Fraises HSS carrées（work material：Aluminium Page 2）
Rechercher en précisant la catégorie inférieure
| Nombre de jours d'expédition |
|
|---|
?* À propos du délai d'expédition et des prix
-
AS Coated Powdered High-Speed Steel Square End Mill, 3-Flute, 50° Spiral, Short
MISUMI
The cutting performance is greatly improved by having the AS coating with high heat resistance- Remise sur volume
- AS
- 3 Flutes
- S (Short)
› Configurer maintenantà partir de∗ ： 35.08 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, 50° Spiral, Short
MISUMI
The cutting performance is greatly improved by having the AS coating with high heat resistance- Remise sur volume
- AS
- 4 Flutes
- S (Short)
› Configurer maintenantà partir de∗ ： 37.99 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
AS Coated Powdered High-Speed Steel Square End Mill, 3-Flute, 50° Spiral, Short, with Nicked Peripheral Cutting Edge
MISUMI
The cutting performance is greatly improved by having the AS coating with high heat resistance- Remise sur volume
- AS
- 3 Flutes
- S (Short)
› Configurer maintenantà partir de∗ ： 46.01 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, 50° Spiral, Short, with Nicked Peripheral Cutting Edge
MISUMI
The cutting performance is greatly improved by having the AS coating with high heat resistance- Remise sur volume
- AS
- 4 Flutes
- S (Short)
› Configurer maintenantà partir de∗ ： 46.26 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short
MISUMI
AS coating with the film hardness and heat resistance that withstand a various applications- Remise sur volume
- AS
- 2 Flutes
- S (Short)
› Configurer maintenantà partir de∗ ： 27.51 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long
MISUMI
AS coating with the film hardness and heat resistance that withstand a various applications- Remise sur volume
- AS
- 2 Flutes
- L (Long)
› Configurer maintenantà partir de∗ ： 31.08 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular
MISUMI
The strong helix of positive blade is ideal in the standing-wall finishing of raw materials- Remise sur volume
- AS
- 4 Flutes
- R (Regular)
› Configurer maintenantà partir de∗ ： 31.38 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Long
MISUMI
High durability is achieved for a wide range of materials from raw materials to heat-treated steel- Remise sur volume
- AS
- 4 Flutes
- L (Long)
› Configurer maintenantà partir de∗ ： 33.05 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short
MISUMI
Powdered HSS with high durability is available more cheaply than the cobalt HSS market price- Remise sur volume
- TiCN
- 2 Flutes
- S (Short)
› Configurer maintenantà partir de∗ ： 23.33 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular
MISUMI
Amazing unbeatable prices- Remise sur volume
- TiCN
- 2 Flutes
- R (Regular)
› Configurer maintenantà partir de∗ ： 25.29 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long
MISUMI
Amazing unbeatable prices- Remise sur volume
- TiCN
- 2 Flutes
- L (Long)
› Configurer maintenantà partir de∗ ： 17.95 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short
MISUMI
Powdered HSS with high durability is available more cheaply than the cobalt HSS market price- Remise sur volume
- TiCN
- 4 Flutes
- S (Short)
› Configurer maintenantà partir de∗ ： 18.82 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular
MISUMI
Amazing unbeatable prices- Remise sur volume
- TiCN
- 4 Flutes
- R (Regular)
› Configurer maintenantà partir de∗ ： 18.82 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute / Regular
MISUMI
Amazing unbeatable prices- Remise sur volume
- TiCN
- 4 Flutes
- L (Long)
› Configurer maintenantà partir de∗ ： 18.82 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
AS Coated High-Speed Steel Square End Mill, 2-Flute, Short
MISUMI
AS coating that provides improved processing efficiency in high-speed steel end mill- Remise sur volume
- AS
- 2 Flutes
- S (Short)
› Configurer maintenantà partir de∗ ： 20.04 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
AS Coated High-Speed Steel Square End Mill, 2-Flute / Long
MISUMI
AS coating that provides improved processing efficiency in high-speed steel end mill- Remise sur volume
- AS
- 2 Flutes
- L (Long)
› Configurer maintenantà partir de∗ ： 23.44 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
AS Coated High-Speed Steel Square End Mill, 4-Flute / Short
MISUMI
The durability has been remarkably improved with the superior heat resistance and film hardness of the AS coating over conventional products- Remise sur volume
- AS
- 4 Flutes
- S (Short)
› Configurer maintenantà partir de∗ ： 22.17 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
AS Coated High-Speed Steel Square End Mill, 4-Flute / Regular
MISUMI
The durability has been remarkably improved with the superior heat resistance and film hardness of the AS coating over conventional products- Remise sur volume
- AS
- 4 Flutes
- R (Regular)
› Configurer maintenantà partir de∗ ： 23.56 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
AS Coated High-Speed Steel Square End Mill, 4-Flute / Long
MISUMI
The durability has been remarkably improved with the superior heat resistance and film hardness of the AS coating over conventional products- Remise sur volume
- AS
- 4 Flutes
- L (Long)
› Configurer maintenantà partir de∗ ： 26.77 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Powdered High-Speed Steel Square End Mill, 2-Flute, Short / Non-Coated Model
MISUMI
A lineup of powdered high speed steel non-coated type from short to long- Remise sur volume
- Non-Coated
- 2 Flutes
- S (Short)
› Configurer maintenantà partir de∗ ： 18.92 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Powdered High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model
MISUMI
A lineup of powdered high speed steel non-coated type from short to long- Remise sur volume
- Non-Coated
- 2 Flutes
- R (Regular)
› Configurer maintenantà partir de∗ ： 19.98 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model
MISUMI
A lineup of powdered high speed steel non-coated type from short to long- Remise sur volume
- Non-Coated
- 2 Flutes
- L (Long)
› Configurer maintenantà partir de∗ ： 23.76 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Powdered High-Speed Steel Square End Mill, 4-Flute / Short / Non-Coated Model
MISUMI
Powdered high-speed steel and non-coated 4-flute series- Remise sur volume
- Non-Coated
- 4 Flutes
- S (Short)
› Configurer maintenantà partir de∗ ： 21.82 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Powdered High-Speed Steel Square End Mill, 4-Flute / Regular / Non-Coated Model
MISUMI
Powdered high-speed steel and non-coated 4-flute series- Remise sur volume
- Non-Coated
- 4 Flutes
- R (Regular)
› Configurer maintenantà partir de∗ ： 22.54 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Powdered High-Speed Steel Square End Mill, 4-Flute / Regular / Non-Coated Model
MISUMI
Powdered high-speed steel and non-coated 4-flute series- Remise sur volume
- Non-Coated
- 4 Flutes
- L (Long)
› Configurer maintenantà partir de∗ ： 26.12 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model
MISUMI
The non-coated 2-flute type is available from φ1 up to φ50- Remise sur volume
- Non-Coated
- 2 Flutes
- R (Regular)
› Configurer maintenantà partir de∗ ： 11.31 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
High-Speed Steel Square End Mill, 4-Flute, Short / Non-Coated Model
MISUMI
40° helix that's stronger than the 2-flute type is ideal for side milling- Remise sur volume
- Non-Coated
- 4 Flutes
- S (Short)
› Configurer maintenantà partir de∗ ： 12.05 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
High-Speed Steel Square End Mill, 4-Flute, Regular / Non-Coated Model
MISUMI
40° helix that's stronger than the 2-flute type is ideal for side milling- Remise sur volume
- Non-Coated
- 4 Flutes
- R (Regular)
› Configurer maintenantà partir de∗ ： 14.55 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
High-Speed Steel Square End Mill, 4-Flute, Long / Non-Coated Model
MISUMI
40° helix that's stronger than the 2-flute type is ideal for side milling- Remise sur volume
- Non-Coated
- 4 Flutes
- L (Long)
› Configurer maintenantà partir de∗ ： 16.74 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
High-Speed Steel Corner C End Mill, 2-Flute / Short Model
MISUMI
End mill series with the C surface that can be selected in 0.1 mm increments- Non-Coated
- 2 Flutes
- S (Short)
› Configurer maintenantDélai d'expédition minimum ： 7 jours -
High-Speed Steel Corner C End Mill, 2-Flute / Regular Model
MISUMI
End mill series with the C surface that can be selected in 0.1 mm increments- Non-Coated
- 2 Flutes
- R (Regular)
› Configurer maintenantDélai d'expédition minimum ： 7 jours -
High-Speed Steel Corner C End Mill, 4-Flute / Short Model
MISUMI
End mill series with the C surface that can be selected in 0.1 mm increments- Non-Coated
- 4 Flutes
- S (Short)
› Configurer maintenantDélai d'expédition minimum ： 7 jours -
High-Speed Steel Corner C End Mill, 4-Flute / Regular Model
MISUMI
End mill series with the C surface that can be selected in 0.1 mm increments- Non-Coated
- 4 Flutes
- R (Regular)
› Configurer maintenantDélai d'expédition minimum ： 7 jours -
High-Speed Steel Blade Relief End Mill, 2-Flute / Short Model
MISUMI
A blade relief type end mill that's not affected by the interference of tools- Non-Coated
- 2 Flutes
- S (Short)
› Configurer maintenantDélai d'expédition minimum ： 7 jours -
High-Speed Steel Blade Relief End Mill, 2-Flute / Regular Model
MISUMI
A blade relief type end mill that's not affected by the interference of tools- Non-Coated
- 2 Flutes
- R (Regular)
› Configurer maintenantDélai d'expédition minimum ： 7 jours -
High-Speed Steel Blade Relief End Mill, 4-Flute / Short Model
MISUMI
A blade relief type end mill that's not affected by the interference of tools- Non-Coated
- 4 Flutes
- S (Short)
› Configurer maintenantDélai d'expédition minimum ： 7 jours -
High-Speed Steel Blade Relief End Mill, 4-Flute / Regular Model
MISUMI
A blade relief type end mill that's not affected by the interference of tools- Non-Coated
- 4 Flutes
- R (Regular)
› Configurer maintenantDélai d'expédition minimum ： 7 jours -
High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Short
MISUMI
Can be freely selected in 0.01 mm increments while being affordable- Non-Coated
- 2 Flutes
- S (Short)
› Configurer maintenantDélai d'expédition minimum ： 7 jours -
High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Regular
MISUMI
Can be freely selected in 0.01 mm increments while being affordable- Non-Coated
- 2 Flutes
- R (Regular)
› Configurer maintenantDélai d'expédition minimum ： 7 jours -
Fraise AG, pour usage intensif AGHV
NACHI(FUJIKOSHI)
Capable of high-efficiency roughing of materials from steel to stainless steel and aluminum. Suitable for medium finishing.› Configurer maintenantà partir de∗ ： 53.49 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Fraise G standard, 4 cannelures 4GE
NACHI(FUJIKOSHI)
It is a general-purpose coating end drill for machining from steel and stainless steel to aluminum. Suitable for side surface machining.› Configurer maintenantà partir de∗ ： 45.91 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Fraise G longue, 2 cannelures SL2GE
NACHI(FUJIKOSHI)
Capable of machining from steel and stainless steel to aluminum. Suitable for grooving deep grooves or in deep locations.- Remise sur volume
› Configurer maintenantà partir de∗ ： 50.14 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Fraise SG-FAX, type long, 2 cannelures SL2SGE
NACHI(FUJIKOSHI)
General purpose coated end mill.
[Features]
· Capable of machining from steel and stainless steel to aluminum.
· Suitable for grooving deep grooves or in deep locations.› Configurer maintenantà partir de∗ ： 72.81 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Fraise SG-FAX, 2 cannelures 2SGE
NACHI(FUJIKOSHI)
Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum.› Configurer maintenantà partir de∗ ： 61.41 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
SG-FAX pour usage intensif SGHV
NACHI(FUJIKOSHI)
Capable of high-efficiency roughing of materials from steel to stainless steel and aluminum. Suitable for medium finishing.› Configurer maintenantà partir de∗ ： 82.71 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
| Marque |
|---|
| Série du produit |
| à partir de∗ |
| Délai d'expédition minimum |
| Spécifications |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| work material |
| Blade shape type |
| Number of flutes(sheet) |
| Tool Material Type |
| Machining Application |
| Shank diameter (d)(mm) |
| Coating |
| Overall Length (L)(mm) |
| Torsion Angle (θ) |
| Base Blade Y/N |
| Underneck length (ℓ1)(mm) |
| shank |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Marque | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) |
| Série du produit | AS Coated Powdered High-Speed Steel Square End Mill, 3-Flute, 50° Spiral, Short | AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, 50° Spiral, Short | AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short | AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long | AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular | AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Long | TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short | TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular | TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long | TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short | TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular | TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute / Regular | AS Coated High-Speed Steel Square End Mill, 4-Flute / Regular | Powdered High-Speed Steel Square End Mill, 2-Flute, Short / Non-Coated Model | Powdered High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model | Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model | Powdered High-Speed Steel Square End Mill, 4-Flute / Short / Non-Coated Model | Powdered High-Speed Steel Square End Mill, 4-Flute / Regular / Non-Coated Model | Powdered High-Speed Steel Square End Mill, 4-Flute / Regular / Non-Coated Model | High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model | High-Speed Steel Square End Mill, 4-Flute, Short / Non-Coated Model | High-Speed Steel Square End Mill, 4-Flute, Regular / Non-Coated Model | High-Speed Steel Square End Mill, 4-Flute, Long / Non-Coated Model | High-Speed Steel Blade Relief End Mill, 2-Flute / Short Model | High-Speed Steel Blade Relief End Mill, 2-Flute / Regular Model | High-Speed Steel Blade Relief End Mill, 4-Flute / Short Model | High-Speed Steel Blade Relief End Mill, 4-Flute / Regular Model | High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Short | High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Regular | ||||||||||||||||
| à partir de∗ | 35.08 € *Prix unitaire/configuration de base Remise sur volume | 37.99 € *Prix unitaire/configuration de base Remise sur volume | 46.01 € *Prix unitaire/configuration de base Remise sur volume | 46.26 € *Prix unitaire/configuration de base Remise sur volume | 27.51 € *Prix unitaire/configuration de base Remise sur volume | 31.08 € *Prix unitaire/configuration de base Remise sur volume | 31.38 € *Prix unitaire/configuration de base Remise sur volume | 33.05 € *Prix unitaire/configuration de base Remise sur volume | 23.33 € *Prix unitaire/configuration de base Remise sur volume | 25.29 € *Prix unitaire/configuration de base Remise sur volume | 17.95 € *Prix unitaire/configuration de base Remise sur volume | 18.82 € *Prix unitaire/configuration de base Remise sur volume | 18.82 € *Prix unitaire/configuration de base Remise sur volume | 18.82 € *Prix unitaire/configuration de base Remise sur volume | 20.04 € *Prix unitaire/configuration de base Remise sur volume | 23.44 € *Prix unitaire/configuration de base Remise sur volume | 22.17 € *Prix unitaire/configuration de base Remise sur volume | 23.56 € *Prix unitaire/configuration de base Remise sur volume | 26.77 € *Prix unitaire/configuration de base Remise sur volume | 18.92 € *Prix unitaire/configuration de base Remise sur volume | 19.98 € *Prix unitaire/configuration de base Remise sur volume | 23.76 € *Prix unitaire/configuration de base Remise sur volume | 21.82 € *Prix unitaire/configuration de base Remise sur volume | 22.54 € *Prix unitaire/configuration de base Remise sur volume | 26.12 € *Prix unitaire/configuration de base Remise sur volume | 11.31 € *Prix unitaire/configuration de base Remise sur volume | 12.05 € *Prix unitaire/configuration de base Remise sur volume | 14.55 € *Prix unitaire/configuration de base Remise sur volume | 16.74 € *Prix unitaire/configuration de base Remise sur volume | - | - | - | - | - | - | - | - | - | - | 53.49 € *Prix unitaire/configuration de base | 45.91 € *Prix unitaire/configuration de base | 50.14 € *Prix unitaire/configuration de base | 72.81 € *Prix unitaire/configuration de base | 61.41 € *Prix unitaire/configuration de base | 82.71 € *Prix unitaire/configuration de base |
| Délai d'expédition minimum | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 7 jours | 7 jours | 7 jours | 7 jours | 7 jours | 7 jours | 7 jours | 7 jours | 7 jours | 7 jours | 6 jours | 6 jours | 6 jours | 6 jours | 6 jours | 6 jours |
| Spécifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
| Blade diameter (D)(φ) | 6 ～ 25 | 6 ～ 25 | 6 ～ 20 | 6 ～ 20 | 1 ～ 40 | 3 ～ 20 | 3 ～ 25 | 3 ～ 25 | 1 ～ 40 | 1 ～ 25 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 1 ～ 50 | 3 ～ 40 | 3 ～ 40 | 3 ～ 30 | 3 ～ 40 | 1 ～ 40 | 1 ～ 25 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 1 ～ 25 | 3 ～ 40 | 3 ～ 30 | 3 ～ 40 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 8 ～ 25 | 8 ～ 25 | 8 ～ 25 | 8 ～ 25 | 2.7 ～ 25 | 2.7 ～ 24.99 | 3 ～ 50 | 2.5 ～ 50 | 3 ～ 40 | 3 ～ 30 | 1.5 ～ 30 | 3 ～ 50 |
| Blade length (ℓ)(mm) | 15 ～ 50 | 15 ～ 50 | 15 ～ 45 | 15 ～ 45 | 2.5 ～ 65 | 15 ～ 75 | 12 ～ 68 | 15 ～ 90 | 2.5 ～ 65 | 3.5 ～ 60 | 15 ～ 90 | 8 ～ 45 | 12 ～ 68 | 15 ～ 90 | 2.5 ～ 75 | 15 ～ 110 | 8 ～ 65 | 12 ～ 68 | 15 ～ 110 | 2.5 ～ 65 | 3.5 ～ 60 | 15 ～ 90 | 8 ～ 45 | 12 ～ 68 | 15 ～ 90 | 3.5 ～ 60 | 8 ～ 65 | 12 ～ 68 | 15 ～ 110 | 8 ～ 50 | 10 ～ 60 | 8 ～ 45 | 12 ～ 68 | - | - | - | - | 8 ～ 50 | 10 ～ 60 | 9 ～ 70 | 7 ～ 70 | 15 ～ 125 | 15 ～ 90 | 3 ～ 55 | 9 ～ 70 |
| work material | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] | Aluminium[○] |
| Blade shape type | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Carré | Ébauche | Carré | Carré | Carré | Carré | Ébauche |
| Number of flutes(sheet) | 3 | 4 | 3 | 4 | 2 | 2 | 4 | 4 | 2 | 2 | 2 | 4 | 4 | 4 | 2 | 2 | 4 | 4 | 4 | 2 | 2 | 2 | 4 | 4 | 4 | 2 | 4 | 4 | 4 | 2 | 2 | 4 | 4 | 2 | 2 | 4 | 4 | 2 | 2 | 4 ～ 6 | 4 | 2 | 2 | 2 | 4 ～ 6 |
| Tool Material Type | Acier rapide à poudre | Acier rapide à poudre | Acier rapide à poudre | Acier rapide à poudre | Acier rapide à poudre | Acier rapide à poudre | Acier rapide à poudre | Acier rapide à poudre | Acier rapide à poudre | Acier rapide à poudre | Acier rapide à poudre | Acier rapide à poudre | Acier rapide à poudre | Acier rapide à poudre | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Acier rapide à poudre | Acier rapide à poudre | Acier rapide à poudre | Acier rapide à poudre | Acier rapide à poudre | Acier rapide à poudre | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Alliage HSS | Alliage HSS | Alliage HSS |
| Machining Application | Rabot / Latéral / Rainure / Coupes inclinées / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure / Coupes inclinées / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure | Rabot / Latéral / Rainure | Rabot / Latéral / Rainure | Rabot / Latéral / Rainure | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Rabot / Latéral / Rainure / Chanfreinage | Latéral / Rainure | Rabot / Latéral / Rainure / Coupes inclinées | Rabot / Latéral / Rainure / Coupes inclinées | Rabot / Latéral / Rainure / Coupes inclinées | Rabot / Latéral / Rainure / Coupes inclinées | Latéral / Rainure |
| Shank diameter (d)(mm) | 8 ～ 25 | 8 ～ 25 | 8 ～ 20 | 8 ～ 20 | 6 ～ 32 | 6 ～ 20 | 6 ～ 25 | 6 ～ 25 | 6 ～ 32 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 42 | 6 ～ 32 | 6 ～ 32 | 6 ～ 25 | 6 ～ 32 | 6 ～ 32 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 32 | 6 ～ 25 | 6 ～ 32 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 10 ～ 25 | 10 ～ 25 | 10 ～ 25 | 10 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 42 | 6 ～ 42 | 6 ～ 32 | 6 ～ 25 | 6 ～ 25 | 6 ～ 42 |
| Coating | Pour dureté élevée (Silicon Group) | Pour dureté élevée (Silicon Group) | Pour dureté élevée (Silicon Group) | Pour dureté élevée (Silicon Group) | Pour dureté élevée (Silicon Group) | Pour dureté élevée (Silicon Group) | Pour dureté élevée (Silicon Group) | Pour dureté élevée (Silicon Group) | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | Pour dureté élevée (Silicon Group) | Pour dureté élevée (Silicon Group) | Pour dureté élevée (Silicon Group) | Pour dureté élevée (Silicon Group) | Pour dureté élevée (Silicon Group) | Non revêtu | Non revêtu | Non revêtu | Non revêtu | Non revêtu | Non revêtu | Non revêtu | Non revêtu | Non revêtu | Non revêtu | TiCN / Non revêtu | TiCN / Non revêtu | TiCN / Non revêtu | TiCN / Non revêtu | TiCN / Non revêtu | TiCN / Non revêtu | TiCN / Non revêtu | TiCN / Non revêtu | TiCN / Non revêtu | TiCN / Non revêtu | AG | TiN | TiN | TiCN | TiCN | TiCN |
| Overall Length (L)(mm) | 65 ～ 140 | 65 ～ 140 | 65 ～ 125 | 65 ～ 125 | 45 ～ 150 | 60 ～ 140 | 55 ～ 144 | 60 ～ 160 | 45 ～ 150 | 45 ～ 130 | 60 ～ 160 | 52 ～ 121 | 55 ～ 144 | 60 ～ 160 | 45 ～ 165 | 60 ～ 195 | 52 ～ 150 | 55 ～ 144 | 60 ～ 195 | 45 ～ 150 | 45 ～ 130 | 60 ～ 160 | 52 ～ 121 | 55 ～ 144 | 60 ～ 160 | 45 ～ 130 | 52 ～ 150 | 55 ～ 144 | 60 ～ 195 | 50 ～ 120 | 50 ～ 130 | 52 ～ 121 | 55 ～ 144 | 60 ～ 120 | 60 ～ 130 | 69 ～ 121 | 78 ～ 144 | 50 ～ 120 | 50 ～ 130 | 50 ～ 160 | 50 ～ 160 | 60 ～ 210 | 65 ～ 180 | 50 ～ 135 | 50 ～ 160 |
| Torsion Angle (θ) | Hélice à pas rapide (45˚ à 60˚) | Hélice à pas rapide (45˚ à 60˚) | Hélice à pas rapide (45˚ à 60˚) | Hélice à pas rapide (45˚ à 60˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) | Hélice standard (30˚ à 40˚) |
| Base Blade Y/N | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | - | - | - | - | - | - |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| shank | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filtrer par :
Stock
-
- Afficher les articles en stock uniquement
-
Blade diameter (D)(φ)
-
0.45～0.95
- 0.45
- 0.8
- 0.9
- 0.95
-
1～1.9
- 1
- 1/2
- 1.05
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.59
- 1.6
- 1.7
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.38
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.97
- 3
- 3/4
- 3.1
- 3.18
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
- 3.97
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.76
- 4.8
- 4.9
-
5～5.9
- 5
- 5/8
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.56
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.05
- 6.1
- 6.2
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.94
- 7
- 7/8
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
- 7.94
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.53
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.11
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.29
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.7
- 15.8
- 15.88
- 15.9
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.46
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.9
- 19
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.6
- 19.7
- 19.8
- 19.9
-
20～20.9
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.64
- 20.7
- 20.8
- 20.9
-
21～21.9
- 21
- 21.1
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.7
- 21.8
- 21.9
-
22～22.9
- 22
- 22.1
- 22.2
- 22.23
- 22.3
- 22.4
- 22.5
- 22.6
- 22.7
- 22.8
- 22.9
-
23～23.9
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.7
- 23.8
- 23.81
- 23.9
-
24～24.9
- 24
- 24.1
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.7
- 24.8
- 24.9
-
25～25.9
- 25
- 25.1
- 25.2
- 25.3
- 25.4
- 25.5
- 25.6
- 25.7
- 25.8
- 25.9
-
26～26.9
- 26
- 26.1
- 26.2
- 26.3
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
- 26.9
-
27～27.9
- 27
- 27.1
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.7
- 27.8
- 27.9
-
28～28.9
- 28
- 28.1
- 28.2
- 28.3
- 28.4
- 28.5
- 28.6
- 28.7
- 28.8
- 28.9
-
29～29.9
- 29
- 29.1
- 29.2
- 29.3
- 29.4
- 29.5
- 29.6
- 29.7
- 29.8
- 29.9
-
30～30.9
- 30
- 30.1
- 30.2
- 30.3
- 30.4
- 30.5
- 30.6
- 30.7
- 30.8
- 30.9
-
31～31.9
- 31
- 31.1
- 31.2
- 31.3
- 31.4
- 31.5
- 31.6
- 31.7
- 31.75
- 31.8
- 31.9
-
32～32.9
- 32
- 32.1
- 32.2
- 32.3
- 32.4
- 32.5
- 32.6
- 32.7
- 32.8
- 32.9
-
33～33.9
- 33
- 33.1
- 33.2
- 33.3
- 33.4
- 33.5
- 33.6
- 33.7
- 33.8
- 33.9
-
34～34.9
- 34
- 34.1
- 34.2
- 34.3
- 34.4
- 34.5
- 34.6
- 34.7
- 34.8
- 34.9
-
35～35.9
- 35
- 35.1
- 35.2
- 35.3
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
- 35.9
-
36～36.9
- 36
- 36.1
- 36.2
- 36.3
- 36.4
- 36.5
- 36.6
- 36.7
- 36.8
- 36.9
-
37～37.9
- 37
- 37.1
- 37.2
- 37.3
- 37.4
- 37.5
- 37.6
- 37.7
- 37.8
- 37.9
-
38～38.9
- 38
- 38.1
- 38.2
- 38.3
- 38.4
- 38.5
- 38.6
- 38.7
- 38.8
- 38.9
-
39～39.9
- 39
- 39.1
- 39.2
- 39.3
- 39.4
- 39.5
- 39.6
- 39.7
- 39.8
- 39.9
-
40～40.9
- 40
- 40.1
- 40.2
- 40.3
- 40.4
- 40.5
- 40.6
- 40.7
- 40.8
- 40.9
-
41～41.9
- 41
- 41.1
- 41.2
- 41.3
- 41.4
- 41.5
- 41.6
- 41.7
- 41.8
- 41.9
-
42～42.9
- 42
- 42.1
- 42.2
- 42.3
- 42.4
- 42.5
- 42.6
- 42.7
- 42.8
- 42.9
-
43～43.9
- 43
- 43.1
- 43.2
- 43.3
- 43.4
- 43.5
- 43.6
- 43.7
- 43.8
- 43.9
-
44～44.9
- 44
- 44.1
- 44.2
- 44.3
- 44.4
- 44.5
- 44.6
- 44.7
- 44.8
- 44.9
-
45～45.5
- 45
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.5
- 47
- 47.5
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
85
-
90
-
95
-
100
[2.7-3/0.01φunités][3.15-3.5/0.01φunités][3.6-4/0.01φunités][4.05-16/0.01φunités][17-19.99/0.01φunités][20.01-22.99/0.01φunités][24-25/0.01φunités]
-
-
Blade length (ℓ)(mm)
-
work material
- Acier général
- Acier trempé et durci
- Acier à dureté élevée
- Acier inoxydable
- Fonte
- Aluminium
- Titane
- Cuivre
- Résine
- Autre
- Autre 2
- Autre 3
- Autre 4
-
Blade shape type
- Carré
- Ébauche
- Pour rainure de clavette
-
Number of flutes(sheet)
-
Tool Material Type
- Cobalt HSS
- Acier rapide à poudre
- Acier rapide
- Alliage HSS
-
Machining Application
-
Shank diameter (d)(mm)
-
Coating
-
Overall Length (L)(mm)
-
Torsion Angle (θ)
-
Base Blade Y/N
-
Underneck length (ℓ1)(mm)
-
shank
Fabricant
Type de données CAO
-
- 2D
- 3D
Catégories relatives à « Fraises HSS carrées »
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.