Pieds de réglage（Type de forme de boulon de réglage：Type à montage par boulon d'ancrage avec pied en caoutchouc）

?* À propos du délai d'expédition et des prix

• 

  Pieds de réglage - Type à 2 trous

  MISUMI

  • Remise sur volume

  • Grande quantité possible (D-JIT)

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	9.06 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Pied de nivellement (modèle pour charge lourde / extra-lourde) FPMS

  NABEYA BI-TECH

  Heavy load / super heavy load type leveling foot. The screw is stainless steel and features excellent corrosion resistance.
  
  [Features]
  · Can be used as a light load idler for wires.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	41.15 €
  	Prix spécial
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Pied de nivellement (modèle pour charge lourde / extra-lourde) FPM

  NABEYA BI-TECH

  Heavy load / super heavy load type leveling foot. The screw is made of steel. Outstanding durability.
  
  [Features]
  · Ideal for the leveling of transfer lines, etc.
  · The pad can be tilted up to 15°.
  · Effective for use on slopes.
  · Thread diameters from M10 to M24 are available as standard.
  · FPM-G and FPM-GH come with a rubber disk for slip prevention.
  · FPM and FPM-G are heavy load types.
  · FPM-H and FPM-GH are super heavy load types.
  · Products with a pad diameter equal to or greater than ø80 have two hidden holes for anchor bolts and two guide holes for hole drilling.

  • Remise sur volume

  • Stock

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	22.84 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Dispositifs de réglage pour fixations d'ancrage D-EII / D-EII-ST

  DAIWARASHI

  A standard item adjuster bolt for anchor fixing. Note: Please be advised that the model number in VONA has been changed from "D-E II" to "D-E2."
  
  [Features]
  · Similar to D-A, it is structured so that fixing of the receiver and bolt is performed by placing the bolt protrusion into the receiver and pressing a nut into it.
  · Can easily be fixed using an anchor bolt.
  · Please use an anchor bolt.
  · Please use a 12 mm anchor bolt.
  · Bolts shorter than 12 × 70 are not recommended for complete fixing due to safety concerns.
  · Note: The screw rotates and tilts somewhat.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	7.12 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Dispositifs d'ajustement pour fixations d'ancrage avec réceptacle à nervures renforcées D-EV

  DAIWARASHI

  [Features]
  · It has been pointed out that the receiver of D-E II is easily bent since its thickness is zero. In response to this, the product has been modified to have about twice the strength of the conventional product, not by changing the plate thickness, but by increasing its hardness.
  · A steel plate reinforced type adjuster for which the base for anchor fixing includes ribs.
  · Please be advised that the model number in VONA has been changed from "D-E V" to "D-E5."

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	10.03 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Dispositifs de réglage pour fixations d'ancrage (modèle à base large) D-E-W

  DAIWARASHI

  A medium load type adjuster for anchor fixing in which the base is wide and stable
  
  [Features]
  · By increasing the size and thickness of the pedestal part, the stability after installation and the resistance horizontal shaking of the anchor fixing part have been improved.
  · Note: The screw shaft tilts somewhat

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	20.90 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Dispositifs de réglage avec blocage de vis pour fixation d'ancrage D-J-EII

  DAIWARASHI

  An adjuster for anchor fixing in which the horizontal shaking of the screw shaft part is completely locked. Note: Please be advised that the model number in VONA has been changed from "D-J-E II" to "D-J-E2."
  
  [Features]
  · The structure is such that some space exists between the receiver and bolt.
  · This is the result of our efforts to enable bolts to move smoothly even if the floor surface is somewhat tilted.
  · It has been pointed out in the past that this may cause bolt looseness to occur when the upper portion of a conveyor vibrates, possibly resulting in significant machinery movement caused by shaking when the conveyor stops.
  · It is for this reason that we came up with the D-J type, which is suitable for use when the top portion of machinery such as a conveyor vibrates and moves slightly.
  · Even when a running machine is stopped, the bolts will not move and falling over will not occur.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	8.50 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Pieds de réglage pour surfaces inclinées, fixation d'ancrage D-U-EII

  DAIWARASHI

  An anchor fixing type adjuster for slopes in which the screw shaft part tilts even more. Note: Please be advised that the model number in VONA has been changed from "D-U-E II" to "D-U-E2."
  
  [Features]
  · The receiver part has a larger hole than the D-A type in order to enable it to receive the spherical structure of the upper part.
  · The spherical structure is divided into a sphere and a receiver.
  · The receiver has undergone spherical processing to enable the sphere to moves smoothly.
  · M12/M16/M20 bolts can be used.
  · The angle 35° is when using an M12 bolt, and when using M16/M20, since the hexagonal part contacts the spherical portion, it is limited to about 15°

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	13.08 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

Loading...