Couronnes de perçage（Page 4）

?* À propos du délai d'expédition et des prix

• 

  Jeu de forets à tige droite SD

  NACHI(FUJIKOSHI)

  A general-purpose HSS drill which is used for the widest range of applications.
  [Features]
  · Corresponds to the JIS standard.
  [Applications]
  · Usable in a wide range of applications.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	3.07 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Foret à pointer AG à longue tige AGSTDLS

  NACHI(FUJIKOSHI)

  Long shank type starting HSS drill for deep locations or avoiding interference.
  [Features]
  · Capable of speedy centering, chamfering and V-grooving and boasts a long service life.
  · Highly accurate positioning is possible with good bite.
  · The sharp blade produces a beautifully finished surface.
  [Applications]
  · Can be used with outstanding positioning accuracy for various processing, from chamfering to V groove machining.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	32.76 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Foret AG-ES AGES

  NACHI(FUJIKOSHI)

  Coated high-speed drill that realizes high speeds and high feed rates approaching that of carbide drills.
  [Features]
  · New AG coating with excellent heat resistance and abrasion resistance is the best match for next generation high alloy high-speed steel.
  · 50C type capable of high-speed machining at a cutting speed of 60 m/min.
  · Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum.
  · The next generation of high alloy steel HSS achieves both anti-chipping performance and friction resistance performance.
  [Applications]
  · Also convenient for lathes where stable machining of carbide is difficult and low-rigidity processing machines.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	16.40 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret DLC HSS DLCHD

  NACHI(FUJIKOSHI)

  High-speed drill for high efficiency machining of aluminum alloys.
  [Features]
  · It utilizes DLC coating (diamond-like carbon) with high hardness, a low coefficient of friction and abrasion resistance.
  · Has low adhesion and eliminates troubles such as chip clogging which are likely to occur in aluminum processing.
  [Applications]
  · The coefficient of friction is small, and since the aluminum is unlikely to weld, high friction efficiency with aluminum alloys is demonstrated.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	7.31 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Foret G type court GSS

  NACHI(FUJIKOSHI)

  Short type straight shank drill with a TiN coated surface.
  [Features]
  · The original thinning shape (3-rake) improves centripedality and chip separation.
  · TiN coating achieves longer life.
  [Applications]
  · Capable of high efficiency machining of materials ranging from steel to stainless steel and aluminum. High positional accuracy can be obtained.

  • Remise sur volume

  • Stock

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	10.27 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Foret SG-ES SGES

  NACHI(FUJIKOSHI)

  HSS drill of the highest quality featuring a long service life, with high-grade powder HSS and SG coating.
  [Features]
  · High-grade powdered high-speed steel and SG coating allows the HSS drill to have the longest life possible.
  · Optimized cutting edge, groove shape and high precision achieve stable processing and high hole positioning accuracy.
  · Achieves high-efficiency machining based on high speed and high feed.
  · Allows high-speed, high-efficiency machining up to mold steel and aluminum.
  * Cannot be used for austenitic stainless steel.
  [Applications]
  · Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum, enabling high precision drilling.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	13.18 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Foret SG-FAX avec trou d'huile SGOH

  NACHI(FUJIKOSHI)

  Oil hole HSS drill of the highest quality featuring a long service life, with high-grade powder HSS and SG coating.
  [Features]
  · Optimized cutting edge, groove shape and high precision achieve stable processing and high hole positioning accuracy.
  · Achieves high-efficiency machining based on high speed and high feed.
  [Applications]
  · Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	243.56 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua EX type standard AQDEXR

  NACHI(FUJIKOSHI)

  Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
  [Features]
  · Shape of the new cutting edge greatly improves chip discharge performance.
  · The cutting resistance is reduced to provide stable machining even on small machines.
  · A special lubrication function film is provided on the surface layer of the AlCrSi coating.
  · Longer life by improving lubricity and heat/abrasion resistance.
  · The unique thinning shape increases biting and reduces cutting resistance.
  [Applications]
  · Ideal for thin work materials and small low-rigidity processing machines.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	100.98 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua FC AQDFC

  NACHI(FUJIKOSHI)

  A carbide drill with an optimum design for FC materials that provides a longer service life than conventional products.
  [Features]
  · Combination of cemented carbide ideal for FC material and Aquacoat with excellent heat and wear resistance.
  · Longer life than conventional FC drills.
  · The special cutting edge treatment suppresses wear of the corners most easily damaged in FC processing.
  · A lifetime of 70% of that of new products is guaranteed after re-grinding, even if there is no recoating.
  [Applications]
  · Ideal for long life machining of FC, FCD, and low carbon steel.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	104.47 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua type dur AQDH

  NACHI(FUJIKOSHI)

  Carbide drill capable of high efficiency machining of high-hardness steel of 50 to 70 HRC.
  [Features]
  · It uses carbide alloy ideal for high-hardness steel machining and AquaCoat, which has excellent heat resistance and abrasion resistance.
  · Wear resistance and chipping resistance are greatly improved.
  · Uses a thick core and weak torsion.
  · The high rigidity makes it resistant against vibration as well, preventing damage from microchipping, etc.
  [Applications]
  · High performance machining of 50 to 70 HRC high hardness steel is possible.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	29.65 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Micro-foret Aqua AQMD

  NACHI(FUJIKOSHI)

  A drill that is difficult to break and stable for machining.
  [Features]
  · Employs cemented carbide ideal for small diameter hole drilling.
  · A drill with high rigidity is used.
  · The cutting load has been reduced by circumferential clearance and thinning.
  [Applications]
  · Hard to break and capable of stable processing thanks to the high-rigidity shape and the use of carbide alloy ideal for small diameter drilling work.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	32.85 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Foret à tige conique en cobalt COTD

  NACHI(FUJIKOSHI)

  A general-purpose cobalt drill that can handle anything from steel to stainless steel and aluminum.
  [Features]
  · Cobalt HSS with excellent wear resistance and heat resistance is used for the main body.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	61.25 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret à tige droite type long LSD

  NACHI(FUJIKOSHI)

  A general-purpose long drill which is used for the widest range of applications.
  [Features]
  · It supports various drilling depths, so the optimal drill for the processing can be selected from an abundant choice of sizes (groove length, full length).

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	11.09 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Foret AG Power type long AGPLSD

  NACHI(FUJIKOSHI)

  A drill that can steplessly drill deep holes up to L/D20.
  [Features]
  · Adopts AG coating with excellent wear resistance to realize a longer life.
  · Chip-flow is improved while maintaining rigidity thanks to its non-stepped slot shape.
  [Applications]
  · Ideal for deep hole machining for anything from raw materials to mold steel.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	21.65 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret G avec trou d'huile GOH

  NACHI(FUJIKOSHI)

  General purpose coated oil hole drill.
  [Features]
  · The original thinning shape (3-rake) improves centripedality and chip separation.
  · TiN coating and internal lubrication provide a cooling effect that results in a long D lifetime.
  [Applications]
  · Capable of high efficiency machining of materials ranging from steel to stainless steel and aluminum.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	271.45 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret G type long GLSD

  NACHI(FUJIKOSHI)

  Coated drill for deep holes.
  [Features]
  · It discharges chips well, making it ideal for drilling deep holes and deep positions.
  · Chip-flow is improved while maintaining rigidity thanks to its non-stepped slot shape.
  · TiN coating adopted to achieve a longer life even for deep holes.
  [Applications]
  · It discharges cutting chips well even for deep holes, enabling high-efficiency machining.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	43.51 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Foret Aqua EX type extra-court AQDEXS

  NACHI(FUJIKOSHI)

  Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
  [Features]
  · Shape of the new cutting edge greatly improves chip discharge performance.
  · The cutting resistance is reduced to provide stable machining even on small machines.
  · A special lubrication function film is provided on the surface layer of the AlCrSi coating to improve the lubricity, heat resistance and abrasion resistance, thereby prolonging the service life.
  [Applications]
  · The unique thinning shape increases biting and reduces cutting resistance.
  · Stable cutting performance even with thin work materials and small low-rigidity processing machines.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	85.93 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret à tige conique TD

  NACHI(FUJIKOSHI)

  A general-purpose drill used in the widest ranges of applications.
  [Features]
  · A standard drill that corresponds to the JIS standard.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	51.18 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret AG-SUS, type court AGSUSS

  NACHI(FUJIKOSHI)

  Drill capable of stable hole drilling with AG coating excellent in heat resistance.
  [Features]
  · Newly developed optimal drill shape adopted for machining high alloy HSS, AG coatings, and stainless steel.
  · It has a cutting edge shape that's excellent in the segmentation of chips and a groove shape that achieves both high chip discharge performance and drill rigidity.
  · Stable machining accuracy is achieved by using a high-precision end mill shank.
  [Applications]
  · Optimal for stainless steel.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	7.00 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Foret AG-SUS type standard AGSUSR

  NACHI(FUJIKOSHI)

  Drill capable of stable hole drilling with AG coating excellent in heat resistance.
  [Features]
  · Newly developed optimal drill shape adopted for machining high alloy HSS, AG coatings, and stainless steel.
  · It has a cutting edge shape that's excellent in the segmentation of chips and a groove shape that achieves both high chip discharge performance and drill rigidity.
  · Stable machining accuracy is achieved by using a high-precision end mill shank.
  [Applications]
  · Optimal for stainless steel.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	7.81 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret DLC type standard DLCDR

  NACHI(FUJIKOSHI)

  A drill for high-speed wet machining and dry machining of aluminum alloys.
  [Features]
  · It utilizes DLC coating (diamond-like carbon) with high hardness, a low coefficient of friction and abrasion resistance.
  · Dry machining of aluminum alloy is possible.
  · Melting induced adhesion is minimal due to the low friction coefficient of the DLC coating and special groove shape, also making chips less likely to clog.
  · Allows also non-step boring of hole depth 5D.
  [Applications]
  · Capable of dry machining of aluminum alloy, and non-step machining of hole depths up to 3D.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	52.71 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Micro-forets DLC DLCMD

  NACHI(FUJIKOSHI)

  An aluminum drill for small diameter hole drilling, which performs high speed wet and dry machining of aluminum alloys.
  [Features]
  · It utilizes DLC coating (diamond-like carbon) with high hardness, a low coefficient of friction and abrasion resistance.
  · Melting induced adhesion is minimal due to the low friction coefficient of the DLC coating and special groove shape, also making chips less likely to clog.
  · Allows non-step boring of hole depth 5D.
  [Applications]
  · Capable of dry machining of aluminum alloy, and non-step machining of hole depths up to 3D.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	37.54 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Foret Aqua EX avec trou d'huile 3D AQDEXOH3D

  NACHI(FUJIKOSHI)

  Aqua Drill EX series solid carbide drills with internal coolant.
  [Features]
  · Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
  · Aqua EX coating achieves stable long life.
  [Applications]
  · Stable processing of mild steel to high hardness materials.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	120.16 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua EX avec trou d'huile 8D AQDEXOH8D

  NACHI(FUJIKOSHI)

  Aqua Drill EX series solid carbide drills with internal coolant.
  [Features]
  · Product lineup is for 3D, 5D and 8D boring depths.
  · Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
  · Aqua EX coating achieves stable long life.
  [Applications]
  · Stable processing of mild steel to high hardness materials.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	127.62 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Foret Aqua type extra-court AQDS

  NACHI(FUJIKOSHI)

  A carbide drill that demonstrates outstanding performance in dry processing and high speed wet processing.
  [Features]
  · Adopts Aquacoat with excellent heat resistance and rich lubrication with the work material.
  · Aqua coating and groove shape for excellent chipping discharge, enabling consistent hole drilling.
  · Chipping resistance and corner abrasion resistance are improved due to the special cutting edge shape.
  · High-speed wet machining is 2 to 3 times that of other companies' products, with dry machining efficiency equal to or greater than that of wet machining.
  [Applications]
  · Ideal for high-speed and long-life machining for anything from raw materials to high-hardness steel.
  · Drill for dry machining.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	72.39 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Carbure avec revêtement diamant D-GDN

  OSG

  Demonstrates power in machining not only aluminum alloys, but also high silicone aluminum alloys where carbide drills have extremely short lives

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	94.07 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  En carbure type extra-long avec trou de graissage pour moules métalliques haute dureté FTO-H-GDXL

  OSG

  Achieves 20D deep drilling of high hardness mold materials (45 to 55 HRC) with high stability, long life, and high efficiency

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	227.50 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  En carbure pour acier haute dureté, type extra-court FH-GDS

  OSG

  Developed for machining small diameter holes in hardened steel, it is suitable for high-precision and long-life machining of shallow holes (up to 3D or so)

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	52.37 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret en carbure de très faible diamètre, type 10D UVM-DRL-10D

  OSG

  Enables unprecedented ultra-small diameter drilling range with a minimum diameter of φ0.02.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	106.94 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret en carbure de très faible diamètre, type 5D UVM-DRL-5D

  OSG

  Enables unprecedented ultra-small diameter drilling range with a minimum diameter of φ0.02.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	91.21 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret de tête en carbure de très faible diamètre UVM-LDS

  OSG

  The collaboration with UVM-DRL enables high-precision drilling

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	153.29 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Tige MT pour acier inoxydable / acier doux MT-SUS-GDR

  OSG

  MT shank is added, expanding the usage in general purpose machines.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	45.86 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Nexus type standard NEXUS-GDR

  OSG

  Drill with WDI coating suitable for stainless steel, mild steel, aluminum alloy, copper alloy and the like that suppresses peripheral margin wear and achieves long service life at high speeds

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	26.20 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  HSS type extra-long type 20D TDXL20D

  OSG

  HSS Drill for Machining Extra-Deep Holes Up to 20 D

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	33.50 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Tige MT pour usinage général, type standard EX-MT-GDR

  OSG

  Suitable for lathes and multi-axis dedicated machines.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	59.52 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Type extra-court pour usinage général EX-GDS

  OSG

  Thanks to its high-rigidity groove form and stub groove length, it provides high efficiency and high precision and is ideal for pilot hole tapping and lathe processing.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	14.70 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Type moyen pour usinage général EX-GDN

  OSG

  The groove length is between the stubby and regular sizes and achieves non-step high speed machining up to 4 times the diameter, even for small diameters

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	9.06 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Type standard pour usinage général EX-GDR

  OSG

  High-versatility type capable of non-step high-speed machining of up to 4 to 5 times the diameter

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	22.30 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Longue tige type extra-court pour usinage général EX-LS-GDS

  OSG

  Suitable for machining parts adjacent to horizontal machinery, walls, and jigs, where good reach is required.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	18.61 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Trou d'huile pour usinage général, type standard EX-HO-GDR

  OSG

  Thanks to the oil hole, high-efficiency processing and long service life are achieved, making it effective for difficult-to-machine materials such as stainless steel

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	73.18 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Poudre HSS pour traitement haute vitesse, type standard VP-GDR

  OSG

  Super Premium High + V coating enables high-speed machining similar to the carbide drill

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	11.08 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Poudre HSS pour traitement haute vitesse avec trou d'huile VP-HO-GDR

  OSG

  Powdered high-speed steel + V coating with an oil hole allow high speed machining that can exceed the power of carbide drills

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	193.30 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Poudre HSS pour traitement haute vitesse avec trou d'huile, type extra-court VP-HO-GDS

  OSG

  Powdered high-speed steel + V coating with an oil hole allow high speed machining that can exceed the power of carbide drills

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	85.58 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Pour le retrait des prises électriques endommagées EX-H-DRL

  OSG

  Used for damaged tap removal and missing drill holes in hardened steel (58 to 68 HRC) and stellite, etc.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	41.10 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Pour tours V-MT-GDN

  OSG

  V-coated tapered shank and medium type drill with special attention given to reducing thrust and improving usability with lathes

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	66.00 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

Loading...