Boîtiers en aluminium/plastique（Fonction de protection (résistance environnementale)：NA）

?* À propos du délai d'expédition et des prix

• 

  Boîte à dissipation thermique en aluminium AWA

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  ・An aluminum case that uses a heat-sink shaped aluminum extrusion
  ・A sophisticated design with a silver alumite finish on the panels
  ・The case has a shielding effect. The body-frame interior and the rear faces of the panels are conductive.
  · An insert groove is included inside the body frame enabling the board and chassis to be slid in.
  ・Ideal for use in industrial fan-less computers, measuring instruments, and digital audio amplifiers, etc.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	20.12 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîte plastique à ouverture / fermeture, série OP

  TAKACHI ELECTRONICS ENCLOSURE

  Openable/Closable Plastic Box (OP)
  
  [Features]
  · Small box made of ABS plastic which can be opened and closed.
  · The top cover is hinged and can be opened and closed using one touch.
  · A broad general-purpose box ideally placed indoors and used either on a desktop or mounted on a wall.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	7.44 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîte plastique résistant à la chaleur, série SW-T

  TAKACHI ELECTRONICS ENCLOSURE

  Heat Resistant Plastic Case (SW-T)
  
  [Features]
  - One-touch opening/closing.
  - Large internal space available for use.
  - Small, multi-purpose case.
  - The ABS-resin SW series features 17 models in two different colors: S (light blue) and B (black).
  - The flame-retardant, heat-resistant ABS-resin SW-N series features 13 G (gray) models.
  - The ABS SW-T series features 6 B (black) models.
  - Full line-up of optional parts, including printed circuit boards that fit the case perfectly and parts for board mounting (sold separately).

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	2.18 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîte de commande, série CH

  TAKACHI ELECTRONICS ENCLOSURE

  Control Box (CH)
  
  [Features]
  · The design is sturdy and clean thanks to the use of die-cast aluminum and extruded aluminum.
  · The side plate features a powder coating that confers excellent coating strength.
  · The panel structure includes both screw clamp and inlay options, either of which can be used as the front.
  · Also, machining is easy because of the flat plate.
  · Two color specifications are available and can be used depending on the intended application.
  · The product can be mounted to any arbitrary position due to the sticky rubber legs.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	39.81 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîte en plastique retardateur de flamme, type TWF, avec pied à bride

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  • With flange foot eases installation.
  • 23 sizes of flame-retardant plastic cases, and available in two colors - off-white and dark gray.
  · Equipped with a boss for mounting on a circuit board.
  · May be used with a variety of devices, such as measuring instruments, communication devices, and controllers, etc.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	1.87 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîte en aluminium petit format, série KC

  TAKACHI ELECTRONICS ENCLOSURE

  Small Aluminum Case (KC)
  
  [Features]
  · The KC Series is a series of cases that use aluminum extrusion materials in their bodies, ABS resin in their panels, and have corners with R.
  · The combination of ABS resin and aluminum extruded materials makes for lightweight cases.
  · Panels are stepped at 0.75 mm, which allows for attachment of laminate film.
  · Assembled structure gives it superior workability.
  · Optimal as a hand-type case.
  · 3 types of color specifications are available: light gray and silver/black and silver/black and black.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	14.01 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîte plastique avec couvercle en silicone, série LCS

  TAKACHI ELECTRONICS ENCLOSURE

  Plastic Case with Silicon Cover (LCS)
  
  [Features]
  - Handheld case with silicon cover.
  - The flexible non-slip cover therefore protects devices from falls.
  - Internal case is flame retardant ABS resin (UL94V-0).
  - 8 battery configurations: 2 AA, 3 AA, 4 AA, 2 AAA, 3 AAA, 4 AAA, one 006P (9 V), and no batteries.
  - ⊕ and ⊖ battery terminal symbols included.
  - Use on a variety of hand-held equipment, including measuring instruments, detection instruments, communications devices, and medical devices.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	8.05 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîte de châssis en aluminium universelle, série UC

  TAKACHI ELECTRONICS ENCLOSURE

  Universal Aluminum Sash Case (UC)
  
  [Features]
  - The UC series uses extruded aluminum on the top/bottom covers; it is useful for a broad range of applications, including corner-R mounted electric, electronic, and control equipment.
  - The front and black panel on the GX type have different colors; light gray and dark gray.
  - The top and bottom covers have 2 and 3 grooves respectively in their fronts and backs; use these for transfer panels, sub panels, printed circuit board mounting, etc.
  - Chassis, chassis mounting brackets, panel antishock fixtures, and hexalobular hole mounting slippage prevention screws are available as optional components.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	17.34 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîte en polycarbonate étanche à l'eau / aux poussières à ouverture / fermeture, série WPCP

  TAKACHI ELECTRONICS ENCLOSURE

  Waterproof/Dustproof Polycarbonate Openable/Closeable Box (WPCP)
  
  [Features]
  · This is a box for electric and electronic devices from intermediate sizes to large sizes.
  · This cabinet type openable/closeable box features a protective grade of IP65 (not available in some models) as well as easy maintenance.
  · There are 2 types of top covers, white-gray and clear.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	196.52 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Boîtier de panneau de commande, série FC

  TAKACHI ELECTRONICS ENCLOSURE

  Control Panel Box (FC)
  
  [Features]
  · A total of 700 different general purpose aluminum boxes are available, including a total of 175 different sizes, with 7 different heights, 9 different widths and 6 different depths, as well as 4 different color specifications available.
  · The panel structure includes both a screw-in side and an inlay side, and either side can be placed in front.
  · The frame contains a structure that includes a slide nut, so mounting of a chassis or DIN rail is possible without performing additional work.
  Available color specifications include GS (gray / silver), BS (black corner block), BX (black corner block / frame), and BB (all black).
  · Product can be used in a variety of different applications, including operational boxes, touch panel display cases, etc.
  · Customers who require a custom-sized case should use the 8 - 11P - 16P FCS Series.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	36.82 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîte système avec poignée support, série MSN

  TAKACHI ELECTRONICS ENCLOSURE

  System Case with Step Handle (MSN)
  
  [Features]
  · This series of aluminum sash cases with step handles includes a total of 528 models in 176 sizes, including 8 different heights, 6 different widths, and 5 different depths.
  · The step handle locks at 30° intervals.
  · The step handle can withstand loads of 25 kg.
  · Heat dissipation holes are not included for 160×160, 160×230, 160×280, or 210×160 (case width x depth, mm) top/bottom covers.
  · Accessory screws: M4 x 6, countersunk head trivalent chromate x 4.
  · M4 × 8 pan trivalent chromate × 8.
  · M4 × 10 bind trivalent black chromate × 4.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	84.28 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîte plastique type CSS avec couvercle en silicone

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Small form plastic case with silicon cover.
  · The cover is flexible and does not slip easily, protecting devices from impact due to falling.
  · A smartphone size CSS115 that takes 2 coin batteries (CR2032) and a type that does not use batteries have been newly added.
  · Replacing batteries is easy for the type that takes coin batteries (CR2032).
  Use the included terminal by soldering it on the circuit board.
  · For use with small devices like remote controllers, wireless devices, and simple measuring instruments, etc.
  · Customers can select from 3 sizes, 6 different models, and 12 different color finishes.
  · Silicon covers with and without a front face opening are available.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	4.95 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîte plastique portative CS

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · A smartphone size CS115 that takes 2 coin batteries (CR2032) and an N type that does not use batteries have been newly added.
  · Replacing batteries is easy for the type with space for inserting coin batteries (CR2032). Use the included terminal by soldering it on the circuit board.
  · For use with small devices like remote controllers, wireless devices, simple measuring instruments, etc.
  · Choose from 3 sizes, 6 types, and 2 colors (white/black).

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	1.96 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîte de châssis en aluminium, forme SL

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  • The SL series is a case series with 351 sizes, including height, 13 types, width, eight types, and depth, five types.
  · Case with panel construction that makes machining, silk printing, and carving easy.
  • This is an assembly-type case that can be used even with an independent case, or with a rack-mounted unit.
  • This is a JIS standard rack case using a mount bracket with height of 49, 99, 149, 199, 249, 299 W dimension 430 (431) mm.
  • This is an EIA standard rack case using a mount bracket with height of 44, 88, 132.5, 177, 221.5 W dimension 430 (431) mm.
  • When a side surface is used as the front surface, it becomes a panel case.
  • The panel, frame, and side panel can be combined with silver and black.
  • Drill holes to fasten the mount bracket and tilt stand mounting.
  • In case width × depth, 120×160, 120×230, 160×160, 160×230, 200×160, 260×160 ceiling panel, there is no heat dissipation hole.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	81.56 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîte à crémaillère JIS, série JR

  TAKACHI ELECTRONICS ENCLOSURE

  JIS Rack Case (JR)
  
  [Features]
  · The JR Series is a series of rack cases with 6 heights, 7 depths, and 42 sizes available.
  · Sectional JIS standard rack case of panel construction that makes machining, silk printing, and carving easy to perform.
  · There are 2 types of cases, one is silver (S type) and the other is black (B type).

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	99.53 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Boîte UM3 / UM4 avec compartiment de batterie UM3, série LM

  TAKACHI ELECTRONICS ENCLOSURE

  UM3/UM4 Case with UM3 Battery Box (LM)
  
  [Features]
  · Small battery case, for easy battery replacement.
  · Flame-retardant ABS resin (UL94V-0).
  · Drop-fit cover top surface makes it suitable for numerous applications, such as touch panel sheet attachment.
  · Case thickness has been kept to a minimum, making it optimal for portable equipment.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	10.97 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîte à crémaillère, série MOR

  TAKACHI ELECTRONICS ENCLOSURE

  Rack Case (MOR)
  
  [Features]
  · The MOR Series is a series of assembled rack cases with 7 heights, 4 depths, and 28 sizes available.
  · Lightweight type made completely from aluminum.
  · Both the top cover and the bottom cover lack heat dissipation holes.
  · There is an assortment of three color types; gray and light gray (panel HL silver), all black (panel HL black), and black (panel HL silver).
  · Case has superior design characteristics: rounded corners providing a soft feel and screws not exposed on the surface.
  · Flat structure mated to frame for both front panel and rear panel so machining can be performed easily.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	115.16 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Boîte système avec poignée à bande, série MSY

  TAKACHI ELECTRONICS ENCLOSURE

  System Case with Band Handle (MSY)
  
  [Features]
  · Series of aluminum chassis cases with band handles. 480 models available, with 8 heights, 6 widths, 4 depths, and 160 sizes.
  · Has a plastic band handle to provide a sense of unity with the case.
  · The handle can withstand a load of 20 kg.
  · For cases with and depth dimensions of 160×230 or 160×280, the top and bottom covers lack heat dissipation holes.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	85.42 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîte système métallique, série MS

  TAKACHI ELECTRONICS ENCLOSURE

  Metal System Case (MS)
  
  [Features]
  - The MS Series is a series of assembled system cases. There are 528 models available, with 8 heights, 6 widths, 5 depths, and 176 sizes.
  · Superior design characteristics include rounded corners providing a soft feel and screws not exposed on the surface.
  · Flat structure mated to frame for both front and rear panels so forming can be performed easily.
  - Top and bottom covers are shared, so the top cover, which has heat dissipation holes, can also be used as a bottom cover.
  - Optional rack mounting bracket attached, and can be used as a rack-mounted case.
  - Three color specifications: two-tone coloring with midtone gray and light gray (G Type), all black (B Type), and silver panel services (BS Type).
  - Use to fit your application.
  - For cases with width and depth dimensions of 160×160, 160×230, 160×280, or 210×160 mm, the top and bottom covers lack heat dissipation holes.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	84.25 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîte métallique, série SRDSL

  TAKACHI ELECTRONICS ENCLOSURE

  Metal Case (SRDSL)
  
  [Features]
  · The SRDSL Series is a series of aluminum chassis that are suited for vacuum tube stereo power amplifiers and tabletop control boxes.
  · The top panel has a high-quality hairline alumite finish, and is available in 2 colors: champagne gold and silver.
  · The main body frame has a welded aluminum integrated structure, making it lightweight and easy to assemble.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	98.13 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Boîtier en fonte d'aluminium, série TD

  TAKACHI ELECTRONICS ENCLOSURE

  Aluminum Die Cast Box (TD)
  
  [Features]
  · 39 models with 13 sizes and 3 types of color specifications are available.
  · Box with superior impact resistance.
  · Thin and clean design with corner R.
  · Unprocessed N type can also be used as a conduction box.
  · Small, round design.
  · Available unprocessed and in standard colors, with 2 types of paint finish (light gray and black).

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	11.86 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîte en plastique retardateur de flamme, série TWN

  TAKACHI ELECTRONICS ENCLOSURE

  Flame-retardant Plastic Case (TWN)
  
  [Features]
  · Small general-purpose plastic case with screw anchor configuration.
  · Material properties: TW Series ABS resin in a total of 26 sizes with 2 color specifications of G (light gray) and B (black), and a TWN Series flame-retardant ABS resin in a total of 23 sizes with a color specification of W (off-white).
  · Equipped with a boss for mounting on a circuit board.
  · May be used with a variety of devices, such as measuring instruments, communication devices, and handheld controllers, etc.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	1.71 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîte à crémaillère EIA série YER

  TAKACHI ELECTRONICS ENCLOSURE

  EIA rack case (YER)
  
  [Features]
  - Stronger panels on the YER series; effective width is now 424 mm.
  - More effective area inside the case provided.
  - Panels available in 2 colors: silver and black.
  - EIA standard rack case with panels, sides and top and bottom plates made of aluminum. Assembly makes machining, silk printing, and carving easy to perform.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	91.85 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîte à crémaillère EIA série ER

  TAKACHI ELECTRONICS ENCLOSURE

  EIA Rack Case (ER)
  
  [Features]
  · The ER Series is a series of rack cases with 5 heights, 7 depths, and 35 sizes available.
  · Sectional EIA standard rack case of panel construction that makes machining, silk printing, and carving easy to perform.
  · There are 2 types of cases, one is silver (S type) and the other is black (B type).

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	102.12 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîtier de commande avec poignée, série FCH

  TAKACHI ELECTRONICS ENCLOSURE

  Control Box with Handle
  
  [Features]
  - A total of 46 aluminum boxes are available, including 23 different sizes, 2 different heights, 5 different widths and 5 different depths.
  - Attached handle makes it easy to carry around.
  - Handle tolerates loads of up to 25 kgf.
  - Simple design, with the frame made of extruded aluminum and the corner elements made of ABS resin.
  - Panel structure includes both a screw-in and an inlay side; either side can be placed in front.
  - Frame structure includes a slide nut for mounting a chassis or DIN rail.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	68.04 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîte plastique portative, série GHA

  TAKACHI ELECTRONICS ENCLOSURE

  Hand-Held Plastic Case (GHA)
  
  [Features]
  - Handheld plastic case available in a total of 11 sizes.
  - Models that accommodate storage of AA, AAA and 9V batteries are available.
  - Two colors are available: white gray and black.
  - Ideal for use with small handheld wireless communications devices and measuring instruments.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	5.07 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîte de châssis en aluminium type dissipateur thermique vertical, série HY

  TAKACHI ELECTRONICS ENCLOSURE

  Vertical Heat Sink Type Aluminum Sash Case (HY)
  
  [Features]
  · Surface treatment offers hair line processing with a luxurious feel and superior design characteristics.
  · Natural air-cooled case with vertical heatsink shape that accomodates heat countermeasures.
  · A total of 40 different models in 20 different sizes are available, including 5 different heights, 4 different widths and 1 depth.
  · A very sturdy case made of aluminum extruded material.
  · Case with few structural parts that is easy to assemble.
  · Heat sink surface is flat, making installation easy.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	95.74 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîte plastique, série KW

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Plastic case (KW)

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	1.98 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîte système avec poignée à bande, série MOY

  TAKACHI ELECTRONICS ENCLOSURE

  System Case with Band Handle (MOY)
  
  [Features]
  · Series of aluminum cases with band handles includes a total of 480 models in 160 sizes, including 8 different heights, 6 different widths and 4 different depths.
  · All aluminum and lightweight, making it ideal for equipment such as portable measuring instruments.
  · A plastic band handle to provide a sense of unity with the case.
  · The handle can withstand a load of 20 kg.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	83.05 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Boîte à crémaillère, série MSR

  TAKACHI ELECTRONICS ENCLOSURE

  Rack Case (MSR)
  
  [Features]
  · The MSR series features a total of 28 differently sized cases requiring assembly, with seven different heights and four different depths available.
  · There is an assortment of three color types: two-tone coloring with midtone gray and light gray (panel – HL silver), all black (panel – HL black), and black (panel – HL silver).
  · Superior design characteristics include rounded corners providing a soft feel and screws not exposed on the surface.
  · Flat structure mated to frame for both front panel and rear panel so forming can be performed easily.
  - The top and bottom covers are interchangeable, so the cover with heat dissipation holes (upper cover) can be used as a bottom cover.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	120.20 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Boîte de châssis en aluminium, série OS

  TAKACHI ELECTRONICS ENCLOSURE

  Aluminum Sash Case, 351 Sizes and 1404 Models (OS)
  
  [Features]
  · Size accommodates full aluminum rack storage and can be used as a rack unit case by attaching the mount bracket.
  · The prefabricated design makes additional processing / machining of the panel, side plate or top plate easy.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	89.32 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîte de châssis en aluminium avec panneau amovible, série POS

  TAKACHI ELECTRONICS ENCLOSURE

  Removable Panel Aluminum Sash Case (POS)
  
  [Features]
  · POS Series case allows for the panel to be removed via sleeve screws.
  · This prefabricated case can be used as an independent housing or as a rack mounting unit case (with W dimension of 430 or 431).
  · Both silver and black are available for the panel, side board, frame, top board and bottom board.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	93.35 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîte de châssis en aluminium avec panneau amovible, série PSL

  TAKACHI ELECTRONICS ENCLOSURE

  Removable Panel Aluminum Sash Case (PSL)
  
  [Features]
  · PSL Series case allows for the panel to be removed via sleeve screws.
  · This prefabricated case can be used as a rack mounted unit case via a mounting bracket.
  · Both silver and black are available for the panel, side board, and frame.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	91.35 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Coque de téléphone portable, série PU

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  - Mobile Phone Case (PU)

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	77.50 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîte à crémaillère EIA, série RUS

  TAKACHI ELECTRONICS ENCLOSURE

  EIA Rack Case (RUS)
  
  [Features]
  · Functionally oriented tack case.
  · Has a simple structure and the front panel can be removed while stored on a rack.
  · Two colors are available for the panel and mounting bracket: beige and black.
  · Usable height can be expanded by reversing the chassis.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	102.60 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîtier en plastique à mécanisme d'ouverture et de fermeture simple pression, série SU

  TAKACHI ELECTRONICS ENCLOSURE

  One-Touch Openable/Closeable Plastic Case (SU)
  
  [Features]
  · This case features a soft and curvy design.
  · A new white model which is suited for indoor installation is now available.
  · Perfect for use as a wall mounted case.
  · A one-touch openable/closeable structure.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	7.36 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Boîte en plastique retardateur de flamme, série SW-N

  TAKACHI ELECTRONICS ENCLOSURE

  Flame Retardant Plastic Case, (SW-N)
  
  [Features]
  · A one-touch opening and closing structure.
  · The internal space is large and useful.
  · A small, multi-purpose case.
  ▪ ABS plastic SW series is available in two colors, namely S (light gray), and B (black), and 17 models, while the flame retardant ABS plastic SW-N series is available in G (gray) and 13 models, and the heat resistant ABS plastic SW-T series is available in B (black) and 6 models.
  · There is also a full line-up of optional parts such as printed circuit boards that fit the case perfectly and parts for board mounting (optional components, sold separately).
  - For that shield type ESW series, refer to 1-111P~112P.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	2.27 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîte fine, série YM

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Thin case (YM)

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	7.49 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Boîte de commande inclinée, série CF

  TAKACHI ELECTRONICS ENCLOSURE

  Sloped Control Box (CF)
  
  [Features]
  - The clean design features a 10° slope which makes operation easy.
  - The panel structure includes both screw clamp and inlay options, either of which can be used as the front.
  · Machining is easy because of the flat plate.
  - The product is extremely lightweight, with the side plates employing flame retardant ABS resin (UL94V-0) and the frame employing extruded aluminum.
  - The product can be mounted in any position due to the sticky rubber legs.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	25.91 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Commande d'ouverture et de fermeture, série FCW

  TAKACHI ELECTRONICS ENCLOSURE

  Opening and Closing Control Box (with key / without key)
  
  [Features]
  - A total of 864 different opening and closing aluminum boxes are available, including 108 different sizes, with 6 different heights, 6 different widths and 7 different depths, 2 flat surface handle types and 4 color specifications.
  - Opening and closing cabinet type allows for easy maintenance.
  - Flat surface handles both with and without keys included are available.
  - The frame structure includes a slide nut, allowing a chassis or DIN rail to be mounted.
  Available color specifications include GS (gray/silver), BS (black corner block), BX (black corner block/frame), and BB (all black).
  - Product can be used in a variety of different applications, including control panel boxes, operational boxes, and touch panel display cases.
  - Customers who require a custom sized case should use the 8 - 17 - 20P FCWS series.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	78.52 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîtier de modules DIN avec fenêtre d'ouverture et de fermeture, série H53

  TAKACHI ELECTRONICS ENCLOSURE

  Opening and Closing Window DIN Module Box
  
  [Features]
  - This box is designed specifically for DIN rail (35-mm) mounting.
  - Assembly and disassembly is possible without the use of screws.
  - Three different front panel types can be selected, depending on the intended application.
  - Attachment of a mounting base or printed baseboard to the inside is possible.
  Neither a mounting base nor printed baseboard are included.
  - PPO material conforming to UL94V-0 standards is included.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	17.46 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîte en aluminium à refroidissement naturel par air, petit format, série HIT

  TAKACHI ELECTRONICS ENCLOSURE

  Natural Air Cooled Small Aluminum Case (HIT)
  
  [Features]
  · The HIT series includes natural air cooled cases which use heat sink shaped extruded aluminum as a body material.
  · The clean design features R on the corners.
  · The case is sturdy due to its extruded aluminum structure.
  · Also ideal for use as an HDD case / digital audio case.
  · Two color specifications are available: silver and black.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	53.81 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîte à crémaillère avec poignée JIS, série JRH

  TAKACHI ELECTRONICS ENCLOSURE

  Rack case with JIS handle (JRH)
  
  [Features]
  · The JRH series is a series of rack cases available in 42 sizes (6 heights and 7 depths).
  · Sectional JIS standard rack case of panel construction that makes machining, silk printing, and carving easy to perform.
  · There are 2 types of cases, one is silver (S type) and the other is black (B type).

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	111.47 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Boîte plastique portative, série LC

  TAKACHI ELECTRONICS ENCLOSURE

  Handheld Plastic Case (LC)
  
  [Features]
  - This handheld case features a sharp design, including tapered elements.
  · The case material is flame retardant ABS resin (UL94V-0).
  · Allows for 8 battery configurations: 2 AA batteries, 3 AA batteries, 4 AA batteries, 2 AAA batteries, 3 AAA batteries, 4 AAA batteries, one 006P (9 V) battery, or no batteries.
  ▪ Includes battery terminal symbols (⊕ and ⊖).
  - Can be used for a variety of hand-held equipment including measuring instruments, detection instruments, communications devices, and medical devices.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	4.12 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîte système avec poignée support, série MON

  TAKACHI ELECTRONICS ENCLOSURE

  System Case with Step Handle (MON)
  
  [Features]
  · This Series of aluminum cases with step handles includes a total of 528 models in 176 sizes, including 8 different heights, 6 different widths and 5 different depths.
  · All-aluminum and lightweight, making it ideal for equipment such as portable measuring instruments.
  · The step handle locks at 30° intervals.
  · The step handle can withstand a load of 25 kg.
  · Accessory screws: M4 × 6, countersunk head trivalent chromate × 4.
  · M4 × 8 pan trivalent chromate × 8.
  · M4 × 10 bind trivalent black chromate × 4.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	82.94 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

Loading...