High-Speed Steel Corner C End Mill, 2-Flute / Short Model
- Non-Coated
- 2 Flutes
- S (Short)
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Référence pièce
|
|---|
| CEM2S3-C[0.1-0.7/0.1] |
| CEM2S4-C[0.1-1/0.1] |
| CEM2S5-C[0.1-1/0.1] |
| CEM2S6-C[0.1-1.2/0.1] |
| CEM2S7-C[0.1-1.4/0.1] |
| CEM2S8-C[0.1-1.4/0.1] |
| CEM2S9-C[0.1-2/0.1] |
| CEM2S10-C[0.1-3/0.1] |
| CEM2S11-C[0.1-3/0.1] |
| CEM2S12-C[0.1-3/0.1] |
| CEM2S13-C[0.1-3.5/0.1] |
| CEM2S14-C[0.1-3.5/0.1] |
| CEM2S15-C[0.1-4/0.1] |
| CEM2S16-C[0.1-4/0.1] |
| CEM2S18-C[0.1-4/0.1] |
| CEM2S20-C[0.1-4.5/0.1] |
| CEM2S22-C[0.1-4.5/0.1] |
| CEM2S25-C[0.1-5/0.1] |
| V-CEM2S3-C[0.1-0.7/0.1] |
| V-CEM2S4-C[0.1-1/0.1] |
| V-CEM2S5-C[0.1-1/0.1] |
| V-CEM2S6-C[0.1-1.2/0.1] |
| V-CEM2S7-C[0.1-1.4/0.1] |
| V-CEM2S8-C[0.1-1.4/0.1] |
| V-CEM2S9-C[0.1-2/0.1] |
| V-CEM2S10-C[0.1-3/0.1] |
| V-CEM2S11-C[0.1-3/0.1] |
| V-CEM2S12-C[0.1-3/0.1] |
| V-CEM2S13-C[0.1-3.5/0.1] |
| V-CEM2S14-C[0.1-3.5/0.1] |
| V-CEM2S15-C[0.1-4/0.1] |
| V-CEM2S16-C[0.1-4/0.1] |
| V-CEM2S18-C[0.1-4/0.1] |
| V-CEM2S20-C[0.1-4.5/0.1] |
| V-CEM2S22-C[0.1-4.5/0.1] |
| V-CEM2S25-C[0.1-5/0.1] |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Coating | Overall Length (L) (mm) | Corner (C) (mm) | Length Under Neck (θ) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 7 jours | 3 | 8 | 6 | Non revêtu | 50 | 0.1 ～ 0.7 | 15° | ||
- | 1 | 7 jours | 4 | 8 | 6 | Non revêtu | 60 | 0.1 ～ 1 | 15° | ||
- | 1 | 7 jours | 5 | 10 | 6 | Non revêtu | 60 | 0.1 ～ 1 | 15° | ||
- | 1 | 7 jours | 6 | 12 | 6 | Non revêtu | 60 | 0.1 ～ 1.2 | 15° | ||
- | 1 | 7 jours | 7 | 14 | 10 | Non revêtu | 60 | 0.1 ～ 1.4 | 15° | ||
- | 1 | 7 jours | 8 | 14 | 10 | Non revêtu | 60 | 0.1 ～ 1.4 | 15° | ||
- | 1 | 7 jours | 9 | 18 | 10 | Non revêtu | 70 | 0.1 ～ 2 | 15° | ||
- | 1 | 7 jours | 10 | 18 | 10 | Non revêtu | 70 | 0.1 ～ 3 | - | ||
- | 1 | 7 jours | 11 | 22 | 10 | Non revêtu | 80 | 0.1 ～ 3 | 15° | ||
- | 1 | 7 jours | 12 | 22 | 12 | Non revêtu | 80 | 0.1 ～ 3 | - | ||
- | 1 | 7 jours | 13 | 26 | 12 | Non revêtu | 85 | 0.1 ～ 3.5 | - | ||
- | 1 | 7 jours | 14 | 26 | 16 | Non revêtu | 90 | 0.1 ～ 3.5 | 15° | ||
- | 1 | 7 jours | 15 | 30 | 16 | Non revêtu | 95 | 0.1 ～ 4 | 15° | ||
- | 1 | 7 jours | 16 | 30 | 16 | Non revêtu | 95 | 0.1 ～ 4 | - | ||
- | 1 | 7 jours | 18 | 34 | 20 | Non revêtu | 95 | 0.1 ～ 4 | - | ||
- | 1 | 7 jours | 20 | 38 | 20 | Non revêtu | 110 | 0.1 ～ 4.5 | - | ||
- | 1 | 7 jours | 22 | 45 | 20 | Non revêtu | 110 | 0.1 ～ 4.5 | - | ||
- | 1 | 7 jours | 25 | 50 | 25 | Non revêtu | 120 | 0.1 ～ 5 | - | ||
- | 1 | 13 jours | 3 | 8 | 6 | TiCN | 50 | 0.1 ～ 0.7 | 15° | ||
- | 1 | 13 jours | 4 | 8 | 6 | TiCN | 60 | 0.1 ～ 1 | 15° | ||
- | 1 | 13 jours | 5 | 10 | 6 | TiCN | 60 | 0.1 ～ 1 | 15° | ||
- | 1 | 13 jours | 6 | 12 | 6 | TiCN | 60 | 0.1 ～ 1.2 | 15° | ||
- | 1 | 13 jours | 7 | 14 | 10 | TiCN | 60 | 0.1 ～ 1.4 | 15° | ||
- | 1 | 13 jours | 8 | 14 | 10 | TiCN | 60 | 0.1 ～ 1.4 | 15° | ||
- | 1 | 13 jours | 9 | 18 | 10 | TiCN | 70 | 0.1 ～ 2 | 15° | ||
- | 1 | 13 jours | 10 | 18 | 10 | TiCN | 70 | 0.1 ～ 3 | - | ||
- | 1 | 13 jours | 11 | 22 | 10 | TiCN | 80 | 0.1 ～ 3 | 15° | ||
- | 1 | 13 jours | 12 | 22 | 12 | TiCN | 80 | 0.1 ～ 3 | - | ||
- | 1 | 13 jours | 13 | 26 | 12 | TiCN | 85 | 0.1 ～ 3.5 | - | ||
- | 1 | 13 jours | 14 | 26 | 16 | TiCN | 90 | 0.1 ～ 3.5 | 15° | ||
- | 1 | 13 jours | 15 | 30 | 16 | TiCN | 95 | 0.1 ～ 4 | 15° | ||
- | 1 | 13 jours | 16 | 30 | 16 | TiCN | 95 | 0.1 ～ 4 | - | ||
- | 1 | 13 jours | 18 | 34 | 20 | TiCN | 95 | 0.1 ～ 4 | - | ||
- | 1 | 13 jours | 20 | 38 | 20 | TiCN | 110 | 0.1 ～ 4.5 | - | ||
- | 1 | 13 jours | 22 | 45 | 20 | TiCN | 110 | 0.1 ～ 4.5 | - | ||
- | 1 | 13 jours | 25 | 50 | 25 | TiCN | 120 | 0.1 ～ 5 | - |
Loading...
Spécifications
| Model Number | Corner C 0.1 mm Increment Designation |
Flute Length ℓ |
Under Neck Angle θ |
Overall Length L |
Shank Diameter d |
|
| Outer Diameter D |
||||||
CEM2S (Non-Coated Type) V-CEM2S (TiCN Coating Type) |
3 | 0.1 ~ 0.7 | 8 | 15° | 50 | 6 |
| 4 | 0.1 ~ 1.0 | 8 | 15° | 60 | 8 | |
| 5 | 0.1 ~ 1.0 | 10 | 15° | 60 | 8 | |
| 6 | 0.1 ~ 1.2 | 12 | 15° | 60 | 8 | |
| 7 | 0.1 ~ 1.4 | 14 | 15° | 60 | 10 | |
| 8 | 0.1 ~ 1.4 | 14 | 15° | 60 | 10 | |
| 9 | 0.1 ~ 2.0 | 18 | 15° | 70 | 10 | |
| 10 | 0.1 ~ 3.0 | 18 | — | 70 | 10 | |
| 11 | 0.1 ~ 3.0 | 22 | 15° | 80 | 12 | |
| 12 | 0.1 ~ 3.0 | 22 | — | 80 | 12 | |
| 13 | 0.1 ~ 3.5 | 26 | — | 85 | 12 | |
| 14 | 0.1 ~ 3.5 | 26 | 15° | 90 | 16 | |
| 15 | 0.1 ~ 4.0 | 30 | 15° | 95 | 16 | |
| 16 | 0.1 ~ 4.0 | 30 | — | 95 | 16 | |
| 18 | 0.1 ~ 4.0 | 34 | — | 95 | 16 | |
| 20 | 0.1 ~ 4.5 | 38 | — | 110 | 20 | |
| 22 | 0.1 ~ 4.5 | 45 | — | 110 | 20 | |
| 25 | 0.1 ~ 5.0 | 50 | — | 120 | 25 |
[ ! ]Since additional processing is given to EM2S, the flute length (ℓ) and total length (L) are somewhat shorter than the indicated dimensions.
For Cutting Conditions, Refer to >>Click here.
Informations de base
| Work Material | General Steel / Heat-Treated Steel / Fonte / Aluminium / Cuivre | Type of Flute | Carré | Number of Flutes(sheet) | 2 |
|---|---|---|---|---|---|
| Tool Material Type | Cobalt High-Speed Steel | Processing Applications | Flat Surface / Side Surface / Rainure | Torsion Angle (θ) | Standard Helix (30 to 40°) |
| Base-Blade Availability | Included | Tolerance(mm) | 0 ~ -0.03 |
Configurer
Propriétés de base
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Coating
- TiCN
- Non revêtu
-
Overall Length (L)(mm)
-
Corner (C)(mm)
-
Type
- CEM2S
- V-CEM2S
Filtrer par jours d'expédition standard
-
- Tous les articles
- 7 jours ou moins
- 13 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.