Raccords de tuyaux mécaniques / raccords flexibles（Type：Pièce de raccordement (branchement et à vis)）

?* À propos du délai d'expédition et des prix

• 

  Flexible à poignée, type GT (branché)

  SHO-BOND COUPLING

  Branch provided on conventional G type to allow branching from fitting part.
  
  [Features]
  · Allows branching to be carried out at the same time as pipe connection.
  · Different diameter tees, etc. are not required.
  · Anybody can easily perform piping work.
  · The operation is simply to tighten the bolt.
  All stainless steel construction for corrosion resistance.
  · Parts made from SUS304 or SUS301.
  · The base is 2.
  · This is a G type with 0 MPa specifications.
  ·Boasting more than 30 years of sales, the G type continues to offer high-performance pressure resistance.
  · Ideal for temporary water supply piping.
  · Economical as repeated use is possible with a KUROMORI bolt.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	116.78 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Sortie supérieure, T-1, à vis

  RIKEN

  Designed for dissimilar metal joints, so it cannot be used for stainless steel pipes.
  
  [Features]
  · Wide selection of products for surface treatments.
  · Prevents bolt from dropping out during construction work, allowing safe and quick operation.
  · Due to recent environmental degradation affecting water supply, a high concentration of chlorine has been used for sterilization, significantly affecting pipes.
  · As a result, we have developed and adopted a gasket with heat resistant and chlorine resistant properties.
  · Because we offer a wide range of stainless steel SUS Top Systems, joining of mid to large diameter stainless steel piping is made easy via combinations of top joint epoxy-coated products and Nylon-coated products.
  · Pipe treatment and joining are simpler and faster than when threaded fittings or weld joining is used.
  · Structurally strong and flexible against pipe sagging and stretching (able to support loop piping, etc.).
  · Fitting suppresses elastic flexibility, supporting the R-5 and R-11, by providing unevenness on the mating surface of the housing.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	31.26 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Sortie supérieure, T-2, à vis

  RIKEN

  Not suitable for use with stainless steel pipe as dissimilar metal joint would result.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	18.41 €
  Délai d'expédition minimum ：	12 jours

  *Prix unitaire/configuration de base

Loading...