THK Vis à billes（Catégorie du produit：Vis à billes de précision）

?* À propos du délai d'expédition et des prix

• 

  Vis à billes / bride compacte / diamètre 4 - 14 / pas 1 - 5 / C3, C5, C7 / MDK

  THK

  [Features]
  · This product has no machining on the shaft ends, and is a standard series precision ball screw mass-produced at specified lengths.
  · Additional work on screw shaft ends can be easily performed.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	458.34 €
  Délai d'expédition minimum ：	23 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes / bride rectangulaire / diamètre 12 / pas 5 / C3, C5, C7 / BNK

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
  
  [Features]
  · The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
  · The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
  · The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
  · An appropriate amount of grease is enclosed with ball screw nuts.
  · Also, for ball screw nuts larger than the BNK0802 shape model, a labyrinth seal is built-in (BNK1510 shape, BNK1520 shape, BNK1616 shape, BNK2020 shape, and BNK2520 shape use a combination end cap).
  · In addition, for cases where contaminants are a concern, dust-proof equipment (bellows, etc.) must always be used to completely cover the screw shafts.
  · BNK Type: Dimensions Table—A15-116 Standardized ball screw with a screw shaft diameter of 4 to 25 mm, and lead of 1 to 20 mm.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	581.47 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes / bride rectangulaire / diamètre 12 / pas 2 / C3, C5, C7 / BNK

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
  
  [Features]
  · The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
  · The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
  · The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	622.50 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes / bride ronde / diamètre 16 - 25 / pas 5 - 12 / C5, C7 / BIF

  THK

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	1,051.28 €
  Délai d'expédition minimum ：	23 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes / bride rectangulaire / diamètre 6 / pas 1 / C3, C5, C7 / BNK

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
  
  [Features]
  · The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
  · The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
  · The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	644.77 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes / bride rectangulaire / diamètre 10 / Pas 2 / C3, C5, C7 / Précontrainte, jeu / BNK

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
  
  [Features]
  · The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
  · The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
  · The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	612.25 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes / bride rectangulaire / diamètre 14 / pas 8 / C5, C7 / BNK

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
  
  [Features]
  · The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
  · The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401, 0501, or 0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
  · The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	831.17 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes / bride ronde / diamètre 16 - 25 / pas 5 - 12 / C5, C7 / BNF

  THK

  [Features]
  · This product has no machining on the shaft ends, and is a standard series precision ball screw mass-produced at specified lengths.
  · Additional work on screw shaft ends can be easily performed.
  · Also, a variety of nut shapes are available to suit different purposes such as the BNFN shape double nut, BNF shape single nut, BIF shape offset preload nut, MDK shape miniature ball screw, and MBF shape.
  · Dust-proof: The following model number nuts have labyrinth seals mounted.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	911.11 €
  Délai d'expédition minimum ：	23 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes / bride rectangulaire / diamètre 4 / pas 1 / C3, C5, C7 / BNK

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	631.09 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes / bride rectangulaire / diamètre 8 / pas 1 / C3, C5, C7 / BNK

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
  
  [Features]
  · The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
  · The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
  · The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
  [Dust-proofing and lubrication.]
  · An appropriate amount of grease is enclosed with ball screw nuts.
  · Also, for ball screw nuts larger than the BNK0802 shape model, a labyrinth seal is built-in (BNK1510 shape, BNK1520 shape, BNK1616 shape, BNK2020 shape, and BNK2520 shape use a combination end cap).
  · In addition, for cases where contaminants are a concern, dust-proof equipment (bellows, etc.) must always be used to completely cover screw shafts.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	646.49 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes / bride compacte / diamètre 4 - 14 / Pas 1, 2, 4 / C3, C5, C7 / MBF

  THK

  [Features]
  · This product has no machining on the shaft ends, and is a standard series precision ball screw mass-produced at specified lengths.
  · Additional work on screw shaft ends can be easily performed.
  · Also, a variety of nut shapes are available to suit different purposes such as the BNFN shape double nut, BNF shape single nut, BIF shape offset preload nut, MDK shape miniature ball screw, and MBF shape.
  · Dust-proof: The following model number nuts have labyrinth seals mounted.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	645.23 €
  Délai d'expédition minimum ：	23 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes / bride compacte / diamètre 10 / Pas 10 / C5, C7 / BNK

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	1,038.07 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes / bride rectangulaire / diamètre 10 / Pas 2 / C3, C5, C7 / BNK

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	537.00 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes / bride rectangulaire / diamètre 14 / pas 2 / C3, C5, C7 / BNK

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
  
  [Features]
  · The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
  · The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
  · The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
  · An appropriate amount of grease is enclosed with ball screw nuts.
  · Also, for ball screw nuts larger than the BNK0802 shape model, a labyrinth seal is built-in (BNK1510 shape, BNK1520 shape, BNK1616 shape, BNK2020 shape, and BNK2520 shape use a combination end cap).
  · In addition, for cases where contaminants are a concern, dust-proof equipment (bellows, etc.) must always be used to completely cover screw shafts.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	518.20 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes / bride rectangulaire / diamètre 15 / pas 10 / C5, C7 / BNK

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
  
  [Features]
  · The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
  · The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
  · The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	819.19 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes / bride rectangulaire / diamètre 15 / pas 20 / C5, C7 / BNK

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
  
  [Features]
  · The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
  · The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
  · The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	848.25 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes / bride rectangulaire / diamètre 20 / pas 10 / C5, C7 / BNK

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	834.57 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes / bride rectangulaire / diamètre 20 / pas 20 / C5, C7 / BNK

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
  
  [Features]
  · The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
  · The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
  · The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	1,007.32 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes / bride rectangulaire / diamètre 8 / pas 2 / C3, C5, C7 / BNK

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
  
  [Features]
  · The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
  · The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
  · The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	564.37 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Vis à billes / bride rectangulaire / diamètre 14 / pas 4 / C3, C5, C7 / BNK

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
  
  [Features]
  · The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
  · The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
  · The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	518.20 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes / bride rectangulaire / diamètre 16 / pas 16 / C5, C7 / BNK

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
  
  [Features]
  · The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
  · The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
  · The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
  · An appropriate amount of grease is enclosed with ball screw nuts.
  · Also, for ball screw nuts larger than the BNK0802 shape model, a labyrinth seal is built-in (BNK1510 shape, BNK1520 shape, BNK1616 shape, BNK2020 shape, and BNK2520 shape use a combination end cap).
  · In addition, for cases where contaminants are a concern, dust-proof equipment (bellows, etc.) must always be used to completely cover screw shafts.
  · BNK A ball screw with shape standardization to screw shaft diameter ø4 - 25 mm and lead 1 - 20 mm.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	1,065.45 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes / bride rectangulaire / diamètre 25 / pas 20 / C5, C7 / BNK

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
  
  [Features]
  · The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
  · The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401, 0501, or 0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
  · The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	1,460.49 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes / bride rectangulaire / diamètre 8 / pas 10 / C5, C7 / BNK

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
  
  [Features]
  · This rotary ball screw is a rotary ball screw unit with a unified structure made up of a ball screw nut and a support bearing.
  · The support bearing is a large angular bearing with a contact angle of 60° that provides rigidity in the axial direction where more balls are placed.
  · The BLR type is available in precision ball screw and rolled ball screw specifications.
  · Smooth operation: provides smooth operation in comparison to the straight line movement of rack and pinion systems.
  · Also, because the screw shaft does not rotate with ball screw nut drive, there is no jumping rope phenomenon, operation is quiet, and heat produced by the unit is reduced.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	736.07 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

Loading...