Couronnes de perçage（Shank Type：Tige de fraise Page 2）

?* À propos du délai d'expédition et des prix

• 

  TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Stub

  MISUMI

  Standard drills that are effective for iron-based materials are assorted in 0.1 mm increments at impressive low prices

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	47.71 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular

  MISUMI

  By applying three rake + R thinning, it demonstrates a high level of afferent.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	56.44 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub

  MISUMI

  A drill for high-speed and high feed machining with diameter plus tolerance

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	42.01 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Regular

  MISUMI

  Capable of high feed and high speed cutting on everything from standard steel to stainless steel.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	49.75 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  TiAlN Coated Carbide High-Speed High-Feed Machining Drill, With Oil Holes / Stub, Regular

  MISUMI

  High-speed and high-feed drill with oil holes that further improves the efficiency

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	111.36 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  TiAlN Coated Carbide Drill, Regular Model with Oil Holes

  MISUMI

  A drill with oil holes that achieves high-efficiency machining

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	87.11 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  TS Coated Carbide Drill for High-Hardness Steel Machining, With Corner Radius / Stub

  MISUMI

  A corner radius type of the high-hardness steel series

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	69.75 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  TS Coated Carbide Drill for High-Hardness Steel Machining, Stub Model, Regular

  MISUMI

  A carbide drill for high hardness steel that does not rely on electro-discharge machining

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	58.66 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  TS Coated Carbide Drill for High-Hardness Steel Machining, Small Diameter / Stub / Regular

  MISUMI

  A small radius type of the high-hardness steel series

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	43.70 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  TiAlN Coated Carbide Drill for Stainless Steel Machining, Composite Spiral / Regular

  MISUMI

  Composite helix drill with high durability that's ideal for the drilling of stainless steel

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	113.09 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  DLC Coated Carbide Drill for Aluminum Machining, Composite Spiral / Regular Model

  MISUMI

  Composite helix drill with high durability that's ideal for the drilling of aluminum

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	159.56 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  DLC Coated Carbide Drill for Aluminum Machining, Regular

  MISUMI

  DLC coated drill that's dedicated for aluminum alloy

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	87.13 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Carbide Burnishing Drill, Straight Model

  MISUMI

  High-precision drilling of aluminum is achieved without a pilot hole

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	8 jours

• 

  Carbide Burnishing Drill, Stepped Model

  MISUMI

  High-precision drilling of aluminum is achieved without a pilot hole

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	8 jours

• 

  TiAlN Coated Carbide Drill for Cast Iron Machining, 3-Flute / Regular

  MISUMI

  A drill for cast iron that's ideal for mass production

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	72.95 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  TiAlN Coated Powdered High-Speed Steel Drill, End Mill Shank / Regular Model

  MISUMI

  Sophisticated deep hole drilling that's made possible by well-balanced models that are aimed for the highest standards in high-speed steel

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	16.35 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  TiN Coated High-Speed Steel Drill, End Mill Shank / Stub

  MISUMI

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	10.69 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  TiN Coated High-Speed Steel Drill, End Mill Shank / Regular

  MISUMI

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	10.37 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Foret AG-ESS AGESS

  NACHI(FUJIKOSHI)

  Coated high-speed drill that realizes high speeds and high feed rates approaching that of carbide drills.
  [Features]
  · New AG coating with excellent heat resistance and abrasion resistance is the best match for next generation high alloy high-speed steel.
  · 50C type capable of high-speed machining at a cutting speed of 60 m/min.
  · The next generation of high alloy steel HSS achieves both anti-chipping performance and friction resistance performance.
  · Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum.
  [Applications]
  · Convenient for lathes where stable machining of carbide is difficult and low-rigidity processing machines.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	14.91 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua, 3 cannelures AQD3F

  NACHI(FUJIKOSHI)

  3-flute carbide drill capable of high-precision drilling and reamer-less processing.
  [Features]
  · High-precision drilling is possible due to the 3-flute cutting edge excellent in cutting balance. It also supports reamer-less processing.
  · Aqua Drill 3-Flute has a proprietary thinning shape and good sharpness for minimal cutting resistance.
  · Highly lubricating aqua coating and groove shape for excellent chipping discharge without clogging, enabling consistent hole drilling.
  [Applications]
  · High-precision drilling is made possible by the 3-flute cutting edge with excellent cutting balance and negative corner with high centrality.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	116.31 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua EX avec trou d'huile 5D AQDEXOH5D

  NACHI(FUJIKOSHI)

  Aqua Drill EX series solid carbide drills with internal coolant.
  [Features]
  · Product lineup is for 3D, 5D and 8D boring depths.
  · Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
  · Aqua EX coating achieves stable long life.
  · Capable of stable wet processing and MQL processing.
  · For highly-efficient hole drilling up to 5 times the drill diameter.
  [Applications]
  · Ideal for stable processing of mild steel to high hardness materials, as well as work materials with difficult chip processing.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	120.91 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua type standard AQDR

  NACHI(FUJIKOSHI)

  A carbide drill that demonstrates outstanding performance in dry processing and high speed wet processing.
  [Features]
  · Adopts Aquacoat with excellent heat resistance and rich lubrication with the work material.
  · Aqua coating and groove shape for excellent chipping discharge, enabling consistent hole drilling.
  · Chipping resistance and corner abrasion resistance are improved due to the special cutting edge shape.
  · High-speed wet machining is 2 to 3 times that of other companies' products, with dry machining efficiency equal to or greater than that of wet machining.
  [Applications]
  · Ideal for high-speed and long-life machining for anything from raw materials to high-hardness steel.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	87.80 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret AG-ES AGES

  NACHI(FUJIKOSHI)

  Coated high-speed drill that realizes high speeds and high feed rates approaching that of carbide drills.
  [Features]
  · New AG coating with excellent heat resistance and abrasion resistance is the best match for next generation high alloy high-speed steel.
  · 50C type capable of high-speed machining at a cutting speed of 60 m/min.
  · Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum.
  · The next generation of high alloy steel HSS achieves both anti-chipping performance and friction resistance performance.
  [Applications]
  · Also convenient for lathes where stable machining of carbide is difficult and low-rigidity processing machines.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	24.26 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret SG-FAX avec trou d'huile SGOH

  NACHI(FUJIKOSHI)

  Oil hole HSS drill of the highest quality featuring a long service life, with high-grade powder HSS and SG coating.
  [Features]
  · Optimized cutting edge, groove shape and high precision achieve stable processing and high hole positioning accuracy.
  · Achieves high-efficiency machining based on high speed and high feed.
  [Applications]
  · Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	251.22 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua EX type standard AQDEXR

  NACHI(FUJIKOSHI)

  Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
  [Features]
  · Shape of the new cutting edge greatly improves chip discharge performance.
  · The cutting resistance is reduced to provide stable machining even on small machines.
  · A special lubrication function film is provided on the surface layer of the AlCrSi coating.
  · Longer life by improving lubricity and heat/abrasion resistance.
  · The unique thinning shape increases biting and reduces cutting resistance.
  [Applications]
  · Ideal for thin work materials and small low-rigidity processing machines.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	113.17 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua FC AQDFC

  NACHI(FUJIKOSHI)

  A carbide drill with an optimum design for FC materials that provides a longer service life than conventional products.
  [Features]
  · Combination of cemented carbide ideal for FC material and Aquacoat with excellent heat and wear resistance.
  · Longer life than conventional FC drills.
  · The special cutting edge treatment suppresses wear of the corners most easily damaged in FC processing.
  · A lifetime of 70% of that of new products is guaranteed after re-grinding, even if there is no recoating.
  [Applications]
  · Ideal for long life machining of FC, FCD, and low carbon steel.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	111.96 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua type dur AQDH

  NACHI(FUJIKOSHI)

  Carbide drill capable of high efficiency machining of high-hardness steel of 50 to 70 HRC.
  [Features]
  · It uses carbide alloy ideal for high-hardness steel machining and AquaCoat, which has excellent heat resistance and abrasion resistance.
  · Wear resistance and chipping resistance are greatly improved.
  · Uses a thick core and weak torsion.
  · The high rigidity makes it resistant against vibration as well, preventing damage from microchipping, etc.
  [Applications]
  · High performance machining of 50 to 70 HRC high hardness steel is possible.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	35.79 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Micro-foret Aqua AQMD

  NACHI(FUJIKOSHI)

  A drill that is difficult to break and stable for machining.
  [Features]
  · Employs cemented carbide ideal for small diameter hole drilling.
  · A drill with high rigidity is used.
  · The cutting load has been reduced by circumferential clearance and thinning.
  [Applications]
  · Hard to break and capable of stable processing thanks to the high-rigidity shape and the use of carbide alloy ideal for small diameter drilling work.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	39.65 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Foret G avec trou d'huile GOH

  NACHI(FUJIKOSHI)

  General purpose coated oil hole drill.
  [Features]
  · The original thinning shape (3-rake) improves centripedality and chip separation.
  · TiN coating and internal lubrication provide a cooling effect that results in a long D lifetime.
  [Applications]
  · Capable of high efficiency machining of materials ranging from steel to stainless steel and aluminum.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	280.91 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua EX type extra-court AQDEXS

  NACHI(FUJIKOSHI)

  Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
  [Features]
  · Shape of the new cutting edge greatly improves chip discharge performance.
  · The cutting resistance is reduced to provide stable machining even on small machines.
  · A special lubrication function film is provided on the surface layer of the AlCrSi coating to improve the lubricity, heat resistance and abrasion resistance, thereby prolonging the service life.
  [Applications]
  · The unique thinning shape increases biting and reduces cutting resistance.
  · Stable cutting performance even with thin work materials and small low-rigidity processing machines.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	95.75 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret AG-SUS type standard AGSUSR

  NACHI(FUJIKOSHI)

  Drill capable of stable hole drilling with AG coating excellent in heat resistance.
  [Features]
  · Newly developed optimal drill shape adopted for machining high alloy HSS, AG coatings, and stainless steel.
  · It has a cutting edge shape that's excellent in the segmentation of chips and a groove shape that achieves both high chip discharge performance and drill rigidity.
  · Stable machining accuracy is achieved by using a high-precision end mill shank.
  [Applications]
  · Optimal for stainless steel.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	9.71 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret DLC type standard DLCDR

  NACHI(FUJIKOSHI)

  A drill for high-speed wet machining and dry machining of aluminum alloys.
  [Features]
  · It utilizes DLC coating (diamond-like carbon) with high hardness, a low coefficient of friction and abrasion resistance.
  · Dry machining of aluminum alloy is possible.
  · Melting induced adhesion is minimal due to the low friction coefficient of the DLC coating and special groove shape, also making chips less likely to clog.
  · Allows also non-step boring of hole depth 5D.
  [Applications]
  · Capable of dry machining of aluminum alloy, and non-step machining of hole depths up to 3D.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	129.69 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Micro-forets DLC DLCMD

  NACHI(FUJIKOSHI)

  An aluminum drill for small diameter hole drilling, which performs high speed wet and dry machining of aluminum alloys.
  [Features]
  · It utilizes DLC coating (diamond-like carbon) with high hardness, a low coefficient of friction and abrasion resistance.
  · Melting induced adhesion is minimal due to the low friction coefficient of the DLC coating and special groove shape, also making chips less likely to clog.
  · Allows non-step boring of hole depth 5D.
  [Applications]
  · Capable of dry machining of aluminum alloy, and non-step machining of hole depths up to 3D.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	59.34 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua EX avec trou d'huile 8D AQDEXOH8D

  NACHI(FUJIKOSHI)

  Aqua Drill EX series solid carbide drills with internal coolant.
  [Features]
  · Product lineup is for 3D, 5D and 8D boring depths.
  · Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
  · Aqua EX coating achieves stable long life.
  [Applications]
  · Stable processing of mild steel to high hardness materials.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	174.14 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua type extra-court AQDS

  NACHI(FUJIKOSHI)

  A carbide drill that demonstrates outstanding performance in dry processing and high speed wet processing.
  [Features]
  · Adopts Aquacoat with excellent heat resistance and rich lubrication with the work material.
  · Aqua coating and groove shape for excellent chipping discharge, enabling consistent hole drilling.
  · Chipping resistance and corner abrasion resistance are improved due to the special cutting edge shape.
  · High-speed wet machining is 2 to 3 times that of other companies' products, with dry machining efficiency equal to or greater than that of wet machining.
  [Applications]
  · Ideal for high-speed and long-life machining for anything from raw materials to high-hardness steel.
  · Drill for dry machining.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	101.70 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Forer micro-rotatif extra-dur pour usinage de l'acier inoxydable MRS-GDL

  OSG

  Ideal for small diameter stainless steel processing

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	33.20 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  En carbure pour acier haute dureté, type extra-court FH-GDS

  OSG

  Developed for machining small diameter holes in hardened steel, it is suitable for high-precision and long-life machining of shallow holes (up to 3D or so)

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	52.37 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  En carbure pour acier haute dureté, type moyen FH-GDN

  OSG

  Developed for machining small diameter holes in hardened steel, it is capable of machining deep holes (up to 7D or so)

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	57.45 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret en carbure de très faible diamètre, type 10D UVM-DRL-10D

  OSG

  Enables unprecedented ultra-small diameter drilling range with a minimum diameter of φ0.02.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	106.94 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret en carbure de très faible diamètre, type 5D UVM-DRL-5D

  OSG

  Enables unprecedented ultra-small diameter drilling range with a minimum diameter of φ0.02.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	91.21 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret de tête en carbure de très faible diamètre UVM-LDS

  OSG

  The collaboration with UVM-DRL enables high-precision drilling

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	153.29 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret en carbure ultra-robuste avec trou d'huile, pour cuivre / aluminium CAO-GDXL

  OSG

  Steplessly processes super deep holes of 15D to 30D. Gun drill and HSS drill that achieves several times higher machining efficiency and tool service life

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	355.40 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Tige MT pour acier inoxydable / acier doux MT-SUS-GDR

  OSG

  MT shank is added, expanding the usage in general purpose machines.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	45.86 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Nexus type extra-court NEXUS-GDS

  OSG

  Drill with WDI coating suitable for stainless steel, mild steel, aluminum alloy, copper alloy and the like that suppresses peripheral margin wear and achieves long service life at high speeds

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	14.40 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Nexus type standard NEXUS-GDR

  OSG

  Drill with WDI coating suitable for stainless steel, mild steel, aluminum alloy, copper alloy and the like that suppresses peripheral margin wear and achieves long service life at high speeds

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	26.20 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

Loading...