Flexibles en résine（Page 2）

?* À propos du délai d'expédition et des prix

• 

  Flexible tressé général Kana Line N.S.

  KANAFLEX CORPORATION

  Made from environmentally friendly non-PVC material. Lightweight and good workability. Achieved same or better bending than that made of PVC. Main body is transparent so it is easy to observe the items being transported.
  
  [Features]
  · Made from environmentally friendly non-PVC material.
  · Can be burnt, does not generate toxic gases such as dioxins, chlorine gas, or sulfur oxides.
  · Lightweight and has good workability.
  · Average weight reduction of 30% compared to VS Kanaflex line.
  · Equal or better bending than PVC.
  · The main body is transparent so the item being transported can be easily viewed.
  · Achieved a permissible pressure of 0.49 MPa (5 kgf/cm2) through utilizing a reinforcement cord.
  · Can be used for both delivery and suction.
  · Low extension of the hose under pressure.

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	9 jours

• 

  Flexible tressé général, modèle V.S.-A

  KANAFLEX CORPORATION

  [Features]
  · Extremely flexible due to its corrugated outer surface (with smooth internal surface).
  · Full transparency allows for easy checking of the internal fluids.

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	36 jours

• 

  Flexible tressé général, modèle V.S.-CL

  KANAFLEX CORPORATION

  Mass reduced by 5% - 15% compared with V.S.-C3. Both the internal and outer surfaces are smooth, making carrying and transport easy.

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	9 jours

• 

  Flexible tressé général, modèle V.S.-A2

  KANAFLEX CORPORATION

  Compact and lightweight V.S.-A type. Highly flexible.

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	9 jours

• 

  Flexible résistance à l'abrasion New, résistance à la chaleur, flexible résistance à l'abrasion

  KANAFLEX CORPORATION

  A hose with superior abrasion resistance. Heat-resistant and capable of enduring blasts of heat up to 100°C. Uses conductive materials and steel wires for a grounding effect, providing an even higher level of safety.

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	8 jours

• 

  Flexible léger

  KANAFLEX CORPORATION

  [Features]
  · A light pipe that can be used for a variety of applications

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	218.37 €
  Délai d'expédition minimum ：	64 jours

  *Prix unitaire/configuration de base

• 

  TAC ECO SD-AS

  TOTAKU INDUSTRIES

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	10 jours

• 

  Gamme TAC Eco

  TOTAKU INDUSTRIES

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	11 jours

• 

  Flexible Line Ace

  TOTAKU INDUSTRIES

  SD hose pressure-resistant type. This has a reinforcing cord, and has a maximum allowed pressure of 0.5 MPA.
  
  [Features]
  ・SD hose pressure-resistant type.
  ▪ With a reinforced cord, it has a pressure-resistant function with a maximum allowable pressure of 0.50 Mpa {5.1 kgf/f}.

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	11 jours

• 

  TAC SD-A

  TOTAKU INDUSTRIES

  [Features]
  · Extremely flexible due to its corrugated outer surface (with smooth internal surface).
  · Full transparency allows for easy checking of the internal fluids.
  · This product has shared suction and delivery and is especially optimal for suction use.
  · For use in water supply and drain hoses on construction sites, irrigation, and industry.

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	11 jours

• 

  TAC SD-A2

  TOTAKU INDUSTRIES

  TAC SD-A lightweight type. A hose with improved flexibility.
  
  [Features]
  · A TACSD-A lightweight type.
  · Flexibility is improved due to the TACSD-A

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	11 jours

• 

  TAC SD-C

  TOTAKU INDUSTRIES

  [Features]
  · Inner and outer surfaces are smooth.
  · Has better pressure resistance than the TAC SD-A.
  · Because the soft portion is transparent, it is possible to check the contents that are being transported.

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	11 jours

• 

  TAC SD-C3

  TOTAKU INDUSTRIES

  TAC SD-C lightweight type.
  
  [Features]
  · Lightweight version of the TAC SD-C.
  · Suitable for both suction and delivery-4, but the product is particularly well-suited for delivery.
  · For supplying or draining water for agriculture, industry, and civil engineering construction

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	11 jours

• 

  Terre TAC SD-C

  TOTAKU INDUSTRIES

  [Features]
  · Grounding wire (copper) included, with excellent antistatic effect.
  Transparency enables checks of transported items.

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	11 jours

• 

  TAC SD-AS

  TOTAKU INDUSTRIES

  [Features]
  · Sustained anti-static effect due to the use of special blended soft resin.
  · Transparency (clear green color) makes it easy to observe what is passing through the tube.

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	11 jours

• 

  Résistant à l'huile TAC SD-C

  TOTAKU INDUSTRIES

  An oil-resistant hose for all resin types. Design incorporates special oil-resistant compounded resin for transporting oils.

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	11 jours

• 

  Tac Heran

  TOTAKU INDUSTRIES

  Uses abrasion resistant rubber for three times the abrasion resistance of TAC SD-A. Conductive for anti-static effects.

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	11 jours

• 

  Nouveau TAC Helan résistant à la chaleur

  TOTAKU INDUSTRIES

  [Features]
  ∙ Heat resistant specifications to resist 100℃ hot air (straight pipes that are designed to withstand 120℃ hot air).
  ∙ In addition to the conductive rubber, we use steel wire for grounding, which considerably improves safety.
  ∙ Compared to TAC helang, ozone degradation is less likely to happen to this hose.
  ∙ Product has superior weather resistance properties

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	11 jours

• 

  Flexible torsadé

  CHIYODA TSUSHO

  Excellent attaching properties for fittings due to nylon or urethane single layer tubing.
  
  [Features]
  · Extremely soft compared to urethane or nylon single layer tubing and easily connected to hose fittings.
  · Suitable for air piping inside factories

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	42.42 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Jeu de raccords de flexible torsadé

  CHIYODA TSUSHO

  [Features]
  · Equipped with a simple convenient coupling, so it is immediately usable after purchase.
  · Two types are available, a common use type (CHS), and a high-capacity type with a safety lock feature (MFX).

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	49.08 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Flexible MEGA

  CHIYODA TSUSHO

  Hose with approximately an approximately 20% larger inner diameter than a Chiyoda Tsusho hose with the same outer diameter.
  
  [Features]
  · Over 30% thinner compared to a urethane blade with the same inner diameter, and lightweight and soft.
  · An approximately 20% increase in the inner diameter (this company's ratio) compared to a hose with the same outer diameter is optimal for energy conserving piping.
  · Safe, high bursting pressure which is approximately double (this company's ratio) that of a urethane hose with the same inner diameter.
  · Has excellent oil resistance, and is suitable for air piping in a plant.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	99.47 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Flexible de conduite DH

  CHIYODA TSUSHO

  Soft hose with surface gathers applied.
  
  [Features]
  · Extremely soft braided hose.
  · Soft and with excellent workability.
  · Surface gathers.
  · The surface of the hose is made slippery by application of gathers, preventing damage to the coating and clinging of the hose

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	47.91 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Flexible torsadé résistant aux éclaboussures (GH)

  CHIYODA TSUSHO

  A blade hose that is flame retardant and lightweight.
  
  [Features]
  · Excellent flame retardant resistance to sparks: A fire-retarding material is used for the outer skin for reducing perforation caused by sputtering and swarf.
  · Lightweight: Approximately 1/3 lighter than conventional rubber hoses.
  · Simple connection: Simple for anyone to connect.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	54.50 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Flexible en résine fluorée ultra-souple, type tuyau

  HAKKO

  The inner layer is made of ETFE — highly chemical resistant. It is also flexible and pliable similar to urethane tubing.

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	9 jours

• 

  Flexible souple en résine fluorée (type tuyau)

  HAKKO

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	9 jours

• 

  Flexible en résine fluorée super souple (type à filetage de renfort)

  HAKKO

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	9 jours

• 

  Flexible souple en résine fluorée (type renforcé)

  HAKKO

  Thanks to its internal PVDF layer , this product has excellent chemical resistance and is reinforced for stronger pressure resistance.

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	9 jours

• 

  Ressort en résine fluorée super souple

  HAKKO

  Thanks to its internal layer ETFE, this product has outstanding chemical resistance is difficult to crush, and is suitable for vacuums.

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	8 jours

• 

  Pressure Hose

  HAKKO

  General-purpose pressure resistant transparent flexible PVC hose. Specifications up to 25 mm have a maximum pressure of 1.0 MPa.

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	8 jours

• 

  Oil-Resistant Pressure Hose

  HAKKO

  Pressure resistant oil resistant flexible PVC hose. Specifications up to 25 mm have a maximum pressure of 1.0 MPa.

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	8 jours

• 

  Flexible à ressort

  HAKKO

  General-purpose transparent flexible PVC hose. Vacuum (suction) specifications from 15 - 50 mm.

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	9 jours

• 

  KY Sun Foods

  HAKKO

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	9 jours

• 

  SUNFOODS, Inc.

  HAKKO

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	9 jours

• 

  New Flex

  HAKKO

  A classic urethane air hose.
  
  [Features]
  · Standard specifications for a lightweight pressure-resistant air hose.
  · Product is made of polyurethane, which has superior low temperature resistance properties, and maintains flexibility even during the winter.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	40.91 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Flexible pour solvant

  HAKKO

  These are hoses for paints and painting with inner layer nylon and conductive lining.
  
  [Features]
  ・Even if the grounding wire is not taken out, grounding can be taken with the conductive line layers, which allows for expeditious completion of fittings attachment work.
  ・As the grounding wire (metallic fiber) is built into the hose, the charge can be removed by connecting it securely to the ground.
  ・As the grounding wire is metallic fiber, it has superior flexibility compared to metallic wires such as copper wires.

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	9 jours

• 

  New Flex, à simple pression, produit d'ensemble

  HAKKO

  Single touch joint set for urethane foam air hose.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	129.49 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Flexible cristal, modèle F-3

  TIGERS POLYMER

  Lightweight, with flat and smooth inner/outer surfaces. Suitable for both delivery and suction.
  
  [Features]
  - The soft part is transparent, letting you see the contents.
  - Lightweight and bendable for easy handling.
  · Suitable for both suction and delivery.

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	10 jours

• 

  Flexible Ti-power, modèle WS

  TIGERS POLYMER

  WT pressure resistant type. Lightweight with excellent flexibility.
  
  [Features]
  · For water intake and drainage performed in civil engineering work, etc.
  · WT pressure resistant type.
  · A reinforcing cord is included, conferring excellent pressure resistance.
  · Lightweight and flexible.
  · Well suited for delivery and suction use.
  · WS type is right handed

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	10 jours

• 

  Flexible Ti-power, modèle WR

  TIGERS POLYMER

  Maximum allowable pressure resistance of 1.0 MPa (10.2 kgf/cm2). (φ 300 is 0.50 Mpa) It boasts superior wear resistance thanks to special materials in its inner layer.
  
  [Features]
  ▪ Maximum allowable pressure 1.0 Mpa {10.2 kgf/cm2}:It has excellent pressure resistance (with outer tube caulking/inner tube expansion fittings).
  ・Special enter layer materials provided with excellent abrasion resistance.
  ▪ Its ability to be lengthened can streamline piping work.

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	10 jours

• 

  Flexible Ti-power, modèle FC (flexible de gunitage)

  TIGERS POLYMER

  With little expansion under pressurization, this hose has superior pressure-resistant performance. It has excellent abrasion resistance. Use of an inner cylinder expansion fitting smooths the inner surface, to smooth out the fluid flow.

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	10 jours

• 

  Flexible cristal électrostatique type W

  TIGERS POLYMER

  Anti-static crystal hose WT type. Hose for transporting powder and granuals
  
  [Features]
  · Excellent anti-static effect from use of antistatic mixed PVC.
  ･ Soft portion is transparent, allowing confirmation of contents

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	10 jours

• 

  Flexible cristal, modèle E

  TIGERS POLYMER

  Smooth inner and outer surfaces, with grounding wire. Hose for Transporting Powder and Granules
  
  [Features]
  · Contains grounding wire, so an excellent antistatic effect is also conferred.
  ･ Contents can be checked since it is transparent.
  · Suitable for delivery.

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	10 jours

• 

  Flexible cristal, modèle WA

  TIGERS POLYMER

  Excellent heat resistance and wear resistance. Contains hard steel wire, so an antistatic effect is also conferred.
  
  [Features]
  · Features excellent heat resistance and can withstand hot air at 100°C when piping is straight.
  · Contains hard steel wire, so an excellent antistatic effect is also conferred.

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	10 jours

• 

  Ti-Eco léger électrostatique, modèle W

  TIGERS POLYMER

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	10 jours

• 

  Flexible HiNet

  TIGERS POLYMER

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	10 jours

Loading...