Joints rotatifs/à rotule（Nominal Connection Screw Supply Side (Single unit, swivel)：3/8B）

?* À propos du délai d'expédition et des prix

• 

  Raccord à réfraction de pression, joint à rotule nacré, série B

  SHOWA GIKEN INDUSTRIAL

  B series is a swivel joint for which the main unit can be used with a 360 degree rotation that can be used as a steel (welded) screw-in type movable pipe line.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	194.81 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Raccord à réfraction de pression, joint à rotule nacré, série A

  SHOWA GIKEN INDUSTRIAL

  The A series of swivel joints are capable of 360-degree rotation. They can be used with ductile cast-iron (partial carbon steel) screw-in movable pipelines.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	125.76 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Raccord à réfraction de pression, joint à rotule nacré, série AS

  SHOWA GIKEN INDUSTRIAL

  The AS Series swivel joint main units can be used rotated 360 degrees. These fittings can be used as stainless steel screw-in type joints in movable pipe lines. .
  
  [Features]
  · The pearl swivel joint can be used rotated 360 degrees. Double row ball bearings are incorporated into the bearings. These bearings are grease-lubricated. Therefore, the bearing has a high mechanical strength that can withstand large radial thrust and moment loads.
  · A ring-shaped packing (other than an O-ring) is used in the seals. This provides a stable, simple-structured seal with no leakage of the internal pressurized fluid.
  · The PK type use high temperature-resistant PTFE materials on the seal rings. Therefore, this type does not require any lubricating.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	175.09 €
  	Prix spécial
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Raccord à réfraction de pression, joint à rotule nacré, série SRK

  SHOWA GIKEN INDUSTRIAL

  The SRK series of swivel joints are capable of 360-degree rotation. They can be used with steel (welded) screw-in movable pipelines.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	340.15 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Raccord à réfraction de pression, joint à rotule nacré, série SSH (en SUS)

  SHOWA GIKEN INDUSTRIAL

  SSH series (SUS) is a swivel joint for which the main unit can be used with a 360 degree rotation that can be used as a movable pipe line.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	633.17 €
  Délai d'expédition minimum ：	24 jours

  *Prix unitaire/configuration de base

• 

  Joint rotatif de pression, joint rotatif nacré ACL (type à vis, rotation en sens unique)

  SHOWA GIKEN INDUSTRIAL

  ACL (Single, screwed type) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	215.98 €
  Délai d'expédition minimum ：	23 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Joint rotatif de pression, joint rotatif nacré KCL (type à vis, rotation en sens unique)

  SHOWA GIKEN INDUSTRIAL

  KCL (Single, screwed type) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	117.72 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Joint rotatif de pression, joint rotatif nacré SKCL (type à vis, rotation en sens unique)

  SHOWA GIKEN INDUSTRIAL

  SKCL (Single, screwed type) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	162.10 €
  Délai d'expédition minimum ：	12 jours

  *Prix unitaire/configuration de base

• 

  Joint rotatif de pression, joint rotatif nacré RXE1000 (type à vis, rotation en sens unique)

  SHOWA GIKEN INDUSTRIAL

  RXE1000 (Singe, screwed type) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	132.96 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Joint rotatif de pression, joint rotatif nacré RXH1000 (type à vis, rotation en sens unique)

  SHOWA GIKEN INDUSTRIAL

  RXH1000 (Singe, screwed type) is a rotary joint for supplying the medium to rotary equipment in a stable manner.
  
  [Features]
  ・The pearl rotary joint RX series features excellent durability and very high performance and two types are available: the RXE and RXH, each designed for different conditions of use.
  A fine ceramic and carefully selected carbon seal ring are incorporated as a sealing material in this instrument, and thus high speed rotation and low torque are achieved along with ultra-precise lapping within two light bands of the sealing surface. Tracking of a high speed floating ring is achieved by adopting a floating seal ring with a detent key groove, and long-term seal stability is achieved.
  · Main Body

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	160.67 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Joint rotatif de pression, joint rotatif nacré RXE1300 (type à vis, rotation en sens unique)

  SHOWA GIKEN INDUSTRIAL

  RXE1300 (Singe, screwed type) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	157.38 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Joint rotatif de pression, joint rotatif nacré RXE1000SUS (type à vis, rotation en sens unique)

  SHOWA GIKEN INDUSTRIAL

  RXE1000SUS (Singe, screwed type) is a rotary joint designed to stably supply a medium to rotary equipment.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	345.47 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Joint rotatif de pression, joint rotatif nacré, série SXO, type droit

  SHOWA GIKEN INDUSTRIAL

  SXO series (Straight type) is a rotary joint for supplying the medium to rotary equipment in a stable manner.
  
  [Features]
  · Lightweight and compact for easy handling.
  · Simple sealing structure for easy maintenance.
  · Superior sealing performance achieved via ultra-precise finish.
  · Supports high pressure and high speed applications.
  · Use of a high grade seal (TCC) is also supported for a higher load specification

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	233.02 €
  Délai d'expédition minimum ：	14 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Joints à rotules, série JL-DC

  BRIDGESTONE

  For use in piping for civil engineering and construction machinery, manufacturing machinery, and general hydraulic machinery using mineral hydraulic oil.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	80.04 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Joint à rotule, série JL-GC

  BRIDGESTONE

  For use in piping for civil engineering and construction machinery, manufacturing machinery, and general hydraulic machinery using mineral hydraulic oil.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	92.93 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Joint à rotule, série JL-KC

  BRIDGESTONE

  For use in piping in civil engineering and construction machinery, manufacturing machinery, and general hydraulic machinery that use mineral hydraulic oil as fluid

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	75.56 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Joint à rotule, série JL-CC

  BRIDGESTONE

  For use in piping in civil engineering and construction machinery, manufacturing machinery, and general hydraulic machinery that use mineral hydraulic oil as fluid

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	92.93 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Joints à rotules, série JL-CG

  BRIDGESTONE

  For use in piping in civil engineering and construction machinery, manufacturing machinery, and general hydraulic machinery that use mineral hydraulic oil as a fluid

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	95.10 €
  Délai d'expédition minimum ：	45 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Joint rotatif, série JR-DC

  BRIDGESTONE

  For use in piping in civil engineering and construction machinery, manufacturing machinery, and general hydraulic machinery that use mineral hydraulic oil as fluid

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	222.15 €
  	Prix spécial
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Joint à rotule, SJH

  IHARA SCIENCE

  Swivel joint for general hydraulic pressure. Effective anti-torsion measure for hydraulic hoses that offers improved durability.
  
  [Features]
  · Used for pressure piping, this is a joint that allows slow rotation or oscillation (reciprocating rotary motion) and is used mainly for connecting a fixed pipe to a high-pressure hose. It is useful for preventing unreasonable hose attachment and twisting.
  · In order to handle extreme applications, the rotor outer surface (the rotation sliding part) is treated with surface hardener, and a slipper seal with extremely low wear is used in order to suppress co-rotation of the O-ring and to prevent wear.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	156.04 €
  Délai d'expédition minimum ：	23 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Joints à rotules, type SJM

  IHARA SCIENCE

  [Features]
  · Swivel joint for general hydraulics. Effective anti-torsion measure for hydraulic hoses that offers improved durability.
  · The shape of the connection portion can be supported more easily than the shape of the equipment and the hose.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	96.78 €
  	Prix spécial
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Joint à rotule, type SJS

  IHARA SCIENCE

  Swivel joint for general hydraulic pressure. Effective anti-torsion measure for hydraulic hoses that offers improved durability.
  
  [Features]
  · Used for pressure piping, this is a joint that allows slow rotation or oscillation (reciprocating rotary motion) and is used mainly for connecting a fixed pipe to a high-pressure hose. It is useful for preventing unreasonable hose attachment and twisting.
  · SJS type.
  · A product with a simple structure intended for general use.
  · SJH type.
  · The rotor peripheral surface, which is a rotating and sliding part, has been surface hardened in order to withstand harsh use, and a slipper seal with a very low degree of wear is used to suppress the drag of the O-ring and thus prevent wear.
  · SJM type.
  A product that is a straight swivel joint that rotates easily due to the placement of a steel ball in a sliding part.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	73.31 €
  	Prix spécial
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Joint rotatif de pression, joint rotatif nacré, série SXO, type 90°

  SHOWA GIKEN INDUSTRIAL

  The SXO series 90° type is a rotary joint for stable supply of medium to rotating equipment.
  
  [Features]
  · Lightweight, compact, and easy to handle.
  · Easy to maintain simple seal structure.
  · Ultra-high precision finish delivers incredible sealability.
  · It supports high pressure and high speed use.
  · Use of a high grade seal (TCC) with a higher load specification is also possible

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	233.02 €
  Délai d'expédition minimum ：	14 jours

  *Prix unitaire/configuration de base

Loading...