Connecteurs entre circuits imprimés（Norme représentative：UL）

?* À propos du délai d'expédition et des prix

• • Recommandation

  

  Connecteur DIN (pour courants électriques moyens et élevés) - XC4

  OMRON

  [Features]
  ・ This is a DIN connector for medium and high electrical currents, for which standards have been set internationally.
  ・ It conforms to and is compatible with DIN41612.
  ・ As there is sufficient insulation distance, it can be used with medium and high electrical currents, and high voltage circuits.
  ・ It can be mounted within the same rack as the XC5 series.
  ・ There is a wide selection of the M type of DIN connectors (mixed type) available.
  ▪ UL standard (File No.E103202) certified products are used as standard (except for some products).

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	14.18 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur circuit imprimé à câble avec verrou, pas de 7.92mm, avec prise en charge des intensités élevées - série DF22【1-100 pièces par conditionnement】

  HIROSE ELECTRONIC

  [Features]
  · Cable connector for board-to-cable and cable-to-cable connections. Supports 30 maximum amperes.
  · Equipped with a lock mechanism and mechanism for preventing incorrect insertion to ensure safety.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.09 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  FFC-FPC (trou traversant ) (5597) à surface de contact supérieure

  MOLEX

  [Features]
  There are a variety of Molex connectors available for both FFC (flat flexible cables) and FPC (flexible printed circuit boards). (1.25 mm pitch, ZIF upper surface contact type)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.50 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Série BLZF 3.5

  WEIDMUELLER

  [Features]
  ・3.50-mm pitch spring connection.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	1.86 €
  Délai d'expédition minimum ：	92 jours

  *Prix unitaire/configuration de base

• 

  Série B2L 3.5

  WEIDMUELLER

  3.5-mm pitch 2-stage spring connection. This is a top selling product.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	7.92 €
  Délai d'expédition minimum ：	51 jours

  *Prix unitaire/configuration de base

• 

  Série SL 3.5

  WEIDMUELLER

  3.5mm pitch board side connector. Classic product.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.86 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  FFC-FPC (trou traversant) (52045) droit

  MOLEX

  [Features]
  There are a variety of Molex connectors available for both FFC (flat flexible cables) and FPC (flexible printed circuit boards). (1.0 mm pitch, NONZIF, straight type)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.92 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  FFC-FPC (trou traversant) (52806) droit

  MOLEX

  [Features]
  • FFC (multi-conductor cable) and various connectors for FPC (flexible printed circuit boards) (1.0-mm pitch NONZIF straight type (2)).

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.58 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  FFC-FPC (trou traversant) (52807) coudé

  MOLEX

  [Features]
  There are a variety of Molex connectors available for both FFC (flat flexible cables) and FPC (flexible printed circuit boards). (1.0 mm pitch, NONZIF, angled type)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.77 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  FFC-FPC (trou traversant) (5597) droit

  MOLEX

  [Features]
  There are a variety of Molex connectors available for both FFC (flat flexible cables) and FPC (flexible printed circuit boards). (1.25mm pitch, ZIF, straight type)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.98 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur DIN (type double contact) - XC5 (norme DIN)

  OMRON

  [Features]
  ・ The number of international standard DIN connectors has been expanded substantially.
  ・ The aim is to expand the number of contacts while leveraging the best points of DIN connectors.
  ・These variations can be used with a number of industrial applications.
  ・ This fits global needs by moving from one-piece connectors (card edged) to two-piece connectors.
  ・ A low price has been realized while also being able to maintain high reliability through the use of a twin contact type.
  ・ Low insertion force has been realized thanks to FEM analysis.
  ・ Can fit with the manufacturer's XC series.
  ▪ UL standard (File No.E103202) and CSA standard (File No. LR62678) certified products are used as standard.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	3.08 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Prise IC - XR2

  OMRON

  [Features]
  ・ Highly reliable such as being able to cope with sudden power outages etc.
  ・Ideal for high speed data processing circuits.
  · The contacts are round 4-point pin contacts which have good retention and superior vibration and shock resistance.
  ・ The opening for inserting the contact is large, so insertion is easy.
  ・ The position of the contact with the IC (integrated circuit) lead is high, ensuring an excellent contact.
  · Has excellent resistance to rises in flux.
  ・ A rich product lineup, including open frame, closed frame, single-row type, DIP terminal, wrapping (wrap) terminal, and low-profile DIP terminal types.
  ・ Gold flash-plated products are also now available as a series, allowing you to choose the perfect product for the application..
  ▪ UL standard (File No.E103202).
  ・ Certified products are used as standard.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	1.34 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Fiche d'origine - XG8

  OMRON

  [Features]
  ・ This is a general purpose original plug that conforms to a broad range of applications.
  ・ It can be widely used as a plug for a variety of socket fitting.
  ・ Examples of conforming socket connectors (manufacturer: …, Connector for XG4M flat cable/XG5 loose wire insulation displacement connector.
  · Compatible with through hole diameter ⌀0.8.
  ・ For the 2-column type of L-shape terminal plug, through the utilization of a block type of base, workability is improved during soldering, a lock lever that has been simplified further is used and simple locking is possible (except for XG8V, XG8W Straight).
  ・ Separation cut is possible (except XG8WL type).
  ▪ UL standard (File No.E103202).
  ・ Certified products are used as standard (only XG8A and XG8B).

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	1.24 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteur demi-pas (pour connexions entre circuits imprimés) - XH3

  OMRON

  [Features]
  ・ A space saving type that saves space in the screw mounting section.
  ・ Handles stacking heights of 12 mm to 20 mm.
  ・ A half pitch connector that handles heights between circuit boards of 12 mm to 20 mm at a pitch of 1 mm with stacking connections.
  ・ High-density mounting is possible thanks to the 2-row configuration with a contact pitch of 1.27 mm.
  ・ Connections with the circuit board use four row staggered configurations (1.27 mm × 1.905 mm), and stop pins are used as standard for all contains to help prevent floating and falling during soldering.
  ・ Uses a leaf connection structure that is able to hold up to prying and that enables smooth insertion and extraction.
  ・ Has a mating length of 3.1 mm, helping improve space during mounting.
  ・ The design of the press fit section helps maintain a stable contact force.
  ・ What's more, by utilizing gold and palladium-plated contact points, the reliability of the contacts has been improved even further.
  ▪ UL standard certified product (File No.E103202).
  ・Cannot be mated with XH2/XH4 half pitch connectors.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	4.08 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteur de câble plat (type PCB), XG2

  OMRON

  [Features]
  · Total cost reduction is achieved by high-density mounting and low-power wire connections.
  · The pressure-welded system lets you connect all terminals in bulk without any terminal processing work.
  · Can be dip-soldered directly to a PCB.
  · The small size (height 5.8 mm, width 6.8 mm) greatly improves PCB mounting efficiency.
  · Uses a 2.54 mm grid terminal array.
  · PCB pattern design is easy.
  · Two types of terminal arrays: standard and inverse.
  · Uses insulating materials complying with UL standards (UL94V-0).
  · Pressure-welding tool uses attachment that supports all poles.
  · Saves time and work connecting wires.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	2.40 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteurs de court-circuit - XJ8 / XG8S / XG8T

  OMRON

  [Features]
  · A low-profile, economical connector that is used for circuit switching.
  · Provides an above circuit board height of 5.8 mm (XJ8 type) or 6.8 mm (XG8S/T), and a low profile.
  · These connectors can also be used both vertically and horizontally in 2.54-mm grid high-density mountings.
  · Available in a lineup of one to three rows.
  · Compatible with through hole diameters of ⌀0.8.
  · An easy-to-insert, difficult-to-remove structure.
  · A 2-point contact structure with high contact reliability.
  · The thin plug housing (XJ8 type) is made using PPS resin, which has excellent heat-resistant characteristics.
  · UL Standard (File NO E103202).
  · Certified products are used as standard (XJ8 type).

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.26 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur / Connecteur pour alimentation interne / Série DF60 (support 45 A / pas de 10,16 mm)

  HIROSE ELECTRONIC

  Maximum 45A. 10.16-mm pitch. This high power connector for large currents is the smallest size in its class.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	3.00 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur / Connexion pour alimentation interne, série DF63 (support 15 A, pas de 3,96 mm)【100 pièces par conditionnement】

  HIROSE ELECTRONIC

  Maximum 15A. 3.96mm pitch. This connector employs a center lock function which enables high-density mounting, contributing to space saving on the board.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	12.95 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur EnerBee circuit imprimé à câble avec verrou, série EM35M

  HIROSE ELECTRONIC

  Maximum 50A. This relay type connector has the largest current capacity in the EnerBee range, and is widely used for wiring in large-scale equipment.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	11.05 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

Loading...