Clés dynamométriques（Head Replaceable：N/A）

?* À propos du délai d'expédition et des prix

• • Recommandation

  

  Clé dynamométrique préréglée

  TOHNICHI MFG

  [Caractéristiques]
  Lorsque le couple défini est atteint, la bascule s'active et un signal sonore informe l’utilisateur de l'achèvement du serrage.
  · La tête de la cé à cliquet a 24 dents et une amplitude de 15° pour un serrage exceptionnel dans les espaces étroits.
  · Le couple peut être facilement modifié par graduation.
  [Applications]
  · Pour les sites de travaux difficiles tels que les champs et ceux impliquant une exposition aux huiles et aux produits chimiques.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	119.82 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique à cadran (avec aiguille)

  TOHNICHI MFG

  [Features]
  · Worker fatigue decreases due to having fewer irregular shapes compared to plates.
  · Dial scale can be rotated, so the indicator can be set to the configured torque and completed with "0".
  · Analog version is convenient for reading the maximum value.
  [Applications]
  · For inspection and tightening.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	176.18 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique Kanon de marquage (estampage), type N-MQLK

  NAKAMURA MFG

  [Features]
  · Never miss a place where bolts have not been tightened. The bolt head is marked "Pon". Commercially available socket-compatible type.
  · Since marking is done automatically, there is no need to perform marking work after tightening. Truly the last word in error-proofing.
  · Marking is performed after the completion of tightening, serving as "the evidence of proper tightening."
  · The torque wrench's socket supports one commercially available deep socket. (Note: Mounting hole machining is required.)
  · The ink used is an oil-based ink made by Shachihata, so the marks are non-erasable.
  · For each ink charge, sockets of 8 to 13 mm in size can be filled approximately 1,500 times. The 14-24 mm products allow marking approximately 6,000 times.
  · Red ink is included as an accessory.
  · Its simple structure makes maintenance easy
  · The accuracy is guaranteed up to ±3%.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	439.41 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Couplemètre numérique pratique

  MAEDAKINNZOKU

  Digital torque measuring device.
  [Features]
  · Can be mounted between manual handles and sockets for use.
  · When the set torque is reached, it will be announced by a buzzer sound, red LED light and LCD.
  · Comes with a calibration certificate.
  · Can be switched between two measurement modes (peak mode / track mode). Supports both clockwise and counterclockwise rotation.
  · Equipped with a function to prevent overtorque by notifying the user with a sound of the buzzer (intermittent) when target torque is almost achieved.
  · The buzzer can be set to start in a range between 50 and 95% of target torque.
  [Applications]
  · Various manufacturing industries such as industrial machinery, analytical instruments, automobiles. etc., and inspection.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	115.16 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique / Préréglée avec cliquet

  TOHNICHI MFG

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	631.30 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique à prédéfinition (paramétrage direct)

  MAEDAKINNZOKU

  Dedicated torque wrench for tightening bolts and nuts.
  [Features]
  · Digital-type torque setting for easy identification of displayed value.
  · In tightening work, when it reaches the set torque value, there will be a "clicking" sound or a sensation to the hand.
  · Unlike conventional types, there is no need to read the main scale and Vernier scale, so it is convenient for preventing setting errors and confirmation/management of tightening torque.
  · Torque is set based on digitally displayed value of mechanical mechanisms which can be read directly.
  [Applications]
  · For assembly, maintenance, and inspection of places requiring torque setting, such as for ports, electrical facilities, automobiles, heavy machinery, aircraft, etc.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	173.54 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Cliquet digital (numérique)

  MAEDAKINNZOKU

  Easy-to-use ratchet type digital torque wrench.
  [Features]
  · Digital torque display allows anyone to manage torque with ease without relying on their intuition.
  · When the set torque is reached, it will be announced by an LED light, buzzer sound and LCD.
  · Comes with a calibration certificate.
  · The measured torque value can be transferred to a PC.
  · Data storage: Up to 250 entries.
  [Applications]
  · Various manufacturing industries such as industrial machinery, analytical instruments, automobiles. etc., and inspection.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	406.43 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique / Préréglée / Certificat de traçabilité/étalonnage (peut être délivré)

  NIPPEI KIKI

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	152.36 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique à prédéfinition (paramétrage direct / constant)

  MAEDAKINNZOKU

  Tip socket is a holding type that prevents bits from falling out, as a torque wrench that dramatically decreases mistakes.
  [Features]
  · Equipped with a hold mechanism that prevents the socket from falling off and provides excellent operability.
  · In tightening work, when it reaches the set torque value, there will be a "clicking" sound or light "shock" to the hand.
  · Unlike conventional types, there is no need to read the main scale and Vernier scale, so it is convenient for preventing setting errors and confirmation/management of tightening torque.
  · Torque is set based on digitally displayed value of mechanical mechanisms which can be read directly.
  [Applications]
  · For assembly, maintenance and inspection at locations in high places where torque control is required.
  · Can be used for work ranging from assembly at industrial plants to maintenance of large trucks, automobiles, general industrial equipment and plants.
  · Ideal for various torque management tightening work.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	235.00 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique à prédéfinition (définition en mémoire)

  MAEDAKINNZOKU

  Dedicated torque wrench for tightening bolts and nuts.
  [Features]
  · A digital type with easy-to-see numerical display that drastically reduces errors in torque setting.
  · In tightening work, when it reaches the set torque value, there will be a "clicking" sound or light "shock" to the hand.
  · Unlike conventional types, there is no need to read the main scale and Vernier scale, so it is convenient for preventing setting errors and confirmation/management of tightening torque.
  · Torque is set based on digitally displayed value of mechanical mechanisms which can be read directly.
  · Torque can be set by inserting a hex L-shape wrench into a configuration thread component in the rear of the wrench.
  [Applications]
  · Ideal for assembly, maintenance, and inspection of places requiring torque setting, such as for ports, electrical facilities, automobiles, heavy machinery, aircraft, etc.
  · Can be used for work ranging from assembly at industrial plants to maintenance of large trucks, automobiles, general industrial equipment and plants.
  · Ideal for various torque management tightening work.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	192.97 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique à molette (paramétrage direct)

  MAEDAKINNZOKU

  Specialized monkey-type clamping torque wrench which does not damage the corners of bolts or nuts.
  [Features]
  · The lower jaw of the monkey wrench head part is better secured, and has a backlash-less worm function.
  · Digital-type torque setting for easy identification of displayed value.
  · In tightening work, when it reaches the set torque value, there will be a "clicking" sound or sensation to the hand.
  · Can be adjusted to any required sizes, metric or inch, or to square or irregular shapes of nuts and bolts.
  [Applications]
  · For piping of air conditioners, etc. and torque tightening for automobiles and motorcycles.
  · For optical fiber connector/exchanger mounting in communication facilities, as well as for anchor bolts on evacuation equipment in disaster prevention facilities, etc.
  · Wide type ideal for tightening non-ferrous/plastic nuts, etc. at low torque.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	295.56 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Super clé dynamométrique

  SUPER TOOL

  [Features]
  · The flare nut for use with new refrigerants is tightened at a suitable torque value. The tightening torque setting supports new refrigerants.
  · Tightening is complete at the point when a "click" sound is made at the set torque

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	97.39 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique paramétrable

  SROAD

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	63.06 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique paramétrable Kanon

  NAKAMURA MFG

  [Features]
  · The required torque can be easily set at hand.
  · By exchanging the socket, several types of bolts and nuts can be tightened.
  [Applications]
  · For work requiring various tightening torques to be supported.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	184.21 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  [Kanon] Clé dynamométrique, avec cadran

  NAKAMURA MFG

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	203.03 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique en forme de clé à fourche simple

  MAEDAKINNZOKU

  Dedicated torque wrench for tightening flare nuts.
  [Features]
  · Standard tightening torque is set in advance for the new refrigerant's flare pipe coupling and flare nut.
  * The torque value setting cannot be changed.
  · When it reaches the set torque value, there will be a "clicking" sound or light "shock" to the hand.
  [Applications]
  · For tightening flare tube fittings and flare nuts on room air-conditioners, cooling machines, etc.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	85.95 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique

  SIGNET

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	114.10 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique Kanon isolée, monofonction, type N-QSPK-CE

  NAKAMURA MFG

  [Features]
  · A special dual-layer design for the insulating material prevents accidents with electric shock.
  · A special dual-layer coating of insulating material protects the operator from electric shock.
  · Since the upper and lower layers of the dual-layer coating of insulating material have been color-coded, it is easy to see at a glance the extent of damage to the coating.
  · The withstand voltage is within 1,000 VAC.
  · Ideal for servicing, maintenance, and inspection of electric cars.
  · The insulated coating socket is also a custom order product.
  · The accuracy is guaranteed up to ±3%.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	227.96 €
  Délai d'expédition minimum ：	45 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique Kanon à verrouillage, paramétrable, type N-KQLK

  NAKAMURA MFG

  [Features]
  · The torque adjusting ring is secured using a dedicated tool. Torque value cannot be changed while working.
  · The torque value cannot be changed without a dedicated tool.
  · There are no torque value fluctuations during tightening work.
  · A ratchet type that enhances work efficiency and is suitable for repetitive work.
  · The accuracy is guaranteed up to ±3%.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	196.34 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique Kanon monofonction, type N-SPK

  NAKAMURA MFG

  [Features]
  · Click. Safety work with a beep indicating the completion of tightening. Wrench type suitable for assembly-line work.
  · A single-function torque wrench for which the width across flats and torque values are determined for use at a constant torque value.
  · Suitable for fastening many identical bolts (nuts) with the same torque value in assembly-line work.
  · Can be used effectively in narrow spaces, such as the gaps in machinery.
  · While it activates only when fastened in arrow direction, it can be used for left screws by flipping over.
  · The accuracy is guaranteed up to ±3%.
  · H types with grips are also available.

  Sélectionner et comparer

  › Configurer maintenant
  Délai d'expédition minimum ：	8 jours

• 

  Clé dynamométrique Kanon monofonction, à tête polygonale, type N-RSPCK

  NAKAMURA MFG

  [Features]
  · A-OK even in narrow places where a wrench cannot be inserted. Ring type with no mistakes in torque.
  · Ideal for fastening in narrow places where a wrench cannot be inserted.
  · A single-function torque wrench for which the width across flats and torque values are determined for use at a constant torque value.
  · Suitable for fastening many identical bolts (nuts) with the same torque value in assembly-line work.
  · The accuracy is guaranteed up to ±3%.
  · H types with grips are also available.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	92.24 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Clé ouverte à crochet N-QLK

  NAKAMURA MFG

  [Features]
  · Preset type ideal for fastening nuts and round rods with a key groove.
  · Preset type torque wrench N-QLK with open wrench and hook wrench attached.
  · Ideal for fastening nuts and round rods with a key groove.
  · Also useful for setting the tooling to be used for machine tools and attaching blades.
  · Used for piping work and maintenance in thermal and nuclear power stations throughout Japan.
  · The accuracy is guaranteed up to ±3%.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	286.69 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique à cliquet Kanon monofonction, type N-QSPK

  NAKAMURA MFG

  [Features]
  · Set the torque value constant. The ratchet mechanism with square drive enhances work efficiency.
  · A ratchet type that can be quickly tightened at a constant torque, making it suitable for repetitive work.
  · The operation when releasing the torque value is the same as for the N-SPK type.
  The accuracy is guaranteed up to ±3%.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	92.24 €
  Délai d'expédition minimum ：	13 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique Kanon à platine, type N-FK

  NAKAMURA MFG

  [Features]
  · Ideal for general tightening and inspection. A popular type fan-shaped plate scale.
  · A simple construction that lasts long due to little abrasion.
  · Robust and easy to handle.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	107.38 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique Kanon à platine, type N-FK avec indicateur

  NAKAMURA MFG

  [Features]
  · Ideal for general tightening and inspection. A popular type fan-shaped plate scale.
  · A simple construction that lasts long due to little abrasion.
  · Robust and easy to handle.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	147.06 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

Loading...