OSAKA SANITARY Raccords sanitaires / brides / joints statiques（Type de connexion 1 (côté gauche ou grand diamètre)：Raccord union virole ISO）

?* À propos du délai d'expédition et des prix

• 

  Virole à souder

  OSAKA SANITARY

  A sanitary rule that is compliant with ISO standards. Made in Japan.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	9.69 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Virole pour réservoirs

  OSAKA SANITARY

  Made in Japan, ISO Standard Compliant

  • Remise sur volume

  à partir de∗ ：	30.49 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Virole à diamètres différents, type à souder

  OSAKA SANITARY

  [Features]
  · Made in Japan Compliant with ISO stan.ards.

  • Remise sur volume

  à partir de∗ ：	12.26 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Virole excentrique à diamètre différent, type à souder

  OSAKA SANITARY

  Made in Japan; ISO standard compliant.

  • Remise sur volume

  à partir de∗ ：	48.16 €
  Délai d'expédition minimum ：	17 jours

  *Prix unitaire/configuration de base

• 

  Coude à virole x à souder

  OSAKA SANITARY

  Made in Japan—polished inside/outside (#320–400)
  
  [Features]
  · Extremely low fluid penetration, which dramatically reduces gasket odor.
  · Optimally suited when introducing hazard analysis and critical control points (HACCP).
  · Extracts from the material are extremely low, making it optimally suited to ultra-clean processes.
  · The rubber properties are retained even at high temperatures.
  · Can be sealed sufficiently even in steam plumbing lines (operating temperature: ≤ 145°C).
  · Superior sealing properties at high temperatures. Therefore, it is also suitable for aseptic lines and systems.
  · Can be used with most drug solutions where conventional rubber was difficult to use.
  · Can be used for the following chemical solutions without any problems.
  · E.g. sodium hydroxide, sodium hypochlorite, hydrogen peroxide solution, peracetic acid, and nitric acid, etc.

  • Remise sur volume

  à partir de∗ ：	40.93 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Adaptateur de flexible à virole

  OSAKA SANITARY

  Made in Japan, inside/outside 320-400 buff polishing

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	36.35 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Réducteur excentrique à virole

  OSAKA SANITARY

  Made in Japan inside/outside 320–400 buff polishing
  
  [Features]
  · Extremely low liquid penetration, dramatically reduces gasket aromatization.
  · Optimal at the time of introducing HACCP.
  · Only a small amount of material is extracted, making it appropriate for ultra-clean processes.
  · Retains the rubber properties even at high temperature.
  · Can be sealed sufficiently even in a vapor line (operating temperature: 145°C or less).
  · With excellent sealing properties at high temperatures, also suitable for aseptic line and aseptic system.
  · Can be used with most drug solutions where conventional rubber was difficult to use.
  · Can be used for the following types of drug solutions without any problems.
  · Sodium hydroxide, sodium hypochlorite, hydrogen peroxide solution, peracetic acid, nitric acid, etc.

  • Remise sur volume

  à partir de∗ ：	74.28 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Adaptateur de vis pour tuyau à virole

  OSAKA SANITARY

  Made in Japan Internal/External #320–#400 Polishing

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	41.96 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Douille filetée pour tuyau à virole

  OSAKA SANITARY

  [Features]
  · Made in Japan with internal & external 320 ~ 400# polishing

  • Remise sur volume

  à partir de∗ ：	44.62 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Coude à 45° d'extrémité à virole / à souder

  OSAKA SANITARY

  Made in Japan inside/outside 320–400 buff polishing

  • Remise sur volume

  à partir de∗ ：	34.78 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Capuchon de virole (avec filetage RC)

  OSAKA SANITARY

  Made in Japan—polished inside/outside (#320–400)
  
  [Features]
  · Extremely low liquid penetration, which dramatically reduces gasket odor.
  · Optimally suited when introducing hazard analysis and critical control points (HACCP).
  · Extracts from the material are extremely low, making it optimally suited to ultra-clean processes.
  · The rubber properties are retained even at high temperatures.
  · Can be sealed sufficiently even in steam plumbing lines (operating temperature: ≤ 145°C).
  · Superior sealing properties at high temperatures. Therefore, it is also suitable for aseptic lines and systems.
  · Can be used with most drug solutions where conventional rubber was difficult to use.
  · Can be used for the following chemical solutions without any problems.
  · E.g. sodium hydroxide, sodium hypochlorite, hydrogen peroxide solution, peracetic acid, and nitric acid, etc.

  • Remise sur volume

  à partir de∗ ：	17.12 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Adaptateur de bride à virole droit

  OSAKA SANITARY

  Made in Japan, inside/outside 320-400 buff polishing

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	110.95 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Cône d'adaptateur de bride de virole

  OSAKA SANITARY

  Made in Japan with inside/outside 320 - 400 buff polishing
  
  [Features]
  · Extremely small liquid penetration, dramatically reduces gasket aromatization.
  · Optimal for incorporating HACCP.
  · Only a small amount of material is extracted, making it appropriate for ultra clean processes.
  · Retains rubberized properties even at high temperature.
  · Can be sealed sufficiently even in a vapor line (operating temperature: 145°C or less).
  · Features excellent sealing properties at high temperatures and also suitable for aseptic lines and aseptic systems.
  · Can be used with most chemical liquids where conventional rubber is difficult to use.
  · Can be used for the following types of chemical liquids without any issues.
  · Ex. sodium hydroxide, sodium hypochlorite, hydrogen peroxide solution, peracetic acid, nitric acid, etc.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	93.30 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Réducteur à virole

  OSAKA SANITARY

  Made in Japan with inside/outside 320 - 400 buff polishing
  
  [Features]
  · Extremely small liquid penetration, dramatically reduces gasket aromatization.
  · Optimal for incorporating HACCP.
  · Only a small amount of material is extracted, making it appropriate for ultra clean processes.
  · Retains rubberized properties even at high temperature.
  · Can be sealed sufficiently even in a vapor line (operating temperature: 145°C or less).
  · Features excellent sealing properties at high temperatures and also suitable for aseptic lines and aseptic systems.
  · Can be used with most chemical liquids where conventional rubber is difficult to use.
  · Can be used for the following types of chemical liquids without any issues.
  · Ex. sodium hydroxide, sodium hypochlorite, hydrogen peroxide solution, peracetic acid, nitric acid, etc.

  • Remise sur volume

  à partir de∗ ：	66.70 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Raccord en T de diamètres différents à viroles

  OSAKA SANITARY

  Made in Japan inside/outside 320–400 buff polishing
  
  [Features]
  · Extremely low liquid penetration, dramatically reduces gasket aromatization.
  · Optimal at the time of introducing HACCP.
  · Only a small amount of material is extracted, making it appropriate for ultra-clean processes.
  · Retains the rubber properties even at high temperature.
  · Can be sealed sufficiently even in a vapor line (operating temperature: 145°C or less).
  · With excellent sealing properties at high temperatures, also suitable for aseptic line and aseptic system.
  · Can be used with most drug solutions where conventional rubber was difficult to use.
  · Can be used for the following types of drug solutions without any problems.
  · Sodium hydroxide, sodium hypochlorite, hydrogen peroxide solution, peracetic acid, nitric acid, etc.

  • Remise sur volume

  à partir de∗ ：	162.55 €
  Délai d'expédition minimum ：	12 jours

  *Prix unitaire/configuration de base

• 

  Adaptateur de flexible de diamètres différents à viroles

  OSAKA SANITARY

  Made in Japan inside/outside 320–400 buff polishing
  
  [Features]
  · Extremely low liquid penetration, dramatically reduces gasket aromatization.
  · Optimal at the time of introducing HACCP.
  · Only a small amount of material is extracted, making it appropriate for ultra-clean processes.
  · Retains the rubber properties even at high temperature.
  · Can be sealed sufficiently even in a vapor line (operating temperature: 145°C or less).
  · With excellent sealing properties at high temperatures, also suitable for aseptic line and aseptic system.
  · Can be used with most drug solutions where conventional rubber was difficult to use.
  · Can be used for the following types of drug solutions without any problems.
  · Sodium hydroxide, sodium hypochlorite, hydrogen peroxide solution, peracetic acid, nitric acid, etc.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	65.17 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Collier 3K

  OSAKA SANITARY

  Sanitary clamps designed for high pressure

  • Remise sur volume

  à partir de∗ ：	27.62 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Collier 2D

  OSAKA SANITARY

  [Features]
  · Supports both 8A to 15A and 1.0S to 1.5S

  • Remise sur volume

  à partir de∗ ：	20.51 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Collier 2K

  OSAKA SANITARY

  Sanitary clamp for the medium to low pressures

  • Remise sur volume

  à partir de∗ ：	18.85 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Capuchons à virole

  OSAKA SANITARY

  Convenient and hygienic ferrule caps.

  • Remise sur volume

  à partir de∗ ：	10.17 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

Loading...