TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade
Cliquez sur cette image pour l'agrandir.
Cliquez sur cette image pour l'agrandir.
- Remise sur volume
- TS
- High-Hardness Steel
- 2 Flutes
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Référence pièce
|
|---|
| TSC-CHBEM2N1 |
| TSC-CHBEM2N1.5 |
| TSC-CHBEM2N2 |
| TSC-CHBEM2N3 |
| TSC-CHBEM2N5 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Shank Diameter (d) (mm) | Outer Diameter D (mm) | Figure | Length Under Neck (θ) (Degree) | Under Neck Diameter d1 (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
81.62 € | 1 | Disponible | 5 jours | 1 | 1 | 50 | 5 | 6 | 2 | 1 | 10° | 2 | |
87.46 € | 1 | Disponible | 5 jours | 1.5 | 1.5 | 60 | 7.5 | 6 | 3 | 1 | 10° | 3 | |
87.46 € | 1 | Disponible | 5 jours | 2 | 2 | 60 | 10 | 6 | 4 | 1 | 10° | 4 | |
95.43 € | 1 | Disponible | 5 jours | 3 | 3 | 80 | - | 6 | 6 | 2 | - | - | |
97.38 € | 1 | Disponible | 5 jours | 5 | 5 | 90 | - | 10 | 10 | 2 | - | - |
Loading...
Spécifications
| Model Number | Flute Length ℓ |
Outer Diameter D |
Under Neck Diameter d1 |
Length Under Neck ℓ1 |
Overall Length L |
Shank Diameter d |
Figure | |
| Tip R |
||||||||
| TSC-CHBEM2N | 1 | 1 | 2 | 2 | 5 | 50 | 6 | 1 |
| 1.5 | 1.5 | 3 | 3 | 7.5 | 60 | 6 | 1 | |
| 2 | 2 | 4 | 4 | 10 | 60 | 6 | 1 | |
| 3 | 3 | 6 | - | - | 80 | 6 | 2 | |
| 5 | 5 | 10 | - | - | 90 | 10 | 2 |
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
● It adopts a base material with super-ultra-fine particles suitable for high hardness steel machining (as per the results of cutting tests conducted by us).
● A Misumi original shape that has been treated for an extra rigid blade tip and does not have a side-surface cutting edge. High tool rigidity / blade tip hardness yields both a stable blade tip shape and long life when used for high speed milling machines.
● The TS coating consisting of a nitride-based composite film with a fully crystalline structure means that it yields a high oxidation resistance temperature and high hardness. It is ideal for high speed machining and dry machining of heat-treated / high hardness steel.
[ ! ]This product has a special shape with a performance that may not be reproducible without the use of Misumi's dedicated re-grinding.
Informations de base
| Model | Bore | Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / High-Hardness Steel ~ HRC60 / High-Hardness Steel – HRC65 / Acier inoxydable / Fonte | Number of Flutes(sheet) | 2 |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | R Precision(μm) | ±0.01 | Processing Applications | Curved Surface / Side Surface / Carving / R-Groove |
| Inventory Classification | Stocked Product | Torsion Availability | Included |
Configurer
Propriétés de base
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Shank Diameter (d)(mm)
-
Type
- TSC-CHBEM2N
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.