THK Vis à billes
| Nombre de jours d'expédition |
|
|---|
?* À propos du délai d'expédition et des prix
-
Écrous de vis à billes / écrou compact / diamètre 10 - 50 / Pas 4 - 16 / BTK
THK
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 182.78 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Vis à billes / bride compacte / diamètre 4 - 14 / pas 1 - 5 / C3, C5, C7 / MDK
THK
[Features]
· This product has no machining on the shaft ends, and is a standard series precision ball screw mass-produced at specified lengths.
· Additional work on screw shaft ends can be easily performed.- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 458.34 € Délai d'expédition minimum ： 23 jours *Prix unitaire/configuration de base
-
Écrous de vis à billes / écrou-bloc / diamètre 14 - 45 / Pas 4 - 12 / BNT
THK
[Features]
· THK rolling ball screws are low-priced sending screws that modify the screw grinding shaft used in precision ball screws and use a new screw shaft created by combining high accuracy rolling pressing with special surface grinding finishing.
· Because all the ball rolling surfaces or the combined ball screw nuts have undergone grinding finishing, the gap in the shaft direction is smaller than conventional rolling ball screws, providing smooth operation.
· Also, an abundant standardized lineup is available so you can select the product that's optimal for your application.- Remise sur volume
- Stock
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 227.85 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Vis à billes / diamètre 10 - 50 / Pas 4 - 100 / A, C7, C8, C10 / TS
THK
[Features]
· Aside from the C10 class, the shaft tips for the C7 and C8 classes are both standardized for movement amount tolerance, so they can be used for a wide variety of applications.à partir de∗ ： 113.54 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Vis à billes / bride ronde / diamètre 16 - 25 / pas 5 - 12 / C5, C7 / BIF
THK
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 1,051.28 € Délai d'expédition minimum ： 23 jours *Prix unitaire/configuration de base
-
Écrous de vis à billes / écrou compact / BLK
THK
[Features]
· Uses an end cap method for high speed rotation, providing stable operation.- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 375.55 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Vis à billes / bride ronde / diamètre 16 - 25 / pas 5 - 12 / C5, C7 / BNF
THK
[Features]
· This product has no machining on the shaft ends, and is a standard series precision ball screw mass-produced at specified lengths.
· Additional work on screw shaft ends can be easily performed.
· Also, a variety of nut shapes are available to suit different purposes such as the BNFN shape double nut, BNF shape single nut, BIF shape offset preload nut, MDK shape miniature ball screw, and MBF shape.
· Dust-proof: The following model number nuts have labyrinth seals mounted.- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 911.11 € Délai d'expédition minimum ： 23 jours *Prix unitaire/configuration de base
-
Vis à billes / bride compacte / diamètre 4 - 14 / Pas 1, 2, 4 / C3, C5, C7 / MBF
THK
[Features]
· This product has no machining on the shaft ends, and is a standard series precision ball screw mass-produced at specified lengths.
· Additional work on screw shaft ends can be easily performed.
· Also, a variety of nut shapes are available to suit different purposes such as the BNFN shape double nut, BNF shape single nut, BIF shape offset preload nut, MDK shape miniature ball screw, and MBF shape.
· Dust-proof: The following model number nuts have labyrinth seals mounted.- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 776.44 € Délai d'expédition minimum ： 23 jours *Prix unitaire/configuration de base
-
Écrous de vis à billes / Écrou rond / CNF
THK
A no preloading type rolling ball screw with a single unit CNF shape nut.
[Features]
· Due to the large lead, this unit can be combined with long nuts in four types of load conditions, and has a long life.- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 538.30 € Délai d'expédition minimum ： 20 jours *Prix unitaire/configuration de base
-
Vis à billes / bride rectangulaire / diamètre 16 / pas 16 / C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
· An appropriate amount of grease is enclosed with ball screw nuts.
· Also, for ball screw nuts larger than the BNK0802 shape model, a labyrinth seal is built-in (BNK1510 shape, BNK1520 shape, BNK1616 shape, BNK2020 shape, and BNK2520 shape use a combination end cap).
· In addition, for cases where contaminants are a concern, dust-proof equipment (bellows, etc.) must always be used to completely cover screw shafts.
· BNK A ball screw with shape standardization to screw shaft diameter ø4 - 25 mm and lead 1 - 20 mm.- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 1,121.85 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Vis à billes / bride rectangulaire / diamètre 4 / pas 1 / C3, C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 631.09 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
- En promotion
Vis à billes / bride rectangulaire / diamètre 8 / pas 2 / C3, C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 564.37 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Vis à billes / bride rectangulaire / diamètre 12 / pas 5 / C3, C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
· An appropriate amount of grease is enclosed with ball screw nuts.
· Also, for ball screw nuts larger than the BNK0802 shape model, a labyrinth seal is built-in (BNK1510 shape, BNK1520 shape, BNK1616 shape, BNK2020 shape, and BNK2520 shape use a combination end cap).
· In addition, for cases where contaminants are a concern, dust-proof equipment (bellows, etc.) must always be used to completely cover the screw shafts.
· BNK Type: Dimensions Table—A15-116 Standardized ball screw with a screw shaft diameter of 4 to 25 mm, and lead of 1 to 20 mm.- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 602.00 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Support d'écrou pour vis à billes / pour vis BNK / acier / , aluminium / revêtement au choix / MC
THK
- Remise sur volume
- Fichiers CAD 2D disponibles
à partir de∗ ： 114.60 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Vis à billes / bride rectangulaire / diamètre 6 / pas 1 / C3, C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 644.77 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Vis à billes / bride rectangulaire / diamètre 8 / pas 1 / C3, C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
[Dust-proofing and lubrication.]
· An appropriate amount of grease is enclosed with ball screw nuts.
· Also, for ball screw nuts larger than the BNK0802 shape model, a labyrinth seal is built-in (BNK1510 shape, BNK1520 shape, BNK1616 shape, BNK2020 shape, and BNK2520 shape use a combination end cap).
· In addition, for cases where contaminants are a concern, dust-proof equipment (bellows, etc.) must always be used to completely cover screw shafts.- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 646.49 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Écrous de vis à billes / écrou compact / WTF
THK
[Features]
· THK rolling ball screws are low-priced sending screws that modify the screw grinding shaft used in precision ball screws and use a new screw shaft created by combining high accuracy rolling pressing with special surface grinding finishing.
· Because all the ball rolling surfaces or the combined ball screw nuts have undergone grinding finishing, the gap in the shaft direction is smaller than conventional rolling ball screws, providing smooth operation.
· Also, an abundant standardized lineup is available so you can select the product that's optimal for your application.
· Aside from the C10 class, the shaft tips for the C7 and C8 classes are both standardized for movement amount tolerance, so they can be used for a wide variety of applications.
· After rolling is completed, the ball rolling surface of the screw shaft undergoes a special surface polishing process, finishing the surface at a roughness of 0.20a or less, identical to the precision ball screw product line after screw grinding.
· Rotating ball screw nuts also undergo a ball rolling surface grinding and finishing process just like precision ball screws, which provides durability and smooth operation.
· After rolling is completed, the screw shaft is treated with either high frequency or charcoal immersion quenching, followed by a special surface grinding and finishing process. Due to the manufacturing methods used, this product is comparatively cheaper than the precision ball screw line made through grinding.
· Because the ball screw nut has either a compact labyrinth seal or a brush seal built-in, it operates with low friction and high level dust-proofing, lengthening the life of ball screws.- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 410.61 € Délai d'expédition minimum ： 20 jours *Prix unitaire/configuration de base
-
Vis à billes / bride compacte / diamètre 10 / Pas 10 / C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 1,038.07 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Vis à billes / bride rectangulaire / diamètre 10 / Pas 2 / C3, C5, C7 / Précontrainte, jeu / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 612.25 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Vis à billes / bride rectangulaire / diamètre 10 / Pas 2 / C3, C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 665.29 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Vis à billes / bride rectangulaire / diamètre 14 / pas 2 / C3, C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
· An appropriate amount of grease is enclosed with ball screw nuts.
· Also, for ball screw nuts larger than the BNK0802 shape model, a labyrinth seal is built-in (BNK1510 shape, BNK1520 shape, BNK1616 shape, BNK2020 shape, and BNK2520 shape use a combination end cap).
· In addition, for cases where contaminants are a concern, dust-proof equipment (bellows, etc.) must always be used to completely cover screw shafts.- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 518.20 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Vis à billes / bride rectangulaire / diamètre 15 / pas 10 / C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 819.19 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Vis à billes / bride rectangulaire / diamètre 15 / pas 20 / C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 991.90 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Vis à billes / bride rectangulaire / diamètre 20 / pas 10 / C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 902.97 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Vis à billes / bride rectangulaire / diamètre 20 / pas 20 / C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 1,267.25 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Vis à billes / bride rectangulaire / diamètre 12 / pas 2 / C3, C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 622.50 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Vis à billes / bride rectangulaire / diamètre 14 / pas 4 / C3, C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 518.20 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Vis à billes / bride rectangulaire / diamètre 14 / pas 8 / C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401, 0501, or 0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 990.20 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Vis à billes / bride rectangulaire / diamètre 25 / pas 20 / C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401, 0501, or 0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 1,460.49 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Vis à billes / bride rectangulaire / diamètre 8 / pas 10 / C5, C7 / BNK
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· This rotary ball screw is a rotary ball screw unit with a unified structure made up of a ball screw nut and a support bearing.
· The support bearing is a large angular bearing with a contact angle of 60° that provides rigidity in the axial direction where more balls are placed.
· The BLR type is available in precision ball screw and rolled ball screw specifications.
· Smooth operation: provides smooth operation in comparison to the straight line movement of rack and pinion systems.
· Also, because the screw shaft does not rotate with ball screw nut drive, there is no jumping rope phenomenon, operation is quiet, and heat produced by the unit is reduced.- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 736.07 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
| Marque |
|---|
| Série du produit |
| CAD |
| à partir de∗ |
| Délai d'expédition minimum ： |
| Spécifications |
| Catégorie du produit |
| Forme de la bride |
| Niveau de précision |
| D.E. de l'arbre de vis d(φ) |
| Vis-mère(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Marque | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK |
| Série du produit | Écrous de vis à billes / écrou compact / diamètre 10 - 50 / Pas 4 - 16 / BTK | Vis à billes / bride compacte / diamètre 4 - 14 / pas 1 - 5 / C3, C5, C7 / MDK | Écrous de vis à billes / écrou-bloc / diamètre 14 - 45 / Pas 4 - 12 / BNT | Vis à billes / diamètre 10 - 50 / Pas 4 - 100 / A, C7, C8, C10 / TS | Vis à billes / bride ronde / diamètre 16 - 25 / pas 5 - 12 / C5, C7 / BIF | Vis à billes / bride ronde / diamètre 16 - 25 / pas 5 - 12 / C5, C7 / BNF | Vis à billes / bride compacte / diamètre 4 - 14 / Pas 1, 2, 4 / C3, C5, C7 / MBF | Vis à billes / bride rectangulaire / diamètre 16 / pas 16 / C5, C7 / BNK | Vis à billes / bride rectangulaire / diamètre 4 / pas 1 / C3, C5, C7 / BNK | Vis à billes / bride rectangulaire / diamètre 8 / pas 2 / C3, C5, C7 / BNK | Vis à billes / bride rectangulaire / diamètre 12 / pas 5 / C3, C5, C7 / BNK | Support d'écrou pour vis à billes / pour vis BNK / acier / , aluminium / revêtement au choix / MC | Vis à billes / bride rectangulaire / diamètre 6 / pas 1 / C3, C5, C7 / BNK | Vis à billes / bride rectangulaire / diamètre 8 / pas 1 / C3, C5, C7 / BNK | Vis à billes / bride compacte / diamètre 10 / Pas 10 / C5, C7 / BNK | Vis à billes / bride rectangulaire / diamètre 10 / Pas 2 / C3, C5, C7 / Précontrainte, jeu / BNK | Vis à billes / bride rectangulaire / diamètre 10 / Pas 2 / C3, C5, C7 / BNK | Vis à billes / bride rectangulaire / diamètre 14 / pas 2 / C3, C5, C7 / BNK | Vis à billes / bride rectangulaire / diamètre 15 / pas 10 / C5, C7 / BNK | Vis à billes / bride rectangulaire / diamètre 15 / pas 20 / C5, C7 / BNK | Vis à billes / bride rectangulaire / diamètre 20 / pas 10 / C5, C7 / BNK | Vis à billes / bride rectangulaire / diamètre 20 / pas 20 / C5, C7 / BNK | Vis à billes / bride rectangulaire / diamètre 12 / pas 2 / C3, C5, C7 / BNK | Vis à billes / bride rectangulaire / diamètre 14 / pas 4 / C3, C5, C7 / BNK | Vis à billes / bride rectangulaire / diamètre 14 / pas 8 / C5, C7 / BNK | Vis à billes / bride rectangulaire / diamètre 25 / pas 20 / C5, C7 / BNK | Vis à billes / bride rectangulaire / diamètre 8 / pas 10 / C5, C7 / BNK | |||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| à partir de∗ | 182.78 € *Prix unitaire/configuration de base | 458.34 € *Prix unitaire/configuration de base | 227.85 € *Prix unitaire/configuration de base Remise sur volume | 113.54 € *Prix unitaire/configuration de base | 1,051.28 € *Prix unitaire/configuration de base | 375.55 € *Prix unitaire/configuration de base | 911.11 € *Prix unitaire/configuration de base | 776.44 € *Prix unitaire/configuration de base | 538.30 € *Prix unitaire/configuration de base | 1,121.85 € *Prix unitaire/configuration de base | 631.09 € *Prix unitaire/configuration de base | 564.37 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 602.00 € *Prix unitaire/configuration de base | 114.60 € *Prix unitaire/configuration de base Remise sur volume | 644.77 € *Prix unitaire/configuration de base | 646.49 € *Prix unitaire/configuration de base | 410.61 € *Prix unitaire/configuration de base | 1,038.07 € *Prix unitaire/configuration de base | 612.25 € *Prix unitaire/configuration de base | 665.29 € *Prix unitaire/configuration de base | 518.20 € *Prix unitaire/configuration de base | 819.19 € *Prix unitaire/configuration de base | 991.90 € *Prix unitaire/configuration de base | 902.97 € *Prix unitaire/configuration de base | 1,267.25 € *Prix unitaire/configuration de base | 622.50 € *Prix unitaire/configuration de base | 518.20 € *Prix unitaire/configuration de base | 990.20 € *Prix unitaire/configuration de base | 1,460.49 € *Prix unitaire/configuration de base | 736.07 € *Prix unitaire/configuration de base |
| Délai d'expédition minimum ： | 6 jours | 23 jours | 6 jours | 6 jours | 23 jours | 6 jours | 23 jours | 23 jours | 20 jours | 6 jours | 6 jours | Jour même | 6 jours | 5 jours | 6 jours | 6 jours | 20 jours | 6 jours | 6 jours | 6 jours | 6 jours | 6 jours | 6 jours | 6 jours | 6 jours | 6 jours | 6 jours | 6 jours | 6 jours | 6 jours |
| Spécifications |
| |||||||||||||||||||||||||||||
| Catégorie du produit | Vis à billes roulée | Vis à billes de précision | Vis à billes roulée | Vis à billes roulée | Vis à billes de précision | Vis à billes roulée | Vis à billes de précision | Vis à billes de précision | Vis à billes roulée | Vis à billes de précision | Vis à billes de précision | Vis à billes de précision | Vis à billes de précision | Pièce associée aux vis à billes | Vis à billes de précision | Vis à billes de précision | Vis à billes roulée | Vis à billes de précision | Vis à billes de précision | Vis à billes de précision | Vis à billes de précision | Vis à billes de précision | Vis à billes de précision | Vis à billes de précision | Vis à billes de précision | Vis à billes de précision | Vis à billes de précision | Vis à billes de précision | Vis à billes de précision | Vis à billes de précision |
| Forme de la bride | Forme ronde, 2 méplats pour vis de serrage | Miniature | Bloc | - | Forme ronde | Forme ronde, 2 méplats pour vis de serrage | Forme ronde | Forme ronde, 2 méplats pour vis de serrage | Forme ronde | Rectangulaire | Forme ronde, 2 méplats pour vis de serrage | Forme ronde, 2 méplats pour vis de serrage | Rectangulaire | - | Forme ronde, 2 méplats pour vis de serrage | Forme ronde, 2 méplats pour vis de serrage | Forme ronde, 2 méplats pour vis de serrage | Rectangulaire | Forme ronde, 2 méplats pour vis de serrage | Rectangulaire | Forme ronde, 2 méplats pour vis de serrage | Rectangulaire | Rectangulaire | Rectangulaire | Rectangulaire | Forme ronde, 2 méplats pour vis de serrage | Forme ronde, 2 méplats pour vis de serrage | Rectangulaire | Rectangulaire | Forme ronde, 2 méplats pour vis de serrage |
| Niveau de précision | - | C3 / C5 / C7 | - | - | C5 | - | C5 | C5 | - | C5 | C3 / C5 / C7 | C3 / C5 / C7 | C3 / C7 | - | C3 / C5 / C7 | C3 / C5 / C7 | - | C5 / C7 | C3 / C5 / C7 | C3 / C5 | C3 / C5 / C7 | C5 / C7 | C5 | C5 / C7 | C5 | C3 / C5 / C7 | C3 / C5 / C7 | C5 | C5 / C7 | C5 / C7 |
| D.E. de l'arbre de vis d(φ) | 10 ～ 50 | 4 ～ 14 | 14 ～ 45 | 14 ～ 32 | 16 ～ 40 | 15 ～ 50 | 16 ～ 50 | 6 ～ 14 | 15 ～ 30 | 16 | 4 | 8 | 12 | - | 6 | 8 | 15 ～ 50 | 10 | 10 | 10 | 14 | 15 | 15 | 20 | 20 | 12 | 14 | 14 | 25 | 8 |
| Vis-mère(mm) | 4 ～ 16 | 1 ～ 5 | 4 ～ 12 | 4 ～ 25 | 5 ～ 10 | 10 ～ 50 | 5 ～ 10 | 1 ～ 2 | 30 ～ 60 | 16 | 1 | 2 | 5 | - | 1 | 1 | 20 ～ 100 | 10 | 2 | 4 | 2 | 10 | 20 | 10 | 20 | 2 | 4 | 8 | 20 | 10 |
Loading...
Filtrer par:
Stock
-
- Stock Items Included
Affiner la recherche en précisant les spéc./dim.
-
Catégorie du produit
-
Forme de la bride
-
Niveau de précision
-
D.E. de l'arbre de vis d(φ)
-
Vis-mère(mm)
Affiner la recherche en spécifiant le fabricant
Affiner la recherche en précisant le type de données CAO
-
- 2D
- 3D
Catégories relatives à « Vis à billes »
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.