NIHON PISCO Ventouses（Méthode de montage：Type à insérer）

?* À propos du délai d'expédition et des prix

• 

  Tampon en caoutchouc, type standard avec ventouse à vide

  NIHON PISCO

  Thick and flat, ideal for general work
  
  [Features]
  · Deep type suitable for round fruits (apples, etc.) and balls, and the small type suitable for small works and for use at semiconductor manufacturing facilities.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Pad holders have been added for applications requiring "copper based metal not used" and "measures to reduce ozone concentration."
  · Copper-based metal not used for metal parts. HNBR is used for sealing rubber material.

  • Remise sur volume

  • Stock

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	2.79 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Pinces pneumatiques à ventouse à vide, modèle sans valve.

  NIHON PISCO

  Optimal for transporting small parts *CAD data for this series is being revised. Data will be available as soon as modifications are complete.
  
  [Features]
  · Air pin set with a vacuum pad and vacuum generator are built into the the pen-type main body.
  · Ideal for assembly of small components.
  · Valve built-in type: VTB saves energy due to low noise and air flows which occur only during usage

  • Remise sur volume

  • Stock

  Fichiers CAD 3D disponibles

  à partir de∗ ：	29.25 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Modèle d'accouplement à simple pression VPA, modèle standard avec ventouse à vide

  NIHON PISCO

  Ideal for thick and flat general work
  
  [Features]
  · Containers of various shapes are available, including a general type ideal for flat work (work that is hard and of a non-flimsy thickness), a deep type ideal for round fruit (apples, etc.) and balls, and a small type ideal for small work or for use in semiconductor manufacturing facilities.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Pad holders have been added for applications requiring "no use of copper-based metals" and "reduced ozone concentrations."
  · Copper-based metals are not used for metal parts. HNBR is used as the sealing rubber material.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	13.45 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Ventouse à vide standard VPE

  NIHON PISCO

  Thick and flat; ideal for general work
  
  [Features]
  · Containers of different shapes are available, including the general type suitable for flat work surfaces (ones that are rigid enough not to flap), the deep type suitable for round fruits (apples, etc.) and balls, and the small type suitable for small works and for use at semiconductor manufacturing facilities.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Pad holders have been added for applications requiring copper-based metal not to be used and as part of efforts to reduce ozone concentrations.
  · Copper-based metal is not used for metal parts. HNBR is used for sealing rubber material.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	14.30 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Modèle de ventouse à vide standard VPF

  NIHON PISCO

  Thick and flat construction is ideal for general work, *CAD data for this series is being revised. Data will be available as soon as modifications are complete.
  
  [Features]
  · Containers of different shapes are available, including a general type suitable for flat work (hard enough not to flap around), a deep type suitable for round fruits (apples, etc.) and balls, and a small type suitable for small work and for use in semiconductor manufacturing facilities.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Pad holders have been added for applications where "copper based metals cannot be used" or "a reduction in ozone concentration" is required.
  · Copper-based metal is not used for the metal parts. HNBR is used for the sealing rubber material

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	20.15 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Valve intégrée, pince à air avec ventouse à vide

  NIHON PISCO

  Optimal for transporting small parts * This series is undergoing CAD data revision. This will be available as soon as modifications are complete.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  à partir de∗ ：	39.54 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Raccords crantés VPC, modèle standard avec ventouse à vide

  NIHON PISCO

  Thick and flat construction is ideal for general work, *CAD data for this series is being revised. Data will be available as soon as modifications are complete.
  
  [Features]
  · Containers of different shapes are available, including a general type suitable for flat work (hard enough not to flap around), a deep type suitable for round fruits (apples, etc.) and balls, and a small type suitable for small work and for use in semiconductor manufacturing facilities.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Pad holders have been added for applications where "copper based metals cannot be used" or "a reduction in ozone concentration" is required.
  · Copper-based metal is not used for the metal parts. HNBR is used for the sealing rubber material

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	25.27 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Ventouse à vide, pincettes pneumatiques, modèle antistatique sans valve.

  NIHON PISCO

  *The CAD data for this series is being revised. It will be available as soon as modifications are complete.
  
  [Features]
  · The pen-type main unit features a vacuum pad and vacuum generator within .
  · Connect the tube (ø4 ㎜) and supply compressed air (0.5MPa). Then, a vacuum is formed via hole or button control, and the work piece is adhered.
  · Two types with different characteristics are available. The VTB type has a built-in valve that only lets air flow during use, keeping noise down and conserving energy. The VTA type has no valve, keeping it inexpensive.
  · An anti static type, ideal for assembly processes where the presence of static electricity is an issue, is also now available.
  • Two types of pad holder shape are also available.
  • In addition to the conventional R type, a straight type has also been added to the product line. Choose the one that fits the job.

  Fichiers CAD 3D disponibles

  à partir de∗ ：	38.47 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Ventouse à vide, pinces pneumatiques, modèle antistatique avec valve intégrée.

  NIHON PISCO

  The pen-type body includes a vacuum pad and a vacuum generator . * CAD data for this series is being revised It will be available as soon as the modifications are complete.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  à partir de∗ ：	50.13 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

Loading...