour CS-3SSN (pour eau froide / chaude)

  VENN

  Spring-type for apartment buildings, houses, building facilities, etc. (low pressure loss, prevents water hammer)
  
  [Features]
  · For various water supply systems; prevents backflow using back pressure when the pressure of the supply water source decreases due to water supply cutoff, and for maintenance of a reliable and safe water supply.
  · Spring style with a closing valve for back-flow prevention during a water outage; prevents water hammering, delivering excellent safety.
  · Valve body includes a synthetic rubber disk.
  · Usable with warm water up to 90°C.
  · Water can be supplied with low pressure loss.
  · Pipe end cores are used for connectors, as they are made of material that will not rust, thus preventing rust-colored water.
  · The valve body employs a cartridge structure for easy maintenance.
  · Noise is kept to 40 dB or below (at rated flow rate) while water is flowing, roughly the same level of noise produced by standard pipes.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	38.92 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Clapet anti-retour type CS-7N (pour eau froide / chaude)

  VENN

  Ensures a safe and reliable supply of water for various types of water supply systems by preventing backflow (due to backpressure resulting from pressure drops when the supply is cut off). Compliant with the Japan Water Works Association 'JWWA-B-129 Backflow Preventer Valve' standard. A check valve is installed on the inlet end of the mixing valve to ensure the safety of water supply and hot water systems.
  
  [Features]
  ·Allows for easy maintenance, without having to remove the check valve from the pipe.
  • The provision of an inspection hole allows for easy function checks.
  ·Reduces pressure drops.
  • Usable with warm water up to 90°C.
  • Pipe end cores are used for connectors, as they are made of material that won't rust, thus preventing rust-colored water.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	165.33 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  SMC droit, type JIS10K　

  ISHIZAKI

  [Features]
  · Nylon-coated product suitable for water lines used for washing facilities and high-floor construction, etc.
  · JWWA Certified and Registered product.
  · SCS13 material, which is durable, is used for valve rods, valve bodies, upper and lower guides, and valve seats for 10K 40A to 150A.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	473.08 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  SM type droit, type JIS10K　

  ISHIZAKI

  [Features]
  · Standard model that can be manufactured with ductile or bronze in addition to cast iron.
  · Lineup includes a wide range from 10K to 63K.
  · SCS13 material, which is durable, is used for valve rods, valve bodies, upper and lower guides and valve seats for 10K 40A to 150A.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	177.93 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

Loading...