• Marques
  • Société
  • Contact
FR
Type Code Seach | *NOT READY*
#CODE
Suggestion de mots-clés
Suggestions de numéros d'articles
Produits discontinués

Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill (Numéros de référence)

Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

Cliquez sur cette image pour l'agrandir.

Cliquez sur cette image pour l'agrandir.

  • Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill
  • Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill
  • Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

MISUMI

MISUMI

Radius in 0.1 mm increments can be additionally machined with a short delivery time
  • Non-Coated
  • General Steel

Référence pièce

Vous pouvez trouver ici le numéro
de référence lié au produit recherché.

Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill:Related Image
Données à afficher
30
45
60
  1. << Précédent
  2. 1
  3. 2
Référence pièce
SEC-REM4B5-R[0.1-1/0.1]
SEC-REM4B6-R[0.1-1.2/0.1]
SEC-REM4B8-R[0.1-2/0.1]
SEC-REM4B10-R[0.1-3/0.1]
SEC-REM4B12-R[0.1-3/0.1]
SEC-REM4R3-R[0.1-0.7/0.1]
SEC-REM4R3.5-R[0.1-0.7/0.1]
SEC-REM4R4-R[0.1-1/0.1]
SEC-REM4R4.5-R[0.1-1/0.1]
SEC-REM4R5-R[0.1-1/0.1]
SEC-REM4R6-R[0.1-1.2/0.1]
SEC-REM4R8-R[0.1-2/0.1]
SEC-REM4R10-R[0.1-3/0.1]
SEC-REM4R12-R[0.1-3/0.1]
SEC-REM4S3-R[0.1-0.7/0.1]
SEC-REM4S3.5-R[0.1-0.7/0.1]
SEC-REM4S4-R[0.1-1/0.1]
SEC-REM4S4.5-R[0.1-1/0.1]
SEC-REM4S5-R[0.1-1/0.1]
SEC-REM4S5.5-R[0.1-1/0.1]
SEC-REM4S6-R[0.1-1.2/0.1]
SEC-REM4S8-R[0.1-2/0.1]
SEC-REM4S10-R[0.1-3/0.1]
SEC-REM4S12-R[0.1-3/0.1]
TSC-REM2B4-R[0.1-1/0.1]
TSC-REM2L10-R[0.1-3/0.1]
TSC-REM2L12-R[0.1-3/0.1]
TSC-REM2S2.5-R[0.1-0.5/0.1]
TSC-REM4B10-R[0.1-3/0.1]
TSC-REM4B12-R[0.1-3/0.1]
TSC-REM4R10-R[0.1-3/0.1]
TSC-REM4S10-R[0.1-3/0.1]
Référence pièce
Prix unitaire standard
Quantité minimale de commandeRemise sur volume
Jour
d'expédition standard
?
Outer Diameter (D)
(φ) 		R Size
(mm) 		Work Material Flute Length (ℓ)
(mm) 		Number of Flutes
(sheet) 		Overall Length (L)
(mm) 		Shank Diameter (d)
(mm) 		Processing Applications Coating Figure

-

1 7 jours 50.1 ～ 1General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]7.54456Flat Surface / Side Surface / Curved Surface / Inclined CuttingNon revêtu1

-

1 7 jours 60.1 ～ 1.2General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]94456Flat Surface / Side Surface / Curved Surface / Inclined CuttingNon revêtu2

-

1 7 jours 80.1 ～ 2General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]124608Flat Surface / Side Surface / Curved Surface / Inclined CuttingNon revêtu2

-

1 7 jours 10.1 ～ 3General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]1547010Flat Surface / Side Surface / Curved Surface / Inclined CuttingNon revêtu2

-

1 7 jours 10.1 ～ 3General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]1847512Flat Surface / Side Surface / Curved Surface / Inclined CuttingNon revêtu2

-

1 7 jours 30.1 ～ 0.7General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]94456Flat Surface / Side Surface / Curved Surface / Inclined CuttingNon revêtu1

-

1 7 jours 3.50.1 ～ 0.7General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]10.54456Flat Surface / Side Surface / Curved Surface / Inclined CuttingNon revêtu1

-

1 7 jours 40.1 ～ 1General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]124506Flat Surface / Side Surface / Curved Surface / Inclined CuttingNon revêtu1

-

1 7 jours 4.50.1 ～ 1General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]13.54506Flat Surface / Side Surface / Curved Surface / Inclined CuttingNon revêtu1

-

1 7 jours 50.1 ～ 1General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]154556Flat Surface / Side Surface / Curved Surface / Inclined CuttingNon revêtu1

-

1 7 jours 60.1 ～ 1.2General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]184606Flat Surface / Side Surface / Curved Surface / Inclined CuttingNon revêtu2

-

1 7 jours 80.1 ～ 2General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]244708Flat Surface / Side Surface / Curved Surface / Inclined CuttingNon revêtu2

-

1 7 jours 100.1 ～ 3General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]3048010Flat Surface / Side Surface / Curved Surface / Inclined CuttingNon revêtu2

-

1 7 jours 120.1 ～ 3General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]3648512Flat Surface / Side Surface / Curved Surface / Inclined CuttingNon revêtu2

-

1 7 jours 30.1 ～ 0.7General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]64456Flat Surface / Side Surface / Curved Surface / Inclined CuttingNon revêtu2

-

1 7 jours 3.50.1 ～ 0.7General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]74456Flat Surface / Side Surface / Curved Surface / Inclined CuttingNon revêtu1

-

1 7 jours 40.1 ～ 1General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]84456Flat Surface / Side Surface / Curved Surface / Inclined CuttingNon revêtu1

-

1 7 jours 4.50.1 ～ 1General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]94456Flat Surface / Side Surface / Curved Surface / Inclined CuttingNon revêtu1

-

1 7 jours 50.1 ～ 1General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]104456Flat Surface / Side Surface / Curved Surface / Inclined CuttingNon revêtu1

-

1 7 jours 5.50.1 ～ 1General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]114456Flat Surface / Side Surface / Curved Surface / Inclined CuttingNon revêtu1

-

1 7 jours 60.1 ～ 1.2General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]124456Flat Surface / Side Surface / Curved Surface / Inclined CuttingNon revêtu2

-

1 7 jours 80.1 ～ 2General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]164558Flat Surface / Side Surface / Curved Surface / Inclined CuttingNon revêtu2

-

1 7 jours 100.1 ～ 3General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]2046510Flat Surface / Side Surface / Curved Surface / Inclined CuttingNon revêtu2

-

1 7 jours 120.1 ～ 3General Steel[◎] / Heat-Treated Steel[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]2447512Flat Surface / Side Surface / Curved Surface / Inclined CuttingNon revêtu2

-

1 13 jours 40.1 ～ 1General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]62456Flat Surface / Side Surface / Curved Surface / Rainure / Inclined CuttingFor High Hardness (Silicone-Based)1

-

1 13 jours 100.1 ～ 3General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]40210010Flat Surface / Side Surface / Curved Surface / Rainure / Inclined CuttingFor High Hardness (Silicone-Based)2

-

1 13 jours 120.1 ～ 3General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]48210012Flat Surface / Side Surface / Curved Surface / Rainure / Inclined CuttingFor High Hardness (Silicone-Based)2

-

1 13 jours 2.50.1 ～ 0.5General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]52404Flat Surface / Side Surface / Curved Surface / Rainure / Inclined CuttingFor High Hardness (Silicone-Based)1

-

1 13 jours 100.1 ～ 3General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]1547010Flat Surface / Side Surface / Curved Surface / Inclined CuttingFor High Hardness (Silicone-Based)2

-

1 13 jours 120.1 ～ 3General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]1847512Flat Surface / Side Surface / Curved Surface / Inclined CuttingFor High Hardness (Silicone-Based)2

-

1 13 jours 100.1 ～ 3General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]3048010Flat Surface / Side Surface / Curved Surface / Inclined CuttingFor High Hardness (Silicone-Based)2

-

1 13 jours 100.1 ～ 3General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]2046510Flat Surface / Side Surface / Curved Surface / Inclined CuttingFor High Hardness (Silicone-Based)2

Loading...

  1. << Précédent
  2. 1
  3. 2

Spécifications

Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill:Related Image


Model Number
SEC-REM2B / TSC-REM2B
SEC-REM4B / TSC-REM4B (1.5 D Blade Length Type)
Flute Diameter
D		Corner R
0.1 mm Increment Designation		Blade Length
ℓ		Overall Length
L		Shank Diameter
d		Figure
30.1 ~ 0.74.54561
3.50.1 ~ 0.75.254561
40.1 ~ 1.064561
4.50.1 ~ 1.06.754561
50.1 ~ 1.07.54561
5.50.1 ~ 1.08.254561
60.1 ~ 1.294562
80.1 ~ 2.0126082
100.1 ~ 3.01570102
120.1 ~ 3.01875122
160.1 ~ 3.024100162
200.1 ~ 3.030105202

Model Number
SEC-REM2S / TSC-REM2S
SEC-REM4S / TSC-REM4S (2 D Blade Length Type)
Flute Diameter
D		Corner R
0.1 mm Increment Designation		Blade Length
ℓ		Overall Length
L		Shank Diameter
d		Figure
20.1 ~ 0.544041
2.50.1 ~ 0.554041
2.80.1 ~ 0.55.64041
30.1 ~ 0.764561
3.50.1 ~ 0.774561
40.1 ~ 1.084561
4.50.1 ~ 1.094561
50.1 ~ 1.0104561
5.50.1 ~ 1.0114561
60.1 ~ 1.2124562
80.1 ~ 2.0165582
100.1 ~ 3.02065102
120.1 ~ 3.02475122
160.1 ~ 3.032100162
200.1 ~ 3.040105202

Model Number
SEC-REM2SR / TSC-REM2SR (2.5 D Blade Length Type)
 * There is no standard for 4 flutes.iece
1 Piece Unit
Flute Diameter
D		Corner R
0.1 mm Increment Designation		Blade Length
ℓ		Overall Length
L		Shank Diameter
d		Figure
30.1 ~ 0.77.54561
40.1 ~ 1.0105061
50.1 ~ 1.012.55561
60.1 ~ 1.2156062
80.1 ~ 2.0207082
100.1 ~ 3.02580102
120.1 ~ 3.03085122

Model Number
SEC-REM2R / TSC-REM2R
SEC-REM4R / TSC-REM4R (3 D Blade Length Type)
Flute Diameter
D		Corner R
0.1 mm Increment Designation		Blade Length
ℓ		Overall Length
L		Shank Diameter
d		Figure
20.1 ~ 0.564541
2.50.1 ~ 0.57.54541
2.80.1 ~ 0.58.44541
30.1 ~ 0.794561
3.50.1 ~ 0.710.54561
40.1 ~ 1.0125061
4.50.1 ~ 1.013.55061
50.1 ~ 1.0155561
5.50.1 ~ 1.016.55561
60.1 ~ 1.2186062
80.1 ~ 2.0247082
100.1 ~ 3.03080102
120.1 ~ 3.03685122
160.1 ~ 3.048115162
200.1 ~ 3.060125202

Model Number
SEC-REM2RL / TSC-REM2RL (3.5 D Blade Length Type)
 * There is no standard for 4 flutes.
1 Piece Unit
Flute Diameter
D		Corner R
0.1 mm Increment Designation		Blade Length
ℓ		Overall Length
L		Shank Diameter
d		Figure
30.1 ~ 0.710.54561
40.1 ~ 1.0145061
50.1 ~ 1.017.55561
60.1 ~ 1.2216062
80.1 ~ 2.0287082
100.1 ~ 3.03580102
120.1 ~ 3.04295122

Model Number
SEC-REM2L / TSC-REM2L (4 D Blade Length Type) 
* There is no standard for 4 flutes.
1 Piece Unit
Flute Diameter
D		Corner R
0.1 mm Increment Designation		Blade Length
ℓ		Overall Length
L		Shank Diameter
d		Figure
30.1 ~ 0.7125061
40.1 ~ 1.0166061
50.1 ~ 1.0206061
60.1 ~ 1.2246062
80.1 ~ 2.03210082
100.1 ~ 3.040100102
120.1 ~ 3.048100122


For Cutting Conditions, Refer to >>Click here.

Informations de base

Model Radius Torsion Angle (θ) Standard Helix (30 to 40°) R Precision(μm) ±0.02
Additional Classification Manufactured Product

Configurer

Réinitialiser

92Numéro de référence applicable suggérée

Afficher les numéros de référence

Certaines spécifications ne sont pas encore précisées.
Le numéro de référence est identifié.

Propriétés de base

  • Outer Diameter (D)(φ)

    • 1
    • 2
    • 2.5
    • 2.8
    • 3
    • 3.5
    • 4
    • 4.5
    • 5
    • 5.5
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20

    Réinitialiser

  • R Size(mm)

     [0.1-3/0.1mmunités]

    Réinitialiser

  • Flute Length (ℓ)(mm)

    • 4
    • 4.5
    • 5
    • 5.6
    • 6
    • 6.75
    • 7
    • 7.5
    • 8
    • 8.25
    • 8.4
    • 9
    • 10
    • 10.5
    • 11
    • 12
    • 12.5
    • 13.5
    • 14
    • 15
    • 16
    • 16.5
    • 17.5
    • 18
    • 20
    • 21
    • 24
    • 25
    • 28
    • 30
    • 32
    • 35
    • 36
    • 40
    • 42
    • 48
    • 60

    Réinitialiser

  • Number of Flutes(sheet)

    • 2
    • 4

    Réinitialiser

  • Overall Length (L)(mm)

    • 40
    • 45
    • 50
    • 55
    • 60
    • 65
    • 70
    • 75
    • 80
    • 85
    • 95
    • 100
    • 105
    • 115
    • 125

    Réinitialiser

  • Shank Diameter (d)(mm)

    • 4
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20

    Réinitialiser

  • Processing Applications

    • Flat Surface
    • Side Surface
    • Curved Surface
    • Rainure
    • Inclined Cutting

    Réinitialiser

  • Coating

    • For High Hardness (Silicone-Based)
    • Non revêtu

    Réinitialiser

  • Type

    • SEC-REM2B
    • SEC-REM2L
    • SEC-REM2R
    • SEC-REM2RL
    • SEC-REM2S
    • SEC-REM2SR
    • SEC-REM4B
    • SEC-REM4R
    • SEC-REM4S
    • TSC-REM2B
    • TSC-REM2L
    • TSC-REM2S
    • TSC-REM4B
    • TSC-REM4R
    • TSC-REM4S

    Réinitialiser

  • Work Material

    • General Steel
    • Heat-Treated Steel
    • High-Hardness Steel ~ HRC55
    • Acier inoxydable
    • Fonte
    • Aluminum Alloy
    • Copper Alloy

    Réinitialiser

Filtrer par jours d'expédition standard

Propriétés optionnelles

Assistance technique

Question technique

Mode de paiement

  • Facture
  • Prépaiement
  • PayPal

Fabrication à la demande

Changer de vue

Certificats

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI dans le monde

Social Media

Informations légales

Copyright © MISUMI Corporation All Rights Reserved.