Connecteurs entre circuits imprimés（Méthode de connexion des fils：Soudage par pression）

?* À propos du délai d'expédition et des prix

• 

  Connecteurs arrière série NX pour cartes d'E / S

  HIROSE ELECTRONIC

  These are back connectors for I/O cards. The low profile design is shielded using a metal shell.
  
  [Features]
  • Ultra-low profile: The mounted height of the receptacle connector is 2.9 mm for an ultra-low profile, allowing mounting on type II I/O cards.
  • Shell is metal: A metal shell was used for better shielding.
  • Structured so that the metal shell always touches before the contacts do.
  • Full ESD shielding: A cover over the mold provides full ESD shielding.
  • Locks securely: An inner lock makes locking more secure.
  • Less wiring work: The plug-side wiring uses AWG #28 pressure contacting (discrete type), so wiring is less work.
  • Sequence structure: The receptacle connector for the I/O card is a 0.8 mm-pitch, SMT-type sequence structure.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	6.30 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur DIN (type à connexion par câble) - XC6

  OMRON

  [Features]
  ・ A connector for cable connection that broadens the applications for DIN connectors.
  ・ There are 2 types of connector available for connecting flat cables and discrete wires, which can then be selected according to the application.
  ・ By using flat cable connectors (XC6D and XC6H types), VME bus configurations (daisy chain) and backplane configurations are possible.
  ・ The connector for discrete wire connections (XC6V type) uses pressure welded contacts and partitioned contact blocks, significantly reducing the work load associated with harnessing.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	28.59 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteur demi-pas (pour connexions entre circuits imprimés) - XH2

  OMRON

  A 1.27-mm pitch connector for high-density mounting and compacted electronic devices
  
  [Features]
  · Available in the same shape as the G5D in both AC/DC or DC-only types.
  · Open-state leakage current between outputs is 10 μA or less.
  · The voltage resistance between input/output is 2500 VAC.
  · Input resistance and non-input resistance types available.
  · Overvoltage absorption circuit built in.
  ▪ Can switch between AC full-wave rectification and half-wave rectification.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	4.67 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur de câble plat (type PCB), XG2

  OMRON

  [Features]
  · Total cost reduction is achieved by high-density mounting and low-power wire connections.
  · The pressure-welded system lets you connect all terminals in bulk without any terminal processing work.
  · Can be dip-soldered directly to a PCB.
  · The small size (height 5.8 mm, width 6.8 mm) greatly improves PCB mounting efficiency.
  · Uses a 2.54 mm grid terminal array.
  · PCB pattern design is easy.
  · Two types of terminal arrays: standard and inverse.
  · Uses insulating materials complying with UL standards (UL94V-0).
  · Pressure-welding tool uses attachment that supports all poles.
  · Saves time and work connecting wires.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	2.40 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteur de câble plat (type à usage général) - XG4

  OMRON

  The core of this printed circuit board connector is compliant with MIL standards.
  
  [Features]
  · The adoption of a new high-productivity design has delivered both high reliability and low costs.
  · A box type plug (XG4C type) that helps save space during installation is also available.
  · A press-fit type plug (XG4E type) that can be used as a relay is also available.
  · A wide range of installation options are available by combining discrete wire press-fitted/crimped connectors (XG5 type), original plugs (XG8 type), and PCB types (XG2 type).
  · The use of the simple and unique locking levers developed by the manufacturer makes it possible to lock original plugs (XG8 type) and box type plugs (XG4C type).
  · Complies with MIL standards (MIL-C-83503).
  · UL standard (File No.E103202) certified products are used as standard (except for the XG4U and XG4H models).

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	1.52 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

Loading...