Clés à six pans（Tip Type：Bille Page 3）

?* À propos du délai d'expédition et des prix

• 

  Clé à tête sphérique, en L, longue, tige courte BLB-S

  MAEDAKINNZOKU

  Hexagonal bar wrench ideal for tightening/loosening inch-sized hexagonal socket bolts, etc., in spaces where there are height restrictions.
  [Features]
  · Uses a special alloy to enhance torque, durability, and abrasion resistance.
  · High-level heat treatment/hard chrome plating treatment.
  · The ball point finish enables quick turning and temporary tightening from a diagonal position.
  · L-shaped long type with a short underhead length.
  [Applications]
  · Ideal for maintenance and assembly of devices using imperial-size bolts, such as vehicles from outside Japan, motorcycles, and other imported machinery.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	7.56 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Jeu de clés longues, à tête sphérique, courtes sous col, type L, BL700S

  MAEDAKINNZOKU

  A short type hex wrench where the length of the neck has been made as short as possible.
  [Features]
  · Uses a special alloy to enhance torque, durability, and abrasion resistance.
  · High-level heat treatment/hard chrome plating treatment.
  · The ball point finish enables quick turning and temporary tightening from a diagonal position.
  · 7-piece set. L-shaped long type with a short underhead length.
  [Applications]
  · Ideal for assembly and maintenance work of industrial machinery and electronic equipment.
  · Ideal for assembly and maintenance work of automobiles, motorcycles and bicycles.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	69.39 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Jeu de clés longues, à tête sphérique, courtes sous col, type L, BLB900S

  MAEDAKINNZOKU

  Hexagonal bar wrench set ideal for tightening/loosening inch-sized hexagonal socket bolts, etc., in spaces where there are height restrictions.
  [Features]
  · Minimized neck length L-shaped long type.
  · 9-piece set.
  · The ball point finish enables quick turning and temporary tightening from a diagonal position.
  · Uses a special alloy to enhance torque, durability, and abrasion resistance.
  · High-level heat treatment/hard chrome plating treatment.
  [Applications]
  · Ideal for maintenance and assembly of devices using imperial-size bolts, such as vehicles from outside Japan, motorcycles, and other imported machinery.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	117.44 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Clé Allen (Tapered Head®, extracourte)

  EIGHT TOOL

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	18.86 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Jeu de clés Allen (très longues), 8 pièces

  EIGHT TOOL

  The ballpoint is machined into a spherical shape so that it can be used by tilting approximately 25°, allowing bolts to be temporarily tightened more quickly and improving workability. Holders are designed for easy removal and storage of hex key, preventing loss, and for convenient carrying and keeping.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	89.84 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé Allen (Tapered Head®, extralongue, jeu de 9 pièces, avec tube)

  EIGHT TOOL

  Pipe adapter developed exclusively for 2-stage holders can store 2 pipes comfortably without becoming unwieldy. Pipes are included, so it is ideal for retightening. Durability and wear resistance are further improved so that the Taper Head can be used for final tightening. The torsional strength is 10% to 20% higher than the conventional ball point, and especially effective when used at an inclination (0 to 20°).

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	123.61 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé Allen (Tapered Head®, extralongue)

  EIGHT TOOL

  Sizes are colored to be easily distinguishable and baked coating is luxurious and unlikely to peel off. 2.5-10 mm also come with a silk print size indication. Durability and wear resistance are further improved so that the Taper Head® can be used for final tightening. The torsional strength is 10% to 20% higher than the conventional ball point, and especially effective when used at an inclination (0 to 20°).

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	32.06 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Jeu de clés Allen (Tapered Head®, extralongues)

  EIGHT TOOL

  Sizes are colored to be easily distinguishable and baked coating is luxurious and unlikely to peel off. 2.5-10 mm also come with a silk print size indication. Durability and wear resistance are further improved so that the Taper Head® can be used for final tightening. The torsional strength is 10% to 20% higher than the conventional ball point, and especially effective when used at an inclination (0 to 20°).

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	126.78 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Clé Allen (Tapered Head®, superlongue) (extrémité usinée)

  EIGHT TOOL

  Easy to identify size with coloring of boots. Even if the wrench is broken, the boot prevents the scattering of fragments.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	17.24 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Clé hexagonale à tête sphérique

  TRUSCO NAKAYAMA

  Each surface of the edge of the Allen wrench tip is evenly chamfered. Compared to the standard product, it features outstanding high torque, durability, and abrasion resistance. Insertion into hex sockets has become easier than ever, and in addition, the chamfered angle is designed to fit the corners of the bottom of the hex socket for closer contact. Matte chrome plating.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	8.19 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Clé hexagonale, à tête sphérique, acier inoxydable (standard)

  TRUSCO NAKAYAMA

  A ballpoint L type wrench made of stainless steel and featuring outstanding corrosion resistance, chemical resistance, and shock resistance. A ballpoint type that can be used at an approximately 25° slant.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	6.15 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Clé hexagonale, à tête sphérique, acier inoxydable (standard)【9 pièces par conditionnement】

  TRUSCO NAKAYAMA

  A ballpoint L type wrench made of stainless steel and featuring outstanding corrosion resistance, chemical resistance, and shock resistance. A ballpoint type that can be used at an approximately 25° slant. Holder can be rotated to enable each differently sized wrench to be taken out and put back easily.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	79.85 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé hexagonale, à tête sphérique, acier inoxydable (longue)【9 pièces par conditionnement】

  TRUSCO NAKAYAMA

  A long ballpoint L type wrench made of stainless steel and featuring outstanding corrosion resistance, chemical resistance, and shock resistance. A ballpoint type that can be used at an approximately 25° slant. Holder can be rotated to enable each differently sized wrench to be taken out and put back easily.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	101.53 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Clé hexagonale à tête sphérique (taille en pouces)

  TRUSCO NAKAYAMA

  Machined with a ball point, it can be used tilted by approximately 25°, speeding up temporary tightening of bolts, and increasing workability. Black oxide treated. Made from chrome vanadium steel.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	1.63 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Clé hexagonale, poignée en T, à tête sphérique

  TRUSCO NAKAYAMA

  T handle type 2-point fastening type. The ball point part can be tilted to one corner at angle of 25° and the tool shows its strength when working in confined areas which are normally out of reach. Hardness is HRC 55 to 60. Made from chrome vanadium steel.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	101.53 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Jeu de clés hexagonales en L, tête sphérique

  TRUSCO NAKAYAMA

  [Features]
  · It is a hexagonal bar wrench rotated by 30° with consideration for ease of use.
  · The special processing technology provides high durability and abrasion resistance.
  · Final tightening can also be performed with the ball point part.
  

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	88.64 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé hexagonale en L, tête sphérique

  TRUSCO NAKAYAMA

  [Features]
  · It is a hexagonal bar wrench rotated by 30° with consideration for ease of use.
  · The special processing technology provides high durability and abrasion resistance.
  · Final tightening can also be performed with the ball point part.
  

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	7.02 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Jeu de clés hexagonales, à tête sphérique

  ASAHI METAL INDUSTRY

  [Features]
  · Since the tip planar angle of the hexagonal bar is chamfered evenly on each side, it is easy to insert it into hexagon sockets.
  · Screws can be rotated from angles up to a maximum of 25° with the ballpoint tip, making work easy and quick even in narrow places.
  · Hardness: HRC 54-59
  [Applications]
  · Tightening and loosening work for hex socket bolts and hex socket set screws.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	50.86 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Jeu de clés hexagonales, tête demi-sphérique (demi-longues)

  TRUSCO NAKAYAMA

  [Features]
  · The tip of the short side has undergone half ball point processing. The approach to the hex sockets is easier than the conventional product as a half ball is used.
  · Half ball finish allows achievement of easy insertion and the same level of torque transferability.
  · The screw can be turned from a maximum slope degree of 32°.
  · It utilizes high-quality special alloy chrome vanadium steel (SNCM20V).
  · In order to ensure homogeneous and highly accurate tempering (heat treatment) hardness (HRC 60° ±1°), a continuous furnace was intentionally not used, while a sealed-quench furnace / non-oxidizing, decarburizing correction quenching method has been adopted.
  · The surface processing of special chrome plating exerts excellent wear resistance and prevents rust over a long period of time.
  · Final tightening can be performed with a ballpoint wrench by using the pipe handle.
  · Partial painting is done so that the size can be distinguished at a glance based on color.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	98.62 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Jeu de clés longues, hexagonales, à tête sphérique

  ASAHI METAL INDUSTRY

  [Features]
  · Since the tip planar angle of the hexagonal bar is chamfered evenly on each side, it is easy to insert it into hexagon sockets.
  · Screws can be rotated from angles up to a maximum of 25° with the ballpoint tip, making work easy and quick even in narrow places.
  · Hardness: HRC 54-59
  [Applications]
  · Tightening and loosening work for hex socket bolts and hex socket set screws.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	60.72 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé hexagonale moletée

  PB SWISS TOOLS

  Knurling prevents slippage, allowing the user to work safely even with oiled or wet hands
  

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	14.55 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

Loading...