Résultats de la recherche “make to order”

• 

  Blue Sheet #3000

  YUTAKA MAKE

  [Features]
  - By molding and welding eyelets of the same material as the sheet (polyethylene), deformation is small and occurs without peeling and loss, thereby achieving great strength.
  - Combines UV stabilizers, and offers excellent outdoor weather resistance.
  [Use]
  - Machine covers, curing sheets etc.

  Configurer maintenant
  à partir de∗ ：	21.79 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Edge protection seal profiles

  GANTER

  GN 2182 edge protection seal profiles can be used to seal doors, covers and hatches. The profiles are pressed by hand onto the front of metal sheets and plates. The embedded clamp insert prevents detachment. Glue or other adhesives are not required.
  When assembled, the profile should deform slightly according to w2. This ensures an optimal seal. Adherance to the guideline placement radii (r1...r4) is recommended in order to ensure a tight profile seal and to make assembly easier.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Produits de mesure/maintenance>
  • Matériel de protection / de garniture>
  • Garnitures

  Configurer maintenant
  à partir de∗ ：	160.58 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Tube en spirale fendu

  CHIYODA TSUSHO

  A slitted spiral tube that makes it possible to replace electric wiring.
  
  [Features]
  · Slit machining.
  · Thanks to the slit on the tube, it is possible to perform wire replacement.
  · Wire protection.
  · Best suited for protecting electrical wires from scraping damage within cableveyors, etc., by placing wiring inside air tubes.
  · One-touch fittings can be used for air piping.
  · Special orders accepted

  • Composants mécaniques>
  • Équipement pneumatique>
  • Tuyaux / accessoires pour tuyaux

  Configurer maintenant
  à partir de∗ ：	48.43 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Mini tambour de bande polygonale【5 pièces par conditionnement】

  ICHIGUCHI

  • Remise sur volume

  • Fournitures industrielles>
  • Abrasifs pour meulage et polissage>
  • Roues avec arbres

  Configurer maintenant
  à partir de∗ ：	59.74 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Guides linéaires / Petit chariot / SBI-SV

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  Fichiers CAD 2D / 3D disponibles

  • Composants mécaniques>
  • Mouvement linéaire>
  • Guides linéaires>
  • Guides linéaires standard

  Configurer maintenant
  Délai d'expédition minimum ：	10 jours

• • En promotion

  

  Edge protection profiles

  GANTER

  GN 2184 edge protection profiles are installed on the front edge of metal sheets and plates. They protect the surfaces from damage by sharp edges. The edge finish additionally achieves an optical decorative effect, while the need for potential further treatment such as burring and chamfering of cut or laser-cut metal sheets is reduced to an absolute minimum.
  Adhering to the guideline placement radii (r1...r3) is recommended in order to guarantee permanent profile placement and to make assembly easier. Assembly can be carried out by hand, or alternatively with a soft-face hammer. The embedded clamp insert prevents it from detaching. Glue or other adhesive is not required.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Produits de mesure/maintenance>
  • Matériel de protection / de garniture>
  • Garnitures

  Configurer maintenant
  à partir de∗ ：	86.52 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  ZP2-*H / K / U, Ventouse sans trace

  SMC

  [Features]
  · Avoids leaving any suction marks (rubber components) on the workpiece.
  · Prevents the pad (rubber) and the workpiece from sticking together.
  · Compatible with ZP series bellows pads (ø6 to ø32).

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Composants pour systèmes de vide>
  • Ventouses / composants d'aspiration>
  • Ventouses

  Configurer maintenant
  à partir de∗ ：	6.27 €
  Délai d'expédition minimum ：	22 jours

  *Prix unitaire/configuration de base

• 

  Mini bande polygonale

  ICHIGUCHI

  • Remise sur volume

  • Fournitures industrielles>
  • Abrasifs pour meulage et polissage>
  • Roues avec arbres

  Configurer maintenant
  à partir de∗ ：	5.62 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  AC20D-40D-A (FRL), Nouveau modèle modulaire, filtre régulateur + filtre micronique

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle.
  · Weight reduction: reduced by up to 90 g
  · Without corrosion. The use of a resin body ensures there is no rusting.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Équipement pneumatique>
  • Filtres/régulateurs/lubrificateurs>
  • Unités FRL

  Configurer maintenant
  à partir de∗ ：	61.53 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Edge protection seal profiles

  GANTER

  GN 2180 edge protection seal profiles can be used to seal doors, covers and hatches. The profiles are pressed by hand onto the front of metal sheets and plates. The embedded clamp insert prevents detachment. Glue or other adhesives are not required.
  When assembled, the profile should deform slightly according to w2. This ensures an optimal seal. Adherance to the guideline placement radii (r1... r4) is recommended in order to ensure a tight profile seal and to make assembly easier.
  The NBR profiles are recommended for use in cases where contact with fuels, oils or coolants can occur.
  EPDM profiles are certified according to UL 50 and UL 94-HB and are therefore approved for the US-American and the Canadian market.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Produits de mesure/maintenance>
  • Matériel de protection / de garniture>
  • Garnitures

  Configurer maintenant
  à partir de∗ ：	150.92 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Connecteur circuit imprimé à câble intégré avec pas de 2mm, série DF4

  HIROSE ELECTRONIC

  Connector for direct board-to-cable connection with 2-mm pitch. By directly attaching the terminal insertion socket into the circuit board, the header cost can be minimized.
  
  [Features]
  ・Minimizes header cost: using a dual insertion-removal socket and directly attached connector terminal harness, both circuit boards can have their separate functions used as-is, reducing the required number of headers for a dual terminal socket harness from 2 to 1.
  ・Small type/multi-pin: a wide range of small types with a number of pins.
  ・Circuit board mounting height: 4.3 mm (1 crimp attachment array), maximum pin number: 32 (2 crimp attachment arrays).
  ・Temporary circuit board fastening mechanism: Connector can be temporarily affixed to the circuit board in order to make insertion easier.

  • Remise sur volume

  • Câbles et Connecteurs>
  • Connecteurs (usage général)>
  • Connecteurs carrés

  Configurer maintenant
  à partir de∗ ：	0.04 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Visseuse électrique D-331 / D-332

  HOZAN

  An electric screwdriver equipped with a cushioned handle that is highly effective for slip prevention.
  [Features]
  · Elastomer resin is used for slip prevention of the handle component.
  · Tightly fits on to the handle body and exhibits excellent gripping performance.
  · Has a handle shape that makes pressing the screwdriver against screws easy so that force can be transferred well.
  · The tip has been magnetically processed to hold screws and the handle is made of polypropylene resin and is lightweight.
  · A design without plating in order to avoid changes in tip precision.
  [Applications]
  · Ideal for screw tightening work in deep and narrow spaces.
  · Electric type screwdriver that can be easily pushed and turned, recommended for the Licensed Electrician Proficiency Test.

  • Remise sur volume

  • Fournitures industrielles>
  • Outils manuels>
  • Tournevis

  Configurer maintenant
  à partir de∗ ：	10.86 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  MY1H-Z, Vérin sans tige à entraînement direct, Type de guide linéaire sans bloc butée

  SMC

  With the MY1H-Z series, piping is possible from the 4 directions of the head cover.
  [Features]
  · Piping on site is adjustable depending on the state of the installation.
  · Adjusting the cushion needle is easy.

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Équipement pneumatique>
  • Vérins / actionneurs rotatifs / pinces pneumatiques>
  • Vérins pneumatiques à glissière

  Configurer maintenant
  à partir de∗ ：	17.21 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  AC10B-40B-A (FRL), Nouveau modèle modulaire, filtre à air + régulateur

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle.
  · Weight reduction: reduced by up to 90 g
  · Without corrosion. The use of a resin body ensures there is no rusting.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Équipement pneumatique>
  • Filtres/régulateurs/lubrificateurs>
  • Unités FRL

  Configurer maintenant
  à partir de∗ ：	36.69 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur circuit imprimé à câble (pas de 1.25mm, double rangée, profil bas) - série DF14【1-100 pièces par conditionnement】

  HIROSE ELECTRONIC

  Connector for board-to-cable connection with 1.25-mm pitch. A low-profile type with a lower circuit board mounting height.
  
  [Features]
  · Thin type.
  · A dedicated right-angle connector to achieve a low-profile on top of circuit boards.
  · Circuit board mounting height: 2.5 mm.
  · This makes it possible to draw signals from places where there is no space between the circuit boards.
  · In addition, the profile of the offset type is lower than the board mounting height of 1.6 mm.
  · Supports automatic mounting.
  · The header has a vacuum absorption surface. Therefore, automatic mounting by embossed packing is possible.
  · Additionally, magazine packing is also available for the on-board type.
  · Four-walled type prevents socket from scraping the circuit board.
  · Header includes a box structure to prevent twisting to ensure incorrect insertion is completely prevented. Circuit board also includes walls to prevent damage caused by scraping when performing insertion and removal from the socket.
  · Additionally, a reinforcement bracket is included to prevent solder from peeling.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Remise sur volume

  • Câbles et Connecteurs>
  • Connecteurs (usage général)>
  • Connecteurs carrés

  Configurer maintenant
  à partir de∗ ：	0.65 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Indexing plungers for precision locating

  GANTER

  Indexing plungers GN 817.3 realize a reasonable priced precision locating when guide bushes DIN 179 are used.
  For this purpose a guide bush DIN 179 is used as guide, whereby the dimension l3 of the plunger determines the length of the bush.
  The precise location is, therefore, not dependent on the guide pin in the plunger, but on the accuracy of the guide bush (bore tolerance F7) and the plunger (tolerance h7). Both components are hardened and ground. It goes without saying that the bush length also influences the accuracy of the positioning.
  Type C is used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Positionnement, gabarits et fixations>
  • Plongeurs, doigts diviseurs>
  • Doigts diviseurs

  Configurer maintenant
  à partir de∗ ：	27.02 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés (pas de 0.6mm, hauteur 5 à 16mm) - série FX8C

  HIROSE ELECTRONIC

  The height between boards can be selected from 5 to 16 mm. Although it is compact, it has a guiding mechanism to improve operability. Can use for a wide range of equipment.
  
  [Features]
  · Stacking height 3 mm to 16 mm compatible.
  · Stacking height between boards of 3 mm to 16 mm is applicable.
  ▪ SMT co‐planarity.
  ▪ The SMT solder part lead's co-planarity maintains high precision and 0.1 mm or less.
  · Fit guiding.
  · Although very small in size, importance is placed on fit operability by providing a guiding rib with a self-alignment of ± 0.6 mm.
  · Protects against incorrect insertion into the circuit board.
  · Equipped with a circuit board positioning boss, which prevents incorrect insertion into the circuit board by leveraging the position and diameter of the boss.
  · Two-part integrated product.
  · This novel, two-piece integrated product is available for all terminal pin number configurations and makes it possible to maintain mounting position accuracy. This is achieved by consolidating two connectors using a unique method, which improves fitting reliability when using two fine-pitch connectors. (The standard fitting pitch between the two rows for the two-piece integrated version is 11 mm.)
  
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Remise sur volume

  • Câbles et Connecteurs>
  • Connecteurs (usage général)>
  • Connecteurs entre circuits imprimés

  Configurer maintenant
  à partir de∗ ：	2.85 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur DN pour interface type profil bas, petit format

  HIROSE ELECTRONIC

  This small, multi-pin rectangular connector was developed to support the miniaturization of electronic devices, and thinner devices in particular
  
  [Features]
  · The terminal's wire connector is arrayed in a 2.54 mm grid that makes it easy to design circuits on a printed circuit board.
  · The structure of the terminal is based on the manufacturer's SM series (D-sub connectors). This gives the terminal dependable quality.
  · The single-action lock mechanism provides excellent operability.
  · The cover case is designed to be thin and compact and features a low profile in order to meet the needs of high-density mounting. Mounting with 17.78 mm (700 mils) between circuit boards is possible.
  · The cover case is made of an aluminum die casting offering good electromagnetic shielding characteristics. Combined with the connector's metal shell, the above configuration ensures that noise is reduced.
  · The dip connector includes a snap (circuit board temporary joint) bracket.
  · Pressure Connecting type supports connection of two wire types, AWG 26 and 28, via pressure welding, for use with standard 1.27-mm pitch cables.
  · Crimping type can be used to perform crimping of AWG 26 to 28 wiring.
  · Depending on the application, cable can be extracted in either the vertical or horizontal direction.

  • Remise sur volume

  • Câbles et Connecteurs>
  • Connecteurs (usage général)>
  • Connecteurs carrés

  Configurer maintenant
  à partir de∗ ：	3.98 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  M(D)SUB*1~20, Table rotative, modèle de base

  SMC

  A rotary actuator with a lightweight and compact table, suitable for robot hands.
  [Features]
  · Free mount type.
  & nbspCan be mounted in 3 directions; axial, lateral, vertical.
  · Single vane and double vane types now standard.
  · The double vane type has the same dimensions as the single vane type.

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Équipement pneumatique>
  • Vérins / actionneurs rotatifs / pinces pneumatiques>
  • Actionneurs rotatifs

  Configurer maintenant
  à partir de∗ ：	367.08 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  SYJA7000, Electrovanne 4 / 5 voies à commande pneumatique

  SMC

  An air operated valve made by SMC.
  [Features]
  · Manifolds that are the same as for SYJ3000/5000/7000 series are available.

  Fichiers CAD 3D disponibles

  • Composants mécaniques>
  • Équipement pneumatique>
  • Électrovannes / vannes pneumatiques pour fluides

  Configurer maintenant
  à partir de∗ ：	56.79 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

Loading...