COMPONENTS FOR POSITIONING

Select basic shape according to mold size, mold temperature, plate processing method, installation method, positioning method. Pin or block, tapered or straight.
Select the necessary precision(components precision, tapering angle, clearance)according to molding products tolerance and angle.

Part Number			Shape			Positioning precision
Set	Pin only	Bushing only				Group	Ext. dia. or External tolerance	Tapered section to outer diameter or Component concentricity of straight part	Angle of tapering shape or Clearance of straight shape
TPN	-	-	Pin	Tapered shape	Standard type	Standard	k6	Match mark type	1° 3° 5° 10°
TPNV	TPNVP	TPNVB						0.01 or less	1° 3° 5°
VTPN	VTPNP	VTPNB				Precision	+0.005 0	0.005 or less	1° 3° 5°
ZTPN	ZTPNP	ZTPNB				Extra Precision		0.003 or less	0.5° 1° 3°
TPNC	-	-			Bushing PL installation type	Standard	k6	Match mark type	1° 3° 5°
TPV	TPVP	TPVB						0.01 or less	1° 3° 5°
VTPV	VTPVP	VTPVB				Precision	+0.005 0	0.005 or less	1° 3° 5°
ZTPV	ZTPVP	ZTPVB				Extra Precision		0.003 or less	1° 3°
TPVX	TPVXP	TPVXB			Pin·Bushing PL installation type	Standard	k6	0.01 or less	1° 3° 5°
VTPVX	VTPVXP	VTPVXB				Precision	+0.005 0	0.005 or less
TPNF	TPNFP	TPNFB		Straight shape	Standard type	Precision		0.003 or less	0~0.010
TPNFC	TPNFCP	TPNFCB			Bushing PL installation type
TPNFCX	TPNFCXP	TPNFCXB			Pin·Bushing PL installation type
-	F-TPNFP	F-TPNFB			Head type		0 -0.005		-
-	PPD□ PPDF□	-						-
	PPH□ PPHF□	-
	PPI	-				Standard	0 -0.01
	PPIR	-

Part Number			Shape			Positioning precision
Set	Pin only	Bushing only				Group	Ext. dia. or External tolerance	Tapered section to outer diameter or Symmetry tolerance of straight part	Angle of tapering shape or Clearance of straight shape
TBS	-	-	Block	Tapered shape	Burrow installation	Standard	+0.02 0	Matches the external combining pin and bushing.	1° 3° 5°
VTBS	VTBSP	VTBSB				Precision	0 -0.005	0.005 or less	1° 3° 5°
TBSF	-	-		Straight shape	Burrow installation	Precision	0 -0.005	0.003 or less	0.005~0.015
TBSFM	-	-
VTBSF	-	-				Extra Precision		0.003 or less	0.002~0.008
TSSBN	-	-			Side installation	Precision	0 -0.01	0.003 or less	0.003~0.013
TSST	-	-		Tapered shape		Precision	0 -0.005	0.003 or less	1° 3°
TSSB	-	-		Straight shape		Precision	0 -0.005	0.003 or less	0.005~0.015
TSSBM	-	-
VTSSB	-	-				Extra Precision	0 -0.005	0.003 or less	0.002~0.008
TTSB	-	-			Burrow installation	Precision	0 -0.005	0.003 or less	0.005~0.015
VTTSB	-	-				Extra Precision		Matches the external combining pin and bushing.	0~0.006
LBJX	LBJXP	LBJXB				Standard	0 -0.005	-	0.005~0.020
LKWN	-	-	(Matches tapering on the plate.)				-		-