HIROSE ELECTRONIC Connecteurs carrés（Representative Standard：UL）
| Nombre de jours d'expédition |
|
|---|
?* À propos du délai d'expédition et des prix
-
Connecteur circuit imprimé à câble pour source d'alimentation interne avec pas de 3.5mm - série MDF6【1-100 pièces par conditionnement】
HIROSE ELECTRONIC
Connector for board-to-cable connection with 3.5mm pitch. Although compact in size, this connector supports 7 maximum amperes, and its inner-lock construction provides a highly reliable connection, ideal for internal power supplies.
[Features]
· Compact type with 3.5mm pitch: A small-size, space-saving power supply connector, with pitch between adjacent contacts set at 3.5 mm, and arranged in a double-row pattern with 5 mm between opposing sides.
· 7A current rating ensured: Despite the compact size of the power supply, 7A current rating is ensured with use of AWG #16 wires (UL/CSA rating is 6A). Box-style header: Twist-resistant due to its box-style construction, enabling complete prevention of insertion errors.
· Equipped with inner-type full lock: An inner-type full lock with a locking section that is not exposed to the outside ensures secure engagement for a high level of safety.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Remise sur volume
à partir de∗ ： 0.19 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Connecteur avec verrou pour source d'alimentation interne, prise en charge d'enrobage avec pas de 5mm - série DF5【1-100 pièces par conditionnement】
HIROSE ELECTRONIC
Connector with lock for board-to-cable connection, with 5-mm pitch. Supports 8 maximum amperes. · Supports potting, and is ideal for connecting internal power supplies in equipment.
[Features]
· Potting is supported: Enables potting up to 9 mm, and is low-profile with a mounting height of 22.5 mm.
· Prevents incorrect insertion: A complete prevention mechanism guards against reverse entry and insertion into opposite poles during the coupling of pin headers and sockets.
· Solder cracking protection: Glass-fiber reinforced resin is utilized for the pin header case, as a measure for protecting against solder cracking caused by thermal contraction.
· Prevents reverse entry into board: Added guide posts on pin headers prevent reverse board entry.
· Full lock mechanism: Equipped with an outer-lock type full-lock mechanism.
· 8 A current rating: Can carry a maximum current of 8 Amperes.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Remise sur volume
à partir de∗ ： 0.09 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Connecteur pour rack et panneau, série QR / P6
HIROSE ELECTRONIC
Rectangular multipolar racks with plug-ins connector/panel connector QR/miniaturization of P1/Implementation of high density. • Small design crimp terminals divided for power supplies and signals with guide pins and insulation in a single body shape.
[Features]
· The terminals have a smooth insertion and removal feel, stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
· The terminals are made compact by segregating according to those for power and those for signals.
• The signal terminal pitch inside the housing is 2.54 mm, and the 2 poles opposite each other on one side are distributed with 6.9-mm pitches for sufficient durability to withstand high voltage, so these units can be used for power supplies.
• In addition, the insulation is a flame retardant material (UL9V-0).
• The small design features guide pins and insulation joined in a single body shape.
• Mounting to the panel or the rack uses a stepped screw system to fix the product in place, allowing for comfortable insertion and removal operations.
• The female-type housing uses a mating surface deeper than the contact point for female terminals, for a structure with finger testing (compliant with UL standard 1950) capabilities.
• This product has obtained UL, CSA, and TUV certifications.- Remise sur volume
à partir de∗ ： 2.86 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Connecteur pour rack et panneau, série QR / P
HIROSE ELECTRONIC
Plug-in connection rack/panel connector. Connects and disconnects the power supply and signal circuit between the unit and the rack. Crimp terminals have a shared ribbon shape form for both male and female models.
[Features]
· The terminals have a smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
• Through the utilization of a shared form for male and female terminals, wire connections have improved workability and the terminals themselves have some flexibility.
• For each number of pins, the terminal position inside the housing puts some distance between the other terminals at the 2 opposite pins on both sides (4 pins total), and this distance ensure sufficient durability to withstand high voltage, so these products can be used for power supplies.
• In addition, the insulation is a flame retardant material (UL9V-0).
• Guide pins are made of metal for the durability to withstand coupling shocks.
• Products mount to the panel or rack fixed in place through a floating bushing system, allowing for comfortable insertion and removal operations.- Remise sur volume
à partir de∗ ： 3.66 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
- En promotion
Connecteur / Fil de raccordement discret, série DF1E (pas de 2,5 mm)【1-100 pièces par conditionnement】
HIROSE ELECTRONIC
A board-to-cable, cable-to-cable connector with a lock (2.5-mm pitch). The inner locking type mechanism prevents the connector from disconnecting due to impact.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.- Remise sur volume
à partir de∗ ： 0.27 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Connecteur / Connecteur à fil de raccordement discret, série DF1B (pas de 2,5 mm)【1-10,000 pièces par conditionnement】
HIROSE ELECTRONIC
Connector for board-to-cable and cable-to-cable connections with 2.5-mm pitch. A wide variety of offerings, including choices in PCB mounting orientation, terminal arrangements, and terminal plating.
[Features]
· A new approach to contact pressure welding and crimping: A new type of connector where the contact-pressure-welded terminal is inserted into the casing.
· By combined use of insulation displacement terminals and crimp terminals, wires with different current ratings can coexist within the same case.
· Terminals can be replaced after wires are connected, allowing ease of maintenance.
· Since the insulation displacement area is protected by the housing, a high level of reliability is ensured.
· Insulation displacement can be performed simply by replacing the applicator of a conventional crimp machine, so no expensive insulation displacement machine is required.
· Headers support potting: A header with increased height to support potting of the board for waterproofing (via resin filling) is available.
· A wide variety of offerings: Each of the "board-to-board" and "relay" series offers both single-row and double-row terminal arrangements, as well as tin and gold standard plating.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Remise sur volume
à partir de∗ ： 0.02 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Connecteur / Connecteur à fil discret pour le raccordement, série DF3 (pas de 2 mm)【1-100 pièces par conditionnement】
HIROSE ELECTRONIC
Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 1 terminal row. Can use for a wide range of equipment.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.- Remise sur volume
à partir de∗ ： 0.11 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Connecteur circuit imprimé à câble (pas de 2mm, double rangée, type à broche) - série DF11【1-500 pièces par conditionnement】
HIROSE ELECTRONIC
Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 2 terminal row. Can use for a wide range of equipment.
[Features]
· On-board improved space saving: The terminal pinout has been condensed into a 2-mm dual-row within a 5-mm width.
· Twice the number of signals can be acquired within the same space as a conventional 2-mm single-row connector.
· A wide array of variations: Crimped and pressure weld wiring connections are available in board-to-cable/relay/board-to-board connector types for expanding the scope of circuit board design.
· In addition, you can choose from gold/tin plating as well as versions which support SMT depending on the target application.
· Covers a broad range of compatible wiring: A 2 mm, dual-row compact design covers a range of compatible wiring from #22-30 AWG.
· Pressure welded labor-saving wire connection: By using fully automated pressure welding equipment, wire connections can be performed easily, including complex multi-harnesses (branched wiring connections), reducing the number of man-hours and eliminating manual processes.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Remise sur volume
à partir de∗ ： 0.16 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Coque de couvercle pour série HIF3B
HIROSE ELECTRONIC
This is a MIL standard-compliant ribbon cable connector HIF3B series crimped socket cover case.- Remise sur volume
à partir de∗ ： 5.15 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Connecteur pour rack et panneau série QR / P1
HIROSE ELECTRONIC
Compact, high-density mounted, rectangular multipole rack/panel plug-in connector QR/P. Compact crimp terminals divided into power supply and signal use.
[Features]
· The terminals have smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
· The terminals are made compact by segregating according to those for power and those for signals.
· The housing internal pinout has pin 12 opposing pin 2 on one side, pins 8, 24 opposing pin 2 on both sides (total: 4 pins), and pin 32 opposing pin 3 on one side (total: 6 pins) with a greater distance of separation from other pins. These terminal pins feature a creepage distance that can adequately withstand high voltages. Therefore, the terminals can be used as power supply terminals.
· Additionally, a flame retardant material (UL9V-0) is used for the insulating material.
· Guide pins are metallic to withstand coupling impact.
· Installation to a panel or rack is achieved via a floating bush. Therefore, insertion and removal do not require the application of excessive force.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Remise sur volume
à partir de∗ ： 3.75 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Connecteur pour rack et panneau, série QR / P4
HIROSE ELECTRONIC
Rectangular multipolar racks with plug-ins connector/panel connector QR/miniaturization of P1/Implementation of high density. • Small design with the insulation and the guide pin incorporated into a single body shape.
[Features]
· The terminals have a smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
· The terminals are made compact by segregating according to those for power and those for signals.
• The signal terminal pitch inside the housing is 2.54 mm, and the 2 poles on both sides (total: 4 poles) are distributed with 5.08-mm pitches for sufficient durability to withstand high voltage, so these units can be used for power supplies.
• In addition, the insulation is a flame retardant material (UL9V-0).
• The small design features guide pins and insulation joined in a single body shape.
• Mounting to the panel or the rack uses a stepped screw system to fix the product in place, allowing for comfortable insertion and removal operations.
• The female-type housing uses a mating surface deeper than the contact point for female terminals, for a structure with finger testing (compliant with UL standard 1950) capabilities.
• This product has obtained UL, CSA, and TUV certifications.- Remise sur volume
à partir de∗ ： 3.13 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Connecteur pour rack et panneau, série QR / P8
HIROSE ELECTRONIC
• Compared to the QR/P4 Series products with the same number of cores, dimensions are decreased by 20% through the use of a rectangular plug-in connection and multipolar rack and panel connector. • A terminal for power supplies with 2 poles on both sides is set up in a reinforced area of the guide pin of the housing.
[Features]
• Compared to conventional QR/P4 Series products with the same number of cores, these models have a small size width approximately 20% narrower.
• By positioning both sides of the 2-pole structure in the reinforced area of the guide pin of the housing, the design uses 5.3-mm pitches for a small size that is also durable enough to withstand high voltage, and can be used for power supplies.
• In addition, terminals for signals are positioned with a 2-mm pitch.
• The terminal for power supplies with 2 poles on both ends features holes that can be used for wire connections with AWG #20 - #24 wires.
• Other terminals for signals have holes that can be used for wire connections with AWG #24 - #28 wires.
· The terminals have stable contact pressure through point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
• The small design features guide pins and insulation joined in a single body shape.
• Mounting to the panel or the rack uses a stepped screw system to fix the product in a floating place, allowing for comfortable insertion and removal operations.
• This product has obtained UL, CSA, and TUV certifications.- Remise sur volume
à partir de∗ ： 1.70 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Connecteur câble à circuit imprimé série MDF51 pour circuit imprimé à résistance à haute tension (3000V), avec verrou inclus
HIROSE ELECTRONIC
This is a board-to-cable connector for a circuit board with high voltage resistance that corresponds to 3,000 V and has a lock included. One-push connection operation is available for improved mating operability.
[Features]
• Connector mating in just one push: Through the utilization of an inertia lock, mating work can be performed easily and with certainty in just one push.
• This also prevents accidents resulting from partial mating.
• Improved workability through vertical mating: Vertical mating and horizontal cable pulling improve workability in the field. drawer allows improved working in the field.
• Also, the mating surface has a large guiding area to make insert operations easier to perform.
• Designed with high voltage in mind: In addition to the terminal pitch, the design accumulates a large side surface distance, retaining performance in a high voltage environment.
• Header connector uplift prevention: Through solder connections to a total of 4 areas, the header side housing is fixed firmly in place, preventing and uplift from occurring.
• Solder implementation for uplift prevention: As a solder implementation method for preventing uplift, a kink structure is included in the terminals (P = 12 mm products only).
• UL, C-UL, and TUV certified products: Those products have obtained safety standard qualifications as connectors (P = 12 mm products only).- Remise sur volume
à partir de∗ ： 0.30 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
- En promotion
Connecteur mâle pour relais de soudure à haute pression, série HIF3BA-*PD
HIROSE ELECTRONIC
Can be used for cable-to-cable wiring inside machinery. The HIF3B series socket is also compatible with the HIF3A series.- Remise sur volume
à partir de∗ ： 13.03 € Prix spécial Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
| Marque |
|---|
| Série du produit |
| à partir de∗ |
| Délai d'expédition minimum ： |
| Connector Shape |
| A· B· C |
| D· E· F |
| G·H·I |
| J·K·L |
| M·N·O |
| P· Q· R |
| S· T· U |
| Number |
| Applicable pin/contact |
| Number Of Cores |
| Application |
| Allowable Current(A) |
| Allowable Voltage(V) |
| Wire connection method |
| Connection direction |
| Protection function (environmentally resistant) |
| Representative Standard |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Marque | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC |
| Série du produit | Connecteur mâle pour relais de soudure à haute pression, série HIF3BA-*PD | |||||||||||||
| à partir de∗ | 0.19 € *Prix unitaire/configuration de base Remise sur volume | 0.09 € *Prix unitaire/configuration de base Remise sur volume | 2.86 € *Prix unitaire/configuration de base Remise sur volume | 3.66 € *Prix unitaire/configuration de base Remise sur volume | 0.27 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 0.02 € *Prix unitaire/configuration de base Remise sur volume | 0.11 € *Prix unitaire/configuration de base Remise sur volume | 0.16 € *Prix unitaire/configuration de base Remise sur volume | 5.15 € *Prix unitaire/configuration de base Remise sur volume | 3.75 € *Prix unitaire/configuration de base Remise sur volume | 3.13 € *Prix unitaire/configuration de base Remise sur volume | 1.70 € *Prix unitaire/configuration de base Remise sur volume | 0.30 € *Prix unitaire/configuration de base Remise sur volume | 13.03 € Prix spécial *Prix unitaire/configuration de base En promotion |
| Délai d'expédition minimum ： | 5 jours | 5 jours | 5 jours | 5 jours | Jour même | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 6 jours | 5 jours |
| Connector Shape | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée |
| A· B· C | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| D· E· F | - | Autre | - | - | Autre | Autre | Autre | Autre | - | - | - | - | - | - |
| G·H·I | - | - | - | - | - | - | - | - | Autre | - | - | - | - | - |
| J·K·L | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| M·N·O | Autre | - | - | - | - | - | - | - | - | - | - | - | Autre | MIL |
| P· Q· R | - | - | Autre | Autre | - | - | - | - | - | Autre | Autre | Autre | - | - |
| S· T· U | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Applicable pin/contact | Mâle (fiche) / Femelle (prise) | Femelle (prise) | Femelle (prise) | Mâle (fiche) / Femelle (prise) | Mâle (fiche) / Femelle (prise) | Mâle (fiche) / Femelle (prise) | Mâle (fiche) / Femelle (prise) | Mâle (fiche) / Femelle (prise) | - | Mâle (fiche) / Femelle (prise) | Mâle (fiche) | Mâle (fiche) / Femelle (prise) | Mâle (fiche) | Mâle (fiche) |
| Number Of Cores | 4 ～ 10 | 2 ～ 10 | 24 | 8 ～ 24 | 2 ～ 15 | 2 ～ 40 | 2 ～ 15 | 4 ～ 40 | 20 ～ 60 | 12 ～ 32 | 16 | 8 ～ 12 | 2 | 34 ～ 50 |
| Application | Connexion de câble / Pour PCB | Connexion de câble | Montage sur panneau | Montage sur panneau | Connexion de câble / Pour PCB / Montage sur panneau | Connexion de câble / Pour PCB / Montage sur panneau | Connexion de câble / Pour PCB / Montage sur panneau | Connexion de câble / Pour PCB / Montage sur panneau | - | Montage sur panneau | Montage sur panneau | Montage sur panneau | Pour PCB | Connexion de câble |
| Allowable Current(A) | 5 ～ 7 | 7 ～ 8 | 10 | 10 | 1 ～ 3 | 0.5 ～ 3 | 3 | 0.5 ～ 2 | - | 10 | 3 | 3 | 1 | 1 |
| Allowable Voltage(V) | AC300 | CA / CC 500 | CA120 | CA 250 ～ CA 600 | CA250 | CA250 | CA250 | CA100 ～ CA250 | - | CA 125 ～ CA 250 | CA 250 ～ CA 300 | CA 30 ～ CA 300 | CA / CC 3000 | CA200 |
| Wire connection method | Serti / Autre | Serti | - | Serti | Serti / Autre | Serti / Soudage par pression / Autre | Serti / Autre | Serti / Soudage par pression / Autre | Serti | Serti | - | Serti | Autre | Soudage par pression |
| Connection direction | Droit / Angle | Droit | Droit | Droit | Droit / Angle | Droit / Angle | Droit / Angle | Droit / Angle | Droit | Droit | Droit | Droit | Droit | Droit |
| Protection function (environmentally resistant) | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Representative Standard | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL | UL |
Loading...
Filtrer par:
Stock
-
- Stock Items Included
Affiner la recherche en précisant les spéc./dim.
-
Connector Shape
- Forme carrée
- Autre
-
A· B· C
- Autre
-
D· E· F
- Dsub
- FCN
- Autre
-
G·H·I
- Usage intensif
- Autre
-
J·K·L
- Autre
-
M·N·O
- MR
- MIL
- Autre
-
P· Q· R
- Autre
-
S· T· U
- Autre
-
Number
- Autre
-
Applicable pin/contact
- Mâle (fiche)
- Femelle (prise)
- Utilisation combinée mâle / femelle
- Autre
-
Number Of Cores
-
Application
-
Allowable Current(A)
-
Allowable Voltage(V)
- 5
- DC 12
- 12VCC-230VCA
- 17.5
- 24
- CA 30
- 50
- AC50
- 72
- 100
- CA100
- CA120
- 125
- CA125
- CA 125
- 150
- AC150
- 160
- CA200
- 230/400
- 250
- CA250
- CA 250
- 300
- AC300
- CA 300
- 320
- 350CA
- CC 350
- 400
- AC400
- 400/400V (Leistungs-/Steuerungsbereich)
- 400/690
- 400/690V (Leiter-Erde/Leiter-Leiter)
- 400/690V (Leiter-Erde/Leiter/Leiter)
- 500
- CA500
- CA / CC 500
- 550
- 600
- CA 600
- 630
- 690
- 690/160V (Leistungs-/Steuerungsbereich)
- 830
- 830/400V (Leistungs-/Steuerungsbereich)
- 1000
- 1550
- CA / CC 3000
- 3100
-
Wire connection method
- Type soudé
- Serti
- Soudage par pression
- Fixation avec vis
- Autre
-
Connection direction
- Droit
- Angle
- Autre
-
Protection function (environmentally resistant)
-
Representative Standard
Affiner la recherche en spécifiant le fabricant
-
- MISUMI (4)
- ILME (19)
- HIROSE ELECTRONIC (14)
- WEIDMUELLER (3)
- HARTING (2)
- MOLEX (2)
- TE CONNECTIVITY (1)
- PROVERTHA (1)
- JAPAN AVIATION ELECTRONICS(JAE) (0)
- KEL (0)
- FINDER (0)
- FUJITSU COMPONENT (0)
- UNIVER (0)
- FISCHER ELEKTRONIK (0)
- IFM (0)
- LUMBERG (0)
- HELLERMANN TYTON (0)
- CONNFLY (0)
- BINDER (0)
- DECA (0)
- WAGO (0)
- SOURIAU (0)
- PHOENIX CONTACT (0)
- LAPP (0)
- EDAC (0)
- CONEC (0)
- HONDA TSUSHIN KOGYO (0)
- TRU COMPONENTS (0)
- ECON CONNECT (0)
- HIRSCHMANN (0)
- FUJIKURA (DDK) (0)
- OMRON (0)
- ASSMANN WSW (0)
- VOGT VERBINDUNGSTECHNIK (0)
- MH CONNECTORS (0)
- BKL ELECTRONIC (0)
Affiner la recherche en précisant le type de données CAO
-
- 2D
- 3D
Catégories relatives à « Connecteurs carrés »
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.