XLH, Vanne coudée manuelle pour vide élevé, joint de soufflet de protection (XLH-25)
Détails du produit:
Référence fabricant: XLH-25
Marque: SMC
Prix: 458.96 €
Délai de livraison: 4 jours
Données techniques:
Éléments d'embase: 25
Conductance du son: 14L/S
Matériau de joint: FKM 1349-80
Quantité de fuite: Interne : 1.3 × 10-10, Externe : 1.3 × 10-11 Pa·m3/s
Emplacement de remplacement du joint: Aucun
(i)Remarque
- ■ SMC Product Line
Webpages for products currently without individual pages on this site will be released on an ad-hoc basis.
■ Products Planned for Online Release
Air cylinder-related product pages will be released on this site on an ad-hoc basis.
CQ2/MG types, etc., are already available.
*Vacuum equipment, FRLs, solenoid valves, etc., will also be released on dedicated pages on this site on an ad-hoc basis.
*The information above is correct as of December 2018. - The product images may be representative images only. Refer to the manufacturer's catalog for shape details.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
XLH-25
Aluminum High Vacuum Angle Valve, Manual Type, Bellows Seal, XLH Series Specifications
XLH Series external appearance
| Model | XLH-16 | XLH-25 | XLH-40 | XLH-50 | |
|---|---|---|---|---|---|
| Fluids | Inert gas vacuum | ||||
| Operating Temperature (°C) | 5 to 150 | ||||
| Operating Pressure Pa (abs) | 1 ×; 10-6 to atmospheric pressure | ||||
| Conductance L/s Note 1: | 5 | 14 | 45 | 80 | |
| Amount of leakage Pa·m3/s | Internal | For standard material (FKM): 1.3 ×; 10-10, values at normal temperature and excluding gas permeation | |||
| External | For standard material (FKM): 1.3 ×; 10-11, values at normal temperature and excluding gas permeation | ||||
| Flange Type | KF (NW) | ||||
| Main Material | Main body: aluminum alloy, Bellows: SUS316L, Main parts: stainless steel, FKM (standard sealing material) | ||||
| Surface Treatment | External: hard anodized aluminum, Internal: base material | ||||
| Actuation torque N·m | 0.1 ≤ | 0.15≦ | 0.35≦ | 0.5≦ | |
| Handle revolutions | 5 | 7 | 10 | 13 | |
| Weight (kg) | 0.23 | 0.41 | 1.05 | 1.62 | |
Note 1: Conductance is the same as that of an elbow with the same dimensions.
Note 2: For valve heater specifications, see "Common Option (1) Heater" in the manufacturer's catalog.
Product Drawing
(Unit: mm)
XLH Series dimensional drawing
| Model | A | B | C | D | E Note 1: | F | G | H |
|---|---|---|---|---|---|---|---|---|
| XLH-16 | 40 | 100.5 | 38 | 1 | - | 30 | 17 | 35 |
| XLH-25 | 50 | 114 | 48 | 1 | 12 | 40 | 26 | 41 |
| XLH-40 | 65 | 162.5 | 66 | 2 | 11 | 55 | 41 | 57 |
| XLH-50 | 70 | 179.5 | 79 | 2 | 11 | 75 | 52 | 70 |
Note 1: Dimension E applies when heater option is included. (Lead wire length: approx. 1 m)
Note 2: A, B, and C in the figure above indicate the heater mounting positions. The heater mounting positions differ by the heater type. Refer to the manufacturer's catalog for replacement heater part numbers and mounting positions.
Product Diagram
XLH Series diagram
*Refer to the manufacturer's catalog for maintenance parts.
Product Working Principle
The valve opens by rotating the handle to the left. The handle does not move up and down. The indicator shows whether or not the valve is open or closed.
As the the handle turns to the right, the valve begins to close. The valve will be sealed when you no longer feel the turning force. The sealing force for the valve is provided by spring and is constant.
Product Options Descriptions
- Heater
Simple heating using thermistors. The valve body can be heated to 100°C or 120°C, but this will differ depending on the valve size. The type and number of thermistors used will vary depending on the size and temperature setting. - Indicator
When the valve is open, an orange mark appears towards the center of the name plate.
Notes
- *The body material is A6063, the bellows material is SUS316L and the metal material used for other vacuum parts is SUS304. The standard seal material for vacuum parts is FKM, but other materials can be selected (see section on part number notation). Check that the fluid in use will not damage the selected material.
- *When using with heaters (thermistors), install a device for preventing overheating.
- *Use within the operating pressure range.
- *For gases which cause a large amount of deposits, either heat the valve body or use the type with a heater to prevent deposits in the valve.
- *Refer to the manufacturer's catalog for parts other than those detailed above.
Référence pièce
|
|---|
| XLH-25 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Éléments d'embase | Conductance du son | Matériau de joint | Quantité de fuite (Pa·m3/s) | Emplacement de remplacement du joint | |
|---|---|---|---|---|---|---|---|---|---|
458.96 € | 1 | 4 jours | 25 | 14L/S | FKM 1349-80 | Interne : 1.3 × 10-10, Externe : 1.3 × 10-11 | Aucun |
Loading...
Informations de base
| Type | Soupape à vide manuelle | Application | Unité simple en fonctionnement | Méthode d'installation | Direct |
|---|---|---|---|---|---|
| Nombre de ports | Vanne à 2 ports | Type à commutation | 2 positions, normalement fermé | Type à port de tuyau | Bride |
| Type à bride | KF | Type de joint | Joint à soufflets | Traitement de surface du corps | Externe : aluminium anodisé dur, interne : matériau de base |
| Chauffage Oui / Non | Aucun |
Vous vous trouvez sur la page de XLH, Vanne coudée manuelle pour vide élevé, joint de soufflet de protection, le numéro d'article est le suivant: XLH-25.
Veuillez trouver plus de détails concernant les particularités et les dimensions sous le numéro d'article XLH-25.
Configurer
Propriétés de base
-
Type
- XLH
-
Éléments d'embase
- 16
- 25
-
Conductance du son
-
Matériau de joint
- FKM 1349-80
- EPDM 2101-80
-
Quantité de fuite(Pa·m3/s)
- Interne : 1,3 x 10–8, Externe : 1,3 x 10-9
- Interne : 1.3 × 10-10, Externe : 1.3 × 10-11
-
Emplacement de remplacement du joint
- Aucun
- Joint d´étanchéité de soupape / joint d´étanchéité
-
Filtrer par type de données CAO
- 2D
- 3D
Filtrer par jours d'expédition standard
-
- Tous les articles
- 4 jours ou moins
- 26 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Variantes de ce produit
| Référence pièce |
|---|
| XLH-16 |
| XLH-25-XN1A |
| Référence pièce | Prix unitaire standard | Quantité minimale de commande | Remise sur volume | Jour d'expédition standard ? | Éléments d'embase | Conductance du son | Matériau de joint | Quantité de fuite (Pa·m3/s) | Emplacement de remplacement du joint |
|---|---|---|---|---|---|---|---|---|---|
440.59 € | 1 | 4 jours | 16 | 5L/S | FKM 1349-80 | Interne : 1.3 × 10-10, Externe : 1.3 × 10-11 | Aucun | ||
460.73 € | 1 | 26 jours | 25 | 14L/S | EPDM 2101-80 | Interne : 1,3 x 10–8, Externe : 1,3 x 10-9 | Joint d´étanchéité de soupape / joint d´étanchéité |
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.