Tournevis（Magnet：N/A）
| Nombre de jours d'expédition |
|
|---|
?* À propos du délai d'expédition et des prix
- 1
- 2
- 3
- 4
- Suivant >>
-
Tournevis de précision
ANEX
[Features]
· Convenient for dismantling clocks and spectacles, or rotating screws on precision devices, etc.- Remise sur volume
› Configurer maintenantà partir de∗ ： 4.52 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Tournevis hexalobé, poignée SwissGrip
PB SWISS TOOLS
[Features]
· Soft-to-the-touch Swiss grip screwdriver.
· T27-T40 include a hexagonal base.- Remise sur volume
› Configurer maintenantà partir de∗ ： 20.63 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Tournevis de précision, lot de 6
HOZAN
High-precision screwdriver set with high versatility.
[Features]
· A set of +No.0/+No.1/-1.2 x 0.32/-1.8 x 0.32/-2.3 x 0.35/-3.0 x 0.45.
· Sewn case included.
[Applications]
· Ideal for fast turning of small screws thanks to its rotary-type head that provides high workability.- Remise sur volume
› Configurer maintenantà partir de∗ ： 18.91 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
› Configurer maintenant
à partir de∗ ： 18.42 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Tournevis Phillips, embout n° 00–2
HOZAN
A screwdriver enabled to \ deal with screws in hard-to-reach places by reducing the outer diameter of the screwdriver shaft.
[Features]
· Hole diameter is compatible with deep screws because the shaft has a thinner finish than even JIS standards.
· Shaft is thin but still complies with JIS "torsional strength" standards.
· The basic hardening treatment for shaft strength is skilled full quenching.
· The polypropylene grip with pen clip, which can be inserted into your pocket, has both strength and lightness.
· Thin and tough electroless nickel plating is used to maintain accuracy.
[Applications]
· Ideal for screws in deep places as often seen with home appliances.- Remise sur volume
- Stock
› Configurer maintenantà partir de∗ ： 9.31 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
› Configurer maintenant
à partir de∗ ： 13.49 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Tournevis / tournevis à cliquet déporté avec interrupteur avant/arrière
SUNFLAG
[Features]
· Has a convenient ratchet function.
· Comes with a quick-turning dial useful for temporary tightening.
· With a forward/reverse switch.
· Torque is greatly improved with special steel.- Remise sur volume
› Configurer maintenantà partir de∗ ： 8.33 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
› Configurer maintenant
à partir de∗ ： 10.31 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Petit tournevis BBD-M75
MAEDAKINNZOKU
Baby screwdriver with round shaft.
[Features]
· Convenient for adjustment of metering and precision equipment, etc.
[Applications]
· Ideal for assembly and maintenance of electronic devices and precision equipment.
· Ideal for assembly and maintenance work automobiles, motorcycles and bicycles.› Configurer maintenantà partir de∗ ： 2.01 € Délai d'expédition minimum ： 9 jours *Prix unitaire/configuration de base
-
› Configurer maintenant
à partir de∗ ： 43.81 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Tournevis pour écrou rond
PB SWISS TOOLS
A screwdriver with excellent shock resistance.
[Features]
· It can be used for general applications. Recyclable clip. The 100-6 to 9 is equipped with a square shaft part that allows a wrench to be applied to the shaft.
· The grip surface fits the hand and the groove design is ergonomic, allowing high torque to be applied.
· The high quality and transparent CAB material is extremely resistant to impacts as well as resistant to oil and gasoline, and can be recycled.
· Gentle to the skin and comfortably gripped. Vanilla aromas are blended to suppress smells.
· The shock resistance is 1 t. Resistant to oil and gasoline.
[Applications]
· Ideal for manufacturing industries, assembly sites, repairs, artisan handcrafting, DIY, hobbies, and more.- Remise sur volume
› Configurer maintenantà partir de∗ ： 26.91 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Lame porte-embout hexagonal 1 / 4 po pour tournevis commutable
PB SWISS TOOLS
Used by attaching to a 1/4" (6.35 mm) hex bit. Can be combined and used with 215A, 7215AG or 8215A handles for the replacement screwdrivers.- Remise sur volume
› Configurer maintenantà partir de∗ ： 25.44 € Délai d'expédition minimum ： 9 jours *Prix unitaire/configuration de base
-
Lames de rechange pour tournevis (hexalobées)
PB SWISS TOOLS
215 series hexalobular screwdriver blade. Can be combined and used with 215A, 7215AG or 8215A handles for the replacement screwdrivers.- Remise sur volume
› Configurer maintenantà partir de∗ ： 18.64 € Délai d'expédition minimum ： 9 jours *Prix unitaire/configuration de base
-
Lames de rechange pour tournevis de précision (hexalobées)
PB SWISS TOOLS
53 series blade. Can be combined and used with 53 TELESCOPE handles for replacement screwdrivers.› Configurer maintenantà partir de∗ ： 13.34 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Tournevis Torx® en T, poignée en résine
KTC(KYOTO TOOL)
[Features]
· Using the hexagon affixed to the base of the shaft, a wrench can be used to aid in turning.
· Tip shape can be determined by size display on grip end.
[Applications]
· General purpose tool- Remise sur volume
› Configurer maintenantà partir de∗ ： 21.09 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
› Configurer maintenant
à partir de∗ ： 48.57 € Délai d'expédition minimum ： 3 jours *Prix unitaire/configuration de base
-
› Configurer maintenant
à partir de∗ ： 8.31 € Délai d'expédition minimum ： 3 jours *Prix unitaire/configuration de base
-
› Configurer maintenant
à partir de∗ ： 259.72 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Tournevis pour soupape D-13
HOZAN
A dedicated screwdriver convenient for attaching/detaching valve cores of American type valves (for tire tubes).
[Features]
· The handle is hexagonal which makes it easy to turn fast.
· Handle diameter 10.0 mm φ.
· Weight: 20 g.
[Applications]
· Attachment and removal of the valve core of American type valves (for tire tubes).› Configurer maintenantà partir de∗ ： 4.27 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Tournevis tronqué SUS SSSD-M2
MAEDAKINNZOKU
An all-stainless steel stubby flathead screwdriver which is lightweight thanks to its sealed hollow grip section, and which features excellent workability and corrosion resistance.
[Features]
· The shaft uses martensitic stainless steel material, and the grip uses austenitic stainless steel material.
· Stainless steel tool with emphasized strength, corrosion resistance, chemical resistance and hygiene.
[Applications]
· Ideal for food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development.
· Ideal for places that use stainless steel bolts and nuts such as plants, waterproofing work, plumbing and cleaning equipment.› Configurer maintenantà partir de∗ ： 34.61 € Délai d'expédition minimum ： 9 jours *Prix unitaire/configuration de base
-
Tournevis tronqué SUS SSSD-P2
MAEDAKINNZOKU
An all-stainless steel stubby Phillips screwdriver which is lightweight thanks to its sealed hollow grip section, and which features excellent workability and corrosion resistance.
[Features]
· The shaft uses martensitic stainless steel material, and the grip uses austenitic stainless steel material.
· Stainless steel tool with emphasized strength, corrosion resistance, chemical resistance and hygiene.
[Applications]
· Food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development, plants, waterproofing construction, and plumbing work.
· Ideal for places that use stainless steel bolts and nuts such as cleaning equipment.› Configurer maintenantà partir de∗ ： 34.61 € Délai d'expédition minimum ： 9 jours *Prix unitaire/configuration de base
-
Tournevis SUS SMD-100
MAEDAKINNZOKU
An all-stainless steel flathead screwdriver which is lightweight thanks to its sealed hollow grip section, and which features excellent workability and corrosion resistance.
[Features]
· The shaft uses martensitic stainless steel material, and the grip uses austenitic stainless steel material.
· Stainless steel tool with emphasized strength, corrosion resistance, chemical resistance and hygiene.
[Applications]
· Ideal for food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development.
· Ideal for places that use stainless steel bolts and nuts such as plants, waterproofing work, plumbing and cleaning equipment.› Configurer maintenantà partir de∗ ： 44.85 € Délai d'expédition minimum ： 9 jours *Prix unitaire/configuration de base
-
Tournevis SUS SMD-150
MAEDAKINNZOKU
Lightweight, all-stainless flathead screwdriver with excellent workability and corrosion resistance.
[Features]
· The shaft uses martensitic stainless steel material, and the grip uses austenitic stainless steel material.
· Stainless steel tool with emphasized strength, corrosion resistance, chemical resistance and hygiene.
[Applications]
· Food-related equipment, medical equipment, cleanrooms, precision machinery, and ships.
· For marine sports, marine development, plants, waterproof construction and water supply construction.
· Ideal for places that use stainless steel bolts and nuts such as cleaning equipment.› Configurer maintenantà partir de∗ ： 53.56 € Délai d'expédition minimum ： 9 jours *Prix unitaire/configuration de base
-
Tournevis SUS SPD-001
MAEDAKINNZOKU
An all-stainless steel Phillips screwdriver which is lightweight thanks to its sealed hollow grip section, and which features excellent workability and corrosion resistance.
[Features]
· Stainless steel tool with emphasized strength, corrosion resistance, chemical resistance and hygiene.
[Applications]
· For food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development, plants, etc.
· For waterproofing work, plumbing and cleaning equipment, etc.
· Optimal for locations that use stainless steel bolts and nuts.› Configurer maintenantà partir de∗ ： 40.48 € Délai d'expédition minimum ： 9 jours *Prix unitaire/configuration de base
-
Tournevis SUS SPD-003
MAEDAKINNZOKU
An all-stainless steel Phillips screwdriver which is lightweight thanks to its sealed hollow grip section, and which features excellent workability and corrosion resistance.
[Features]
· This stainless steel tool is made of martensitic material that emphasizes strength, is rust resistant, and has excellent corrosion resistance, chemical resistance and hygienic properties.
[Applications]
· Food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development, plants, waterproofing construction, and plumbing work.
· Ideal for places that use stainless steel bolts and nuts such as cleaning equipment.› Configurer maintenantà partir de∗ ： 53.56 € Délai d'expédition minimum ： 9 jours *Prix unitaire/configuration de base
-
Jeu de tournevis SUS SD8
MAEDAKINNZOKU
An 8-piece all-stainless steel screwdriver set, which is lightweight thanks to its sealed hollow grip section, and which features excellent workability and corrosion resistance.
[Features]
· The shaft uses martensitic stainless steel material, and the grip uses austenitic stainless steel material.
· Stainless steel tool with emphasized strength, corrosion resistance, chemical resistance and hygiene.
[Applications]
· Ideal for food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development.
· Ideal for places that use stainless steel bolts and nuts such as plants, waterproofing work, plumbing and cleaning equipment.› Configurer maintenantà partir de∗ ： 237.38 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Petit tournevis BBD-P00
MAEDAKINNZOKU
Baby screwdriver with round shaft.
[Features]
· Convenient for adjustment of metering and precision equipment, etc.
[Applications]
· Ideal for assembly and maintenance of electronic devices and precision equipment.
· Ideal for assembly and maintenance work automobiles, motorcycles and bicycles.- Remise sur volume
› Configurer maintenantà partir de∗ ： 2.55 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Tournevis à impact D-963
HOZAN
Impact screwdriver that can be switched between left and right rotation.
[Features]
· Rusted screws can be loosened easily by hitting it with the hammer as the screwdriver bit rotates at high torque.
· It uses a flanged protective grip that protects the hand.
· Removing the bit holder allows a 12.7 mm square socket to be attached.
· Case included.
[Applications]
· Ideal for turning screws, etc. that take effort to loosen.› Configurer maintenantà partir de∗ ： 3.50 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Tournevis réglable, céramique interchangeable D-280
HOZAN
· A perfect driver for adjusting pre-set knobs/capacitors on printed circuit boards.
[Features]
· Uses zirconia ceramic that does not cause coil misalignment.
· Has greater durability against wear and damage than alumina ceramics.
* Alumina ceramic: Fine ceramic. Besides abrasion resistance, it is excellent in heat and chemical resistance.
[Applications]
· Combination: D-280, -0.9 x -1.8 mm, blade thickness 0.4 mm (D-282), -1.3 x -2.6 mm, blade thickness 0.4 mm (D-283).› Configurer maintenantà partir de∗ ： 58.70 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Tournevis SUS, SMD-075
MAEDAKINNZOKU
An all-stainless steel flathead screwdriver which is lightweight thanks to its sealed hollow grip section, and which features excellent workability and corrosion resistance.
[Features]
· The shaft uses martensitic stainless steel material, and the grip uses austenitic stainless steel material.
· Stainless steel tool with emphasized strength, corrosion resistance, chemical resistance and hygiene.
[Applications]
· Food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development, plants, waterproofing construction, plumbing work, etc.
· Ideal for places that use stainless steel bolts and nuts such as cleaning equipment.› Configurer maintenantà partir de∗ ： 40.48 € Délai d'expédition minimum ： 9 jours *Prix unitaire/configuration de base
-
Petit tournevis BBD-M50
MAEDAKINNZOKU
Baby screwdriver with round shaft.
[Features]
Convenient for adjustment of metering and precision equipment, etc.
[Applications]
· For assembly and maintenance of electronic devices and precision equipment.
· Assembly and maintenance work of automobiles, motorcycles and bicycles.- Remise sur volume
› Configurer maintenantà partir de∗ ： 6.84 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Jeu de tournevis de réglage en céramique D-17
HOZAN
A long screwdriver that's convenient for adjustment inside equipment.
[Features]
· With a sewn case that is resistant to friction and pulling.
· Uses zirconia ceramic that stands out among fine ceramics specifically for its exceptional strength and elasticity.
· Has high abrasion resistance and maintains cutting edge precision for a long time even for tip-type semi-fixed knob adjustment work.
[Applications]
· The 110 mm long shaft makes it ideal for adjusting parts in deep places.- Remise sur volume
› Configurer maintenantà partir de∗ ： 64.90 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Tournevis SUS, SPD-002
MAEDAKINNZOKU
An all-stainless steel Phillips screwdriver which is lightweight thanks to its sealed hollow grip section, and which features excellent workability and corrosion resistance.
[Features]
· The shaft uses martensitic stainless steel material, and the grip uses austenitic stainless steel material.
· Stainless steel tool with emphasized strength, corrosion resistance, chemical resistance and hygiene.
[Applications]
· Ideal for food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development.
· Ideal for places that use stainless steel bolts and nuts such as plants, waterproofing work, plumbing and cleaning equipment.› Configurer maintenantà partir de∗ ： 44.85 € Délai d'expédition minimum ： 9 jours *Prix unitaire/configuration de base
-
Tournevis SUS, SUMD
MAEDAKINNZOKU
For tightening and loosening screws. The shaft is made of martensitic stainless steel.› Configurer maintenantà partir de∗ ： 23.36 € Délai d'expédition minimum ： 9 jours *Prix unitaire/configuration de base
-
Tournevis tête plate D-630 – D-655
HOZAN
[Features]
· Designed to deal with the screws in hard-to-reach places by reducing the outer diameter of the screwdriver shaft.
· Hole diameter is compatible with deep screws like those in household appliances because the shaft has a thinner finish than even JIS standards.
· Even when thin, "torsional strength" abides by JIS standards.
· The basic hardening treatment for shaft strength is thermal hardening treatment involving skilled full quenching.
· The polypropylene grip with pen clip has both strength and lightness.
· It uses electroless nickel plating that's thin and tough in order to maintain accuracy, providing surface processing that emphasizes accuracy and strength.
[Applications]
· Convenient for tightening and loosening screws.› Configurer maintenantà partir de∗ ： 5.10 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
› Configurer maintenant
à partir de∗ ： 5.54 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
› Configurer maintenant
à partir de∗ ： 19.11 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
› Configurer maintenant
à partir de∗ ： 16.74 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
› Configurer maintenant
à partir de∗ ： 1.50 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
› Configurer maintenant
à partir de∗ ： 139.97 € Délai d'expédition minimum ： 4 jours *Prix unitaire/configuration de base
-
› Configurer maintenant
à partir de∗ ： 26.03 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Tournevis de précision « Superfit »
ANEX
[Features]
· Has a square cross-section to increase work efficiency.
· Soft grip is adopted.- Remise sur volume
› Configurer maintenantà partir de∗ ： 4.60 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Tournevis de précision « Superfit » à pointe sphérique
ANEX
[Features]
· A high-strength type with an elastomer resin handle.
· A precision screwdriver with a long shaft.- Remise sur volume
› Configurer maintenantà partir de∗ ： 4.42 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Tournevis de précision « Superfit », hexalobé
ANEX
[Features]
· A high-strength type with an elastomer resin handle.- Remise sur volume
› Configurer maintenantà partir de∗ ： 4.57 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Tournevis de précision polygonal, « Superfit »
ANEX
[Features]
· A high-strength type with an elastomer resin handle.- Remise sur volume
› Configurer maintenantà partir de∗ ： 5.16 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
| Marque |
|---|
| Série du produit |
| à partir de∗ |
| Délai d'expédition minimum |
| Spécifications |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Marque | ANEX | PB SWISS TOOLS | HOZAN | SK 11 | HOZAN | ANEX | SUNFLAG | CUSTOM KOBO | MAEDAKINNZOKU | SUEKAGE TOOL | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | KTC(KYOTO TOOL) | WIHA | WIHA | WERA | HOZAN | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | HOZAN | HOZAN | MAEDAKINNZOKU | MAEDAKINNZOKU | HOZAN | MAEDAKINNZOKU | MAEDAKINNZOKU | HOZAN | ENGINEER | ENGINEER | ENGINEER | ENGINEER | WIHA | ANEX | ANEX | ANEX | ANEX | ANEX |
| Série du produit | Tournevis / tournevis à cliquet déporté avec interrupteur avant/arrière | Lame porte-embout hexagonal 1 / 4 po pour tournevis commutable | Jeu de tournevis SoftFinish® Torx® de précision, avec anneau Magic Ring | ||||||||||||||||||||||||||||||||||||||||||
| à partir de∗ | 4.52 € *Prix unitaire/configuration de base | 20.63 € *Prix unitaire/configuration de base Remise sur volume | 18.91 € *Prix unitaire/configuration de base Remise sur volume | 18.42 € *Prix unitaire/configuration de base Remise sur volume | 9.31 € *Prix unitaire/configuration de base Remise sur volume | 13.49 € *Prix unitaire/configuration de base | 8.33 € *Prix unitaire/configuration de base | 10.31 € *Prix unitaire/configuration de base Remise sur volume | 2.01 € *Prix unitaire/configuration de base | 43.81 € *Prix unitaire/configuration de base | 26.91 € *Prix unitaire/configuration de base Remise sur volume | 25.44 € *Prix unitaire/configuration de base Remise sur volume | 18.64 € *Prix unitaire/configuration de base Remise sur volume | 13.34 € *Prix unitaire/configuration de base | 21.09 € *Prix unitaire/configuration de base | 48.57 € *Prix unitaire/configuration de base | 8.31 € *Prix unitaire/configuration de base | 259.72 € *Prix unitaire/configuration de base | 4.27 € *Prix unitaire/configuration de base | 34.61 € *Prix unitaire/configuration de base | 34.61 € *Prix unitaire/configuration de base | 44.85 € *Prix unitaire/configuration de base | 53.56 € *Prix unitaire/configuration de base | 40.48 € *Prix unitaire/configuration de base | 53.56 € *Prix unitaire/configuration de base | 237.38 € *Prix unitaire/configuration de base | 2.55 € *Prix unitaire/configuration de base Remise sur volume | 3.50 € *Prix unitaire/configuration de base | 58.70 € *Prix unitaire/configuration de base | 40.48 € *Prix unitaire/configuration de base | 6.84 € *Prix unitaire/configuration de base Remise sur volume | 64.90 € *Prix unitaire/configuration de base Remise sur volume | 44.85 € *Prix unitaire/configuration de base | 23.36 € *Prix unitaire/configuration de base | 5.10 € *Prix unitaire/configuration de base | 5.54 € *Prix unitaire/configuration de base | 19.11 € *Prix unitaire/configuration de base | 16.74 € *Prix unitaire/configuration de base | 1.50 € *Prix unitaire/configuration de base | 139.97 € *Prix unitaire/configuration de base | 26.03 € *Prix unitaire/configuration de base | 4.60 € *Prix unitaire/configuration de base | 4.42 € *Prix unitaire/configuration de base | 4.57 € *Prix unitaire/configuration de base | 5.16 € *Prix unitaire/configuration de base |
| Délai d'expédition minimum | Jour même | 5 jours | 7 jours | 7 jours | Jour même | 6 jours | 6 jours | Jour même | 9 jours | 6 jours | Jour même | 9 jours | 9 jours | 7 jours | 6 jours | 3 jours | 3 jours | 6 jours | Jour même | 9 jours | 9 jours | 9 jours | 9 jours | 9 jours | 9 jours | 5 jours | Jour même | 5 jours | 5 jours | 9 jours | Jour même | Jour même | 9 jours | 9 jours | Jour même | 5 jours | 5 jours | 5 jours | 5 jours | 4 jours | 6 jours | 6 jours | Jour même | Jour même | 6 jours |
| Spécifications |
| ||||||||||||||||||||||||||||||||||||||||||||
| Tip standards | Phillips (+) / tête plate (-) / Torx / Autre | Torx | Phillips (+) / tête plate (-) | Combinaison | Phillips (+) | Phillips (+) / tête plate (-) / Combinaison | Phillips (+) / tête plate (-) | Phillips (+) / tête plate (-) | Tête plate (-) | Combinaison | Autre | Boîte | Torx | Torx | Torx | Torx | Torx | Combinaison | - | Tête plate (-) | Phillips (+) | Tête plate (-) | Tête plate (-) | Phillips (+) | Phillips (+) | Phillips (+) / tête plate (-) | Phillips (+) | Phillips (+) / Tête plate (-) / Phillips (+) / tête plate (-) | Tête plate (-) | Tête plate (-) | Tête plate (-) | Phillips (+) / tête plate (-) | Phillips (+) | Tête plate (-) | Tête plate (-) | Tête plate (-) | Combinaison | Autre | Hexagone | Combinaison | Tête plate (-) | Phillips (+) | Bille | Torx | Boîte |
| Tip size / Phillips (+) | N° 00 / N° 0 | - | N° 0 / N° 1 | N° 1 / N° 2 | N° 2 | N° 1 / N° 2 / N° 3 | - | N° 00 / N° 0 / N° 1 | - | N° 1 / N° 2 / N° 3 | - | - | - | - | - | - | - | N° 00 / N° 0 / N° 1 | - | - | N° 2 | - | - | N° 1 | N° 3 | N° 1 / N° 2 / N° 3 | N° 00 | N° 2 / N° 3 / N° 4 | - | - | - | N° 0 | N° 2 | - | - | - | N° 1 / N° 2 | - | - | N° 0 / N° 1 / N° 2 | - | N° 000 | - | - | - |
| Tip size / flathead (-) blade width (mm) B1 | 0.9 ～ 2.1 | - | 1.2 ～ 3 | 4 ～ 6 | - | 6 | 6 | 2 ～ 5 | 3 | 5 | - | - | - | - | - | - | - | 1.5 ～ 3 | - | 6 | - | 6 | 8 | - | - | 5.5 ～ 8 | - | 8 ～ 10 | 0.9 ～ 2.6 | 5.5 | 3 | 1.3 ～ 1.8 | - | 8 | 2.5 | - | 3.5 ～ 5.5 | - | - | - | 9.5 ～ 11 | - | - | - | - |
| Shaft length L (mm) | 10 ～ 24 | 60 ～ 140 | - | - | 100 ～ 300 | - | - | - | 75 | - | - | 60 | 70 | - | 100 | 80 ～ 130 | 80 ～ 130 | - | 25 | 35 | 35 | 100 | 150 | 75 | 150 | 35 ～ 150 | 75 | 36 ～ 80 | - | 75 | 50 | 110 | 100 | 150 | 100 | 28 | - | 100 | 90 | - | 150 ～ 200 | 75 | 75 | 30 | 40 |
| Single Product/Set Classification | Unité / Produit du jeu | Unité | Produit du jeu | Produit du jeu | Unité | Produit du jeu | Unité | Unité | Unité | Produit du jeu | Unité | Unité | Unité | Unité | Unité | Produit du jeu | Unité | Produit du jeu | Unité | Unité | Unité | Unité | Unité | Unité | Unité | Produit du jeu | Unité | Unité / Produit du jeu | Produit du jeu | Unité | Unité | Produit du jeu | Unité | Unité | Unité | Unité | Produit du jeu | Unité | Unité | Produit du jeu | Unité | Unité | Unité | Unité | Unité |
| Shaft type | Rond | Rond | Rond | Carré | Rond | Carré | - | - | Rond | Carré | Rond | Rond | Rond | Rond | Carré | Rond | Rond | - | Rond | Rond | Rond | Rond | Rond | Rond | Rond | Rond | Rond | Carré | Rond | Rond | Rond | Rond | Rond | Rond | Rond | Rond | Rond | Rond | Carré | - | Rond | Rond | Carré | Rond | Rond |
| Magnet | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Shaft through | N/A | N/A | N/A | - | N/A | - | - | - | N/A | N/A | N/A | - | - | - | N/A | N/A | N/A | - | - | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | - | - | N/A | N/A | N/A | N/A | N/A | N/A | N/A | - | N/A | N/A | N/A | Disponible | N/A | N/A | N/A | N/A |
| Bolster | N/A | Inclus / N/A | N/A | - | N/A | - | - | - | N/A | N/A | N/A | - | - | - | Inclus | N/A | N/A | - | - | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | - | - | N/A | N/A | N/A | N/A | N/A | N/A | N/A | - | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Grip Type | Acier inoxydable | Résine | Acier inoxydable | Résine | Caoutchouc | Acier inoxydable | Acier inoxydable | - | Résine | - | Résine | - | - | - | Résine | Caoutchouc | Caoutchouc | Caoutchouc | Caoutchouc | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Résine | Caoutchouc | Résine | Acier inoxydable | Résine | Résine | Acier inoxydable | Résine | Caoutchouc | Résine | Résine | Résine | Résine | Caoutchouc | Résine | Caoutchouc | Résine | Résine | Résine |
| Tip size / flathead (-) blade thickness (mm) B2 | - | - | 0.32 ～ 0.45 | - | - | - | - | - | 0.4 | - | - | - | - | - | - | - | - | - | - | 0.8 | - | 1 | 1.1 | - | - | 0.8 ～ 1.1 | - | - | 0.4 | 0.8 | 0.4 | 0.4 | - | 1.1 | 0.35 | - | - | - | - | - | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | - | - | - | - | - | 2.5 ～ 6 | - | - | - | 4 ～ 6 | - | - | - | - | - | - | - | 1.5 ～ 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5.5 | - | 2.5 | 2 ～ 3 | - | - | 2 ～ 3 | - | 2 ～ 4.5 |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - | - | - | - | 1/4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
- 1
- 2
- 3
- 4
- Suivant >>
Filtrer par :
Stock
-
- Afficher les articles en stock uniquement
-
Tip standards
- Phillips (+)
- Tête plate (-)
- Phillips (+) / tête plate (-)
- Torx
- Boîte
- Hexagone
- Bille
- Combinaison
- Autre
-
Tip size / Phillips (+)
- N° 000
- N° 00
- N° 0
- N° 1
- N° 2
- N° 3
- N° 4
- Autre
-
Tip size / flathead (-) blade width (mm) B1
-
Shaft length L (mm)
-
Single Product/Set Classification
- Unité
- Produit du jeu
-
Shaft type
- Rond
- Carré
-
Magnet
- Disponible
- N/A
-
Shaft through
- Disponible
- N/A
-
Bolster
- Inclus
- N/A
-
Grip Type
- Résine
- Poignée en bois
- Caoutchouc
- Acier inoxydable
-
Tip size / flathead (-) blade thickness (mm) B2
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Fabricant
-
- PB SWISS TOOLS (33)
- ANEX (18)
- MAEDAKINNZOKU (16)
- HOZAN (10)
- KTC(KYOTO TOOL) (9)
- SK 11 (9)
- WERA (8)
- ENGINEER (7)
- TRUSCO NAKAYAMA (6)
- WIHA (4)
- HIRAI KOGU (3)
- SUNFLAG (3)
- EIGHT TOOL (2)
- E VALUE (2)
- SIGNET (2)
- SUEKAGE TOOL (2)
- TRAD (2)
- CUSTOM KOBO (1)
- SMATO (1)
- AS ONE (0)
- HANDIWORK (0)
- MATADOR (0)
- プロクソン (0)
- RITTAL (0)
- OSG (0)
- WEIDMUELLER (0)
- BAHCO (0)
- VESSEL (0)
- HAZET (0)
- BERNSTEIN AG (0)
- KNIPEX (0)
- PHOENIX CONTACT (0)
Type de données CAO
-
- 2D
- 3D
Catégories relatives à « Tournevis »
-
- Clés / clés polygonales /clés à cliquet
- Clés à six pans
- Clés anglaises
- Clés Torx
- Clés à douille
- Clés dynamométriques
- Tournevis
- Tournevis dynamométriques
- Pinces/tenailles
- Marteaux
- Ensembles d'outils / boîtes à outils
- Cutters
- Ciseaux
- Embouts de tournevis
- Embouts à douille
- Pieds-de-biche / leviers
- Extracteurs
- Brucelles
- Graveurs / poinçons
- Outils d'entretien automobile
- Outils de plomberie et de climatisation
- Outils de découpe
- Outils d'isolation
- Outils pour la tôle
- Outils de calfeutrage
- Outils destinés aux installations électriques
-
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.