Connecteurs en nylon（Forme du connecteur：Rond）

?* À propos du délai d'expédition et des prix

• 

  Boîtier série CB01【10 pièces par conditionnement】

  SUMIKO TEC

  Small waterproof connector with 2.5-mm pitch. · Watertightness is secured by a retainer that pushes the contact into the built-in wire seal.
  
  [Features]
  · A small, highly reliable waterproof connector. Watertightness is secured by a retainer that pushes and holds the terminal into the wire seal that is built into the connector.
  · Two relay and circuit-board types are available. The circuit-board type is equipped with a reverse-insertion prevention boss.
  · Applications generally include electrical products that require waterproof performance. Such examples include: electronic appliances for bathtubs, washlet toilets, water heaters, industrial refrigerators, washing machines, water purifiers, and outdoor motors, etc.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	7.49 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteurs SM【1-1,000 pièces par conditionnement】

  JST

  This small-type relay connector is equipped with a panel lock mechanism, and offers high reliability with a smaller size, more dense design, and the use of micro-currents.
  
  [Features]
  ・This small-type relay connector with 2.5-mm pitch offers high reliability with a smaller size, more dense design, and the use of micro-currents.
  ・High contact pressure, dual contact.
  · Shell type housing.
  ・Applicable to a wide range of panels.
  ▪ Arm lock mechanism.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	0.11 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteur OK pour câblage à insertion dans une pièce

  OHM ELECTRIC

  Nothing required for crimping; simply insert the copper wire to complete the connection.
  
  [Features]
  ・Nothing required for crimping.
  ・Simply insert the copper wire to complete the connection.
  ・Wires can be removed and the connection can be changed easily.
  ・Stable connection without individual discrepancies.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	0.26 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteur XH【1-50 pièces par conditionnement】

  JST

  Based on the high reliability and versatility of the NH series, this connector has been designed to be smaller, with a mounting height of 9.8 mm.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	0.55 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîtier série CL07【10 pièces par conditionnement】

  SUMIKO TEC

  A 5.8 mm pitch waterproof connector capable of handling large currents (max 10A). Three types of waterproof packing are available, providing waterproofing in a variety of sheath sizes. Waterproof packing required (sold separately). Parts with 3 cores or less (CL07D series) are waterproof; parts with 4 cores or more (CL07A series) are drip-proof.
  
  [Features]
  · A drip-proof connector used in environments where mist or droplets form on wires in refrigerated showcases, water heaters, etc.
  · Stable contacts provide for superior mechanical and electrical performance.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	5.67 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur SPTV【100 pièces par conditionnement】

  NICHIFU TERMINAL INDUSTRIES

  For equipment internal wiring. It is a connector that does not require special tools and is suitable for easy connection. (SPT)

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	51.59 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteur Easy-Lock série 110【500 pièces par conditionnement】

  NICHIFU TERMINAL INDUSTRIES

  A newly developed lock mechanism inside the connector enables the connector to be gently and securely installed in tab terminals. (110 Series)
  
  [Features]
  · Uses a newly developed locking mechanism.
  · Enables a reliable and highly safe connection by the motion of a locking mechanism where part of the terminal is a spring, thus preventing loss of connection caused by vibration or pulling out the electrical line.
  · Soft-touch.
  · Gentle and smooth mounting on tab terminals, dramatically reducing burden on workers and greatly improving workability.
  · Also easy to remove.
  · The connector can be easily pulled out by sliding the housing to release the lock mechanism.
  · Soft-touch allows worker burden to be reduced in the same way as for mounting the connector.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	49.78 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteur filaire type enfichable【20-50 pièces par conditionnement】

  NICHIFU TERMINAL INDUSTRIES

  Pluggable wire connector for indoor wiring. Has a highly reliable, 2-point contact spring structure. The transparent cover enables the wires to be visually checked.
  
  [Features]
  · A highly safe, soft-touch product that utilizes an easy-lock connector mechanism.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	15.13 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Série BL 3.50

  WEIDMUELLER

  3.5mm pitch screw connection. It is a classic product.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	1.43 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Série BLC 5.08mm

  WEIDMUELLER

  [Features]
  ・ 5.08-mm pitch connection.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	1.77 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteurs CL【1-500 pièces par conditionnement】

  JST

  These are connectors that allow branching and short-circuit low resistance connections using simple tools such as pliers.
  
  [Features]
  ・ Insulation displacement connection is possible by simple operation.
  ・There is no need to strip the electrical wire sheathing when connecting.
  ・ No special tool is required. The internal contact (fork-shaped contact) is securely pressed against the electrical wire. The connection can be completed by simply clamping the connector body using pliers, etc.
  ・Superior insulation performance.
  ・Insulating the connecting section is not required.
  ・The pre-installed housing provides highly reliable insulating effectiveness.
  ・Mechanism for temporarily securing electrical wires.
  ・Includes a built-in mechanism for temporarily securing electrical wires to prevent wire-slip or connection errors when connecting wires.
  ・ Workability has been improved.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	1.14 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur HL (pour connexions de relais)【5,000-6,000 pièces par conditionnement】

  JST

  Utilizing free spring contact structure, this connector is designed with a retainer, inner lock, and other safety features.
  
  [Features]
  · A connector with 3.96-mm pitch that utilizes free spring contact structure.
  · Besides the excellent reliability offered by the unique stress-relaxation ability, a retainer, inner lock, and other safety features are also designed into the product.
  · Utilizing a free spring contact structure.
  · Housing lance method.
  ▪ Interlock structure.
  · A retainer.
  · Panel lock structure.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	192.86 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur de relais à sertir【20 pièces par conditionnement】

  NICHIFU TERMINAL INDUSTRIES

  A relay connector that does not require special crimping tools.
  
  [Features]
  · Male-female connections can be made with a single connector.
  · No wire coating removal required.
  · Easily connected with pliers.
  · Can be used in a multi-lead capacity when joined to a connector.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	5.20 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

Loading...