TSC series carbide ball end mill, short model (Numéros de référence)
- Remise sur volume
- TS
- General Steel
- 2 Flutes
- S (Short)
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Shank Diameter (d) (mm) | R Precision (μm) | Inventory Classification | Outer Diameter D (mm) | Figure | Length Under Neck (θ) (Degree) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
36.07 € | 1 | Disponible | 5 jours | 1.45 | 3.5 | 40 | - | 4 | ±0.005 | Stocked Product | 2.9 | 1 | 10° | |
40.14 € | 1 | Disponible | 5 jours | 1.55 | 4 | 40 | - | 4 | ±0.005 | Stocked Product | 3.1 | 1 | 10° | |
53.92 € | 1 | Disponible | 5 jours | 1.65 | 4 | 40 | - | 4 | ±0.005 | Stocked Product | 3.3 | 1 | 10° | |
31.36 € | 1 | Disponible | 5 jours | 1.75 | 5 | 40 | - | 4 | ±0.005 | Stocked Product | 3.5 | 1 | 10° | |
41.52 € | 1 | Disponible | 5 jours | 1.85 | 5 | 40 | - | 4 | ±0.005 | Stocked Product | 3.7 | 1 | 10° | |
18.29 € | 1 | Disponible | 5 jours | 2 | 6 | 50 | - | 6 | ±0.005 | Stocked Product | 4 | 1 | 10° | |
18.66 € | 1 | Disponible | 5 jours | 2 | 6 | 50 | - | 4 | ±0.005 | Stocked Product | 4 | 2 | - | |
62.43 € | 1 | Disponible | 5 jours | 2.2 | 6 | 50 | - | 6 | ±0.005 | Stocked Product | 4.4 | 1 | 10° | |
63.92 € | 1 | Disponible | 5 jours | 2.3 | 6 | 50 | - | 6 | ±0.005 | Stocked Product | 4.6 | 1 | 10° | |
49.21 € | 1 | Disponible | 5 jours | 2.4 | 6 | 50 | - | 6 | ±0.005 | Stocked Product | 4.8 | 1 | 10° | |
24.16 € | 1 | Disponible | 5 jours | 2.5 | 8 | 50 | - | 6 | ±0.005 | Stocked Product | 5 | 1 | 10° | |
49.21 € | 1 | Disponible | 5 jours | 2.6 | 8 | 50 | - | 6 | ±0.005 | Stocked Product | 5.2 | 1 | 10° | |
49.21 € | 1 | Disponible | 5 jours | 2.15 | 6 | 50 | - | 6 | ±0.005 | Stocked Product | 4.3 | 1 | 10° | |
76.07 € | 1 | Disponible | 5 jours | 2.35 | 6 | 50 | - | 6 | ±0.005 | Stocked Product | 4.7 | 1 | 10° | |
58.59 € | 1 | Disponible | 5 jours | 2.75 | 8 | 50 | - | 6 | ±0.005 | Stocked Product | 5.5 | 1 | 10° | |
25.50 € | 1 | Disponible | 5 jours | 3 | 10 | 60 | - | 6 | -0.007 ~ +0.003 | Stocked Product | 6 | 2 | - | |
38.92 € | 1 | Disponible | 5 jours | 3.5 | 12 | 60 | - | 8 | -0.007 ~ +0.003 | Stocked Product | 7 | 1 | 10° | |
43.21 € | 1 | Disponible | 5 jours | 4 | 13 | 60 | - | 8 | -0.007 ~ +0.003 | Stocked Product | 8 | 2 | - | |
66.26 € | 1 | Disponible | 5 jours | 4.5 | 14 | 70 | - | 10 | -0.007 ~ +0.003 | Stocked Product | 9 | 1 | 10° | |
49.24 € | 1 | Disponible | 5 jours | 5 | 15 | 80 | - | 10 | -0.007 ~ +0.003 | Stocked Product | 10 | 2 | - | |
102.20 € | 1 | Disponible | 5 jours | 5.5 | 15 | 80 | - | 12 | -0.007 ~ +0.003 | Stocked Product | 11 | 1 | 10° | |
73.10 € | 1 | Disponible | 5 jours | 6 | 15 | 80 | - | 12 | -0.007 ~ +0.003 | Stocked Product | 12 | 2 | - | |
180.83 € | 1 | Disponible | 5 jours | 7 | 15 | 80 | - | 12 | ±0.01 | Stocked Product | 14 | 3 | - | |
183.65 € | 1 | Disponible | 5 jours | 8 | 20 | 150 | - | 16 | ±0.01 | Stocked Product | 16 | 2 | - | |
249.76 € | 1 | Disponible | 5 jours | 10 | 25 | 150 | - | 20 | ±0.01 | Stocked Product | 20 | 2 | - |
Loading...
Spécifications
| Model Number | Shank Diameter d |
Flute Length ℓ |
Outer Diameter D |
Overall Length L |
Under Neck Angle θ |
Figure | ||
| Tip R |
Shank Diameter d |
|||||||
| TSC-BEM2S | 0.05 | - | 3 | 0.2 | 0.1 | 40 | 10° | 1 |
| 0.1 | - | 3 | 0.4 | 0.2 | 40 | 10° | 1 | |
| 0.1 | 6 | 6 | 0.4 | 0.2 | 50 | 15° | 1 | |
| 0.15 | - | 3 | 0.6 | 0.3 | 40 | 10° | 1 | |
| 0.2 | - | 3 | 0.8 | 0.4 | 40 | 10° | 1 | |
| 0.2 | 6 | 6 | 0.8 | 0.4 | 50 | 15° | 1 | |
| 0.25 | - | 3 | 1 | 0.5 | 40 | 10° | 1 | |
| 0.3 | - | 3 | 1.2 | 0.6 | 40 | 10° | 1 | |
| 0.3 | 6 | 6 | 1.2 | 0.6 | 50 | 15° | 1 | |
| 0.35 | - | 3 | 1.4 | 0.7 | 40 | 10° | 1 | |
| 0.4 | - | 3 | 1.6 | 0.8 | 40 | 10° | 1 | |
| 0.4 | 6 | 6 | 1.6 | 0.8 | 50 | 15° | 1 | |
| 0.45 | - | 3 | 1.8 | 0.9 | 40 | 10° | 1 | |
| 0.5 | - | 4 | 2 | 1 | 40 | 10° | 1 | |
| 0.5 | 6 | 6 | 2 | 1 | 50 | 15° | 1 | |
| 0.55 | - | 4 | 2.2 | 1.1 | 40 | 10° | 1 | |
| 0.6 | - | 4 | 2.4 | 1.2 | 40 | 10° | 1 | |
| 0.65 | - | 4 | 2.6 | 1.3 | 40 | 10° | 1 | |
| 0.7 | - | 4 | 2.8 | 1.4 | 40 | 10° | 1 | |
| 0.75 | - | 4 | 3 | 1.5 | 40 | 10° | 1 | |
| 0.75 | 6 | 6 | 3 | 1.5 | 50 | 15° | 1 | |
| 0.8 | - | 4 | 3 | 1.6 | 40 | 10° | 1 | |
| 0.85 | - | 4 | 3 | 1.7 | 40 | 10° | 1 | |
| 0.9 | - | 4 | 3 | 1.8 | 40 | 10° | 1 | |
| 0.95 | - | 4 | 3 | 1.9 | 40 | 10° | 1 | |
| 1 | - | 4 | 3 | 2 | 40 | 10° | 1 | |
| 1 | 6 | 6 | 3 | 2 | 50 | 15° | 1 |
[ ! ]For shank diameter (d) specifications listed in blue, specify both a tip (R) and shank diameter (d).
| Model Number | Shank Diameter d |
Flute Length ℓ |
Outer Diameter D |
Overall Length L |
Under Neck Angle θ |
Figure | ||
| Tip R |
Shank Diameter d |
|||||||
| TSC-BEM2S | 1.05 | - | 4 | 3 | 2.1 | 40 | 10° | 1 |
| 1.1 | - | 4 | 3 | 2.2 | 40 | 10° | 1 | |
| 1.15 | - | 4 | 3 | 2.3 | 40 | 10° | 1 | |
| 1.2 | - | 4 | 3 | 2.4 | 40 | 10° | 1 | |
| 1.25 | - | 4 | 3.5 | 2.5 | 40 | 10° | 1 | |
| 1.3 | - | 4 | 3.5 | 2.6 | 40 | 10° | 1 | |
| 1.4 | - | 4 | 3.5 | 2.8 | 40 | 10° | 1 | |
| 1.45 | - | 4 | 3.5 | 2.9 | 40 | 10° | 1 | |
| 1.5 | - | 4 | 4 | 3 | 40 | 10° | 1 | |
| 1.5 | 6 | 6 | 4 | 3 | 60 | 10° | 1 | |
| 1.55 | - | 4 | 4 | 3.1 | 40 | 10° | 1 | |
| 1.6 | - | 4 | 4 | 3.2 | 40 | 10° | 1 | |
| 1.65 | - | 4 | 4 | 3.3 | 40 | 10° | 1 | |
| 1.7 | - | 4 | 4 | 3.4 | 40 | 10° | 1 | |
| 1.75 | - | 4 | 5 | 3.5 | 40 | 10° | 1 | |
| 1.8 | - | 4 | 5 | 3.6 | 40 | 10° | 1 | |
| 1.85 | - | 4 | 5 | 3.7 | 40 | 10° | 1 | |
| 1.9 | - | 4 | 5 | 3.8 | 40 | 10° | 1 | |
| 2 | 4 | 4 | 6 | 4 | 50 | - | 2 | |
| 2 | - | 6 | 6 | 4 | 50 | 10° | 1 | |
| 2.15 | - | 6 | 6 | 4.3 | 50 | 10° | 1 | |
| 2.2 | - | 6 | 6 | 4.4 | 50 | 10° | 1 | |
| 2.3 | - | 6 | 6 | 4.6 | 50 | 10° | 1 | |
| 2.35 | - | 6 | 6 | 4.7 | 50 | 10° | 1 | |
| 2.4 | - | 6 | 6 | 4.8 | 50 | 10° | 1 | |
| 2.5 | - | 6 | 8 | 5 | 50 | 10° | 1 | |
| 2.6 | - | 6 | 8 | 5.2 | 50 | 10° | 1 | |
| 2.75 | - | 6 | 8 | 5.5 | 50 | 10° | 1 | |
| 3 | - | 6 | 10 | 6 | 60 | - | 2 | |
| 3.5 | - | 8 | 12 | 7 | 60 | 10° | 1 | |
| 4 | - | 8 | 13 | 8 | 60 | - | 2 | |
| 4.5 | - | 10 | 14 | 9 | 70 | 10° | 1 | |
| 5 | - | 10 | 15 | 10 | 80 | - | 2 | |
| 5.5 | - | 12 | 15 | 11 | 80 | 10° | 1 | |
| 6 | - | 12 | 15 | 12 | 80 | - | 2 | |
| 7 | - | 12 | 15 | 14 | 80 | - | 3 | |
| 8 | - | 16 | 20 | 16 | 150 | - | 2 | |
| 10 | - | 20 | 25 | 20 | 150 | - | 2 |
[ ! ]For shank diameter (d) specifications listed in blue, specify both a tip (R) and shank diameter (d).
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● Delivers a finish with a very good working surface roughness after machining.
[ ! ]The following additional processing services are available for the products on this page.
Informations de base
| Model | Bore | Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Acier inoxydable / Fonte / Aluminium / Cuivre | Number of Flutes(sheet) | 2 |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Processing Applications | Curved Surface / Side Surface / Carving / R-Groove | Torsion Availability | Included |
Configurer
Propriétés de base
-
R Size(mm)
-
Flute Length (ℓ)(mm)
[5-20/1mmunités]
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Shank Diameter (d)(mm)
-
R Precision(μm)
-
Inventory Classification
- Cutting Edge R Processing
- Standard Neck Relief
- Stocked Product
-
Type
- SN-TSC-BEM2S
- SNR-TSC-BEM2S
- TSC-BEM2S
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
- 7 jours ou moins
- 8 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.